- The Team Group GA Pro is pretty hard to find right now, for this review we've been using a price point of $270 for the 2 TB variant.
- Fantastic 4K Random IO write speeds
- Solid real-life performance
- Impressive sequential transfer rates
- Excellent sustained write performance
- Large SLC cache
- 4 TB and 8 TB model available
- Five-year warranty
- Compact form factor
- In real-life not faster than competing Gen 4 drives, but still more expensive
- Very high power consumption
- QD1 sequential read surprisingly low
- High idle power consumption (desktop and mobile)
- Bundled heat spreader is much too weak to properly cool the drive
- Drive crashes after long periods of thermal throttle
Technology & Positioning
The Team Group GA Pro is Team Group's third PCIe Gen 5 SSD using the InnoGrit IG5666 controller. The differences between the GA Pro, GC Pro and GE Pro are fairly small, they all use the same controller and YMTC 232-layer TLC NAND flash with DRAM cache. On the GA Pro, a Micron DRAM cache chip is used, whereas the GC Pro uses Hynix. Some internal clock frequencies are different, too. While it's surprising that they are releasing different SKUs for such minimal differences, I actually appreciate it, because it means you can be certain that there are no hidden changes to components, settings or specs down the road, that you might not be aware of. This is a huge issue for almost all SSD vendors, so I like what Team Group is doing. It would be nice though if they were more transparent about the exact changes, so potential customers have more information available to inform their buying decision.
Synthetic Performance
Synthetic performance results of the Team Group GC Pro are highly impressive when it comes to 4K random write IO. Here the drive is the fastest by quite some margin, which suggests InnoGrit's controller is doing a great job handling this workload. Random reads are good, but well behind other modern drives. While sequential writes are good, with 7.5 GB/s, sequential reads are surprisingly low for a Gen 5 SSD, just 3.7 GB/s, which is lower than even most Gen 4 SSDs. I've retested this several times and formatted the drive in-between. For higher queue depths the drive does indeed achieve transfer rates of 10 GB/s+ for both read and write.
Real-Life Performance
Controller vendors have been optimizing their controllers for typical synthetic reviewer workloads on an empty drive. That's why it's important to also include real-life testing. We're even running those tests with the drives filled to 85% capacity, not empty. This approach puts additional pressure on the various algorithms and the SLC cache, just like in real-life. Here the Team Group GA Pro does well, but ends up a few percentage points behind other Gen 5 drives in our lineup. The new generation of Gen 5 SSDs with modernized controllers—like the Hynix P51 Platinum, Corsair MP700 Pro XT (Phison E28) and WD Black SN8100 (SMI SM2508)—are even up to 11% faster. The GA Pro roughly matches the best Gen 4 SSDs, like the Samsung 990 Pro, Crucial T500, Solidigm P44 Pro and Lexar NM790. The new WD Black SN7100, the fastest Gen 4 SSD we ever tested, is still 4% ahead—at much lower pricing and power consumption. Of course that doesn't mean that the GC Pro is "slow"—quite the opposite, it blazed through all our workloads, but given the Gen 5 marketing I definitely expected more.
SLC Cache/Sustained Performance
Team Group's drive comes with an SLC cache size of 600 GB (or 90% in SLC mode), which is enough to soak up nearly all bursts of write activity. Once the SLC cache is exhausted, transfer rates still reach a solid 1.5 GB/s. Filling the whole 2 TB capacity completed at a very good 2.1 GB/s, which is faster than nearly all Gen 4 SSDs, and faster than the Samsung 9100 Pro, but still quite a bit behind the top drives in this test.
Power Consumption/Heat
For a Gen 5 controller, power consumption is very important, because it directly influences the heat output of the whole drive. Our power consumption tests reveal that the IG5666 is consuming a lot of power, more than the Phison E26. While we've all been complaining about high idle power consumption on the Phison E26, the IG5666 is on a completely different levels. Sitting idle, doing nothing, the drive consumes 4.5 W! This is more than many M.2 NVMe drives at full load. When tested with PCIe ASPM power savings enabled, like in a laptop, it still draws 2.5 W, suggesting that it can't reach its lower power states in a mobile scenario. The problem is that all this heat has to go somewhere. While Team Group bundles a thin heat spreader with the drive, this is absolutely not sufficient and the drive will throttle within seconds. Even with a medium-sized aftermarket heatsink there will be throttling when heavily loaded. During our testing, we also noticed a concerning issue: when throttling occurs for extended periods, the controller eventually shuts off, which could potentially lead to an OS crash and potential data loss. In contrast, more modern Gen 5 SSDs perform much better in this regard.
Pricing & Alternatives
SSD prices are fairly unstable right now and have almost doubled in the last months. The whole pricing structure of the market currently feels completely absurd—some entry-level drives are extremely overpriced, with 1 TB models costing as much as 2 TB models from other vendors, and so on. What I like is that the GA Pro is available in capacities of 4 TB and 8 TB—which is still pretty rare for the market, and possibly the biggest capacity we'll see for quite a long time, given the current market trends. I'm using a $270 price point for the 2 TB model of the GA Pro, and it might not even be available at that price point. Given what the drive offers, I think it should be priced much more similarly to Gen 4 drives than Gen 5 models. The biggest caveats are the higher power consumption and heat output, and the performance that's considerably lower than more modern designs. Strong alternatives are the various Phison E28 and SMI SM2508 drives on the market, if you're looking for performance, and of course the various Gen 4 SSDs if you prefer to save some money. Candidates worth exploring are the WD Black SN7100, Lexar NM790 (and other MAP1602 drives), Samsung 990 Pro, Crucial T500, Hynix P41, possibly WD SN770, too.