Thermaltake View 600 TG Butter Caramel Review 23

Thermaltake View 600 TG Butter Caramel Review

Review System Setup »

A Closer Look - Inside


As previously mentioned, all glass panels may be removed, so that you don't end up breaking any of them during the build process. This is certainly good as the View 600 TG is a tall chassis. Thermaltake has focused on a functional interior design using a classic layout, while also trying to make the most use of the space. There are no aspects that really push any boundaries or are unique, but that simply means that you will get functionality and stability, as nothing is being re-invented here. The chassis is capable of holding BTF equipped motherboards as well, so you will have an easier time keeping things nice and tidy.


The shroud is completely vented, but actually sports a layer which you will have to remove when wanting to install 140 mm fans. For those looking to secure 120 mm units or a radiator on the floor, that extra plate on top will come in handy. There is also a pair of mounting holes for vertical GPU placement as well as a small cover for the side intake fan mount, so that you can really keep things clean and tidy. You may remove the two covers on the side of the shroud to give you some additional access points to this area of the View 600 TG, in case you want to clean the dust filters of these panels.


In the rear the PSU bay comes equipped with two foam strips as an anti-vibration measure. It is big enough to easily fit potent PSUs. Above that you will find the eight expansion slots. These are bridge-less and come with individual, reusable covers secured using classic black screws. In the very top, the cooling mount provides plenty of room as well to accommodate parts like radiators, which may be slightly bigger than fans.


The Thermaltake View 600 TG can accommodate vertical GPUs by allowing you to rotate its expansion slots. The plate is secured by four screws, making that process pretty straightforward. When turned, you still have access to up to five expansion slots, so even the thickest GPUs should have no issues fitting.


On the floor towards the front of the case, you will find a HDD cage which may hold up to two drives. You may either add one 2.5" and a 3.5" variant or go for two 3.5" units. The cage sits on rails, with a third rail present, so you could move it over one, if needed, but by placing it away from the side cooling bracket, it will not interfere with any such elements. Above that, it is all about that aforementioned cooling bracket, which comes with mounting holes for three 120 or 140 mm fans or radiators based on those cooling units. This is exactly the same loadout as the top can handle. As such the Thermaltake View 600 TG is capable of being equipped with three 420 mm radiators at the same time, which further underscores Thermaltake's focus on utilizing the size and space of the chassis well.


Looking at the insides from the backside of the chassis, you can see that the side cooling bracket may be removed. The diving cover is actually secured to the mounting plate instead of the shroud. Thermaltake also includes a storage plate which can hold either two 2.5" drives or one 3.5" unit. This means that the View 600 TG will be able to accommodate most build scenarios in terms of this type of storage, as it can fit up to four of them.


The front panel connector has been unified, which will make this step of the assembly process a breeze as well. All the wiring for the IO uses flat-band cables, so that you can easily bend them - something that comes in handy when plugging them into the ports of a BTF equipped board.
Next Page »Review System Setup
View as single page
Nov 19th, 2026 01:27 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts