TerraMaster D1 SSD Pro is a high-end portable SSD enclosure that lets you connect a fast M.2 NVMe Gen 4 SSD to your PC or Mac over Thunderbolt 5, the fastest consumer interconnect. With a lavish 80 Gbps of per-direction bandwidth, the enclosure puts out an M.2-2280 slot with PCI-Express 4.0 x4 bandwidth. When connected to a Thunderbolt or USB4 interface, it exposes your drive as a proper, PCI mapped NVMe device. It also supports USB 3.2 or older standards. Its most striking aspect is that it lacks any fans, relying entirely on the sheer mass of its anodized aluminium body to serve as a heatsink for both your M.2 NVMe SSD, and its own constellation of bridge chips.
To test the enclosure, we used a Samsung 990 Pro 1 TB, a high-end Gen 4 NVMe SSD. Our test machine has an ASUS ThunderboltEX 5 add-on card paired with an Intel Arrow Lake-S Core Ultra 7 processor, on a Z890 platform. Windows 11 lets you verify that a Thunderbolt or USB4 device is properly configured by letting you see its negotiated upstream and downstream bandwidth, just like a network connection. The Thunderbolt 5 card has its own 6-pin PCIe power input to ensure up to 130 W power delivery. We verified that our enclosure has a proper 80 Gbps bidirectional connection, and proceeded with our testing.
We are happy to report that the TerraMaster D1 SSD Pro utilizes the full 80 Gbps bandwidth, providing performance otherwise not possible with a 40 Gbps USB4 or Thunderbolt 4 connection. You get sequential read speeds of over 6.2 GB/s, and sequential write speeds of over 5.2 GB/s. Our mixed load test, where we subject the drive to a 50% mixture of read and write traffic, sees sequential transfers well over 7 GB/s—something not possible with Thunderbolt 4. The closest competitor to this enclosure is the OWC Envoy Ultra, an external Thunderbolt 5 SSD. The D1 SSD Pro + Samsung 990 Pro combo is able to post a 4% performance gain over the Envoy Ultra when averaged across all tests.
Herein lies our first gripe with the enclosure. Sure, it's faster than the Envoy Ultra SSD, it's the fastest solution we've tested, but it doesn't exactly max out the Samsung 990 Pro, when compared to the drive being directly installed on the motherboard. The enclosure enjoys 80 Gbps bidirectional bandwidth, and even when accounting for the various interface overheads, it should in theory max out PCI-Express 4.0 x4 (64 Gbps per direction), but it doesn't. We could tell that the SSD isn't running into thermal limits looking at our sustained writes benchmark, which fills up the entire disk with a relentless write operation. Here, the 990 Pro is able to perform nearly as well as it should on a motherboard.
All this said, the D1 SSD Pro is very easy to live with—easy to install, and is easy to carry around with its included Nylon case. It is designed more as something that will sit on your desk for extended periods, than something you just plug in for brief file-transfer sessions. Creative professionals should find the lack of a fan a strong point, there's no annoying tiny fan.
The enclosure is heavy—300 g on its own, not exactly something you carry around in your clothing, but something you toss into a carry-on bag. TerraMaster's designers took care to ensure the enclosure doesn't have any sharp edges, but the included Nylon case is a must-have. It has smooth, textured surfaces, and a fishnet pocket for the cable. A minor gripe is that the included screwdriver doesn't fit in this case. So if you have to swap out the internal drive, you'll need to carry it around separately.
Another not-so-minor gripe with this enclosure is its maximum SSD capacity limit of 8 TB. This may not be a problem for most users, but we've seen 40 Gbps-class enclosures based on ASMedia ASM2464PD single-chip solution offer support for up to 16 TB drive capacities. Also, there's no support for smaller M.2 form-factors such as M.2-2242 or M.2-2230, which is somewhat understandable when you see the sheer combination of five different controllers on the PCB.
A big plus with this enclosure is its included TPC Backupper software that you get as a downloadable. Even though you only get the basic version (with a premium version priced over $60), you still get plenty of tools, such as whole-disk cloning, system backups, basic data sync, and lots more.
Even at its introductory price of $199, the D1 SSD Pro enclosure isn't cheap. 40 Gbps-class enclosures can be had for half this price, but those tend to have fans. Fanless 40 Gbps enclosures are typically priced around $120. The cheapest 80 Gbps-class enclosures, such as the AGEENTech, are priced at $160, however, these are lightweight, and rely on fan-based cooling—not something a focussed content creator would prefer over a fanless solution. If I was in the market for an 80 Gbps enclosure, this is the one I'd go for, simply because it doesn't make noise.