TOPPING ArpegEar Hane In-Ear Monitors Review 0

TOPPING ArpegEar Hane In-Ear Monitors Review

(0 Comments) »

Introduction

Topping Logo

TOPPING is a brand many of us here are familiar with, especially those who have taken a step away from onboard audio solutions and gone with a dedicated audio source or interface. We have covered several TOPPING products already, be it across different product lines, including DACs (digital to analog converters) and headphones amplifiers. These would be used with a transducer such as speakers or headphones/IEMs, and TOPPING's contribution to this chain would be in the so-called upstream area thus. At least until the company decided to get a piece of the highly competitive and lucrative IEMs market. Enter ArpegEar, a new brand from the same parent company, and today we examine its first product—the Hane set of IEMs.


Technically this is a review of an ArpegEar product thus, not one from TOPPING. However, I took the liberty of adding the TOPPING brand name in the title to help this otherwise new brand get more eyes on it, and the lack of an easily available website/logo made the decision easier for me. The Hane uses a single dynamic driver per side, and this alone would probably not have got it much attention. However, what makes it more noteworthy is the part where it has a substantially higher impedance—even compared to many over-ear headphones—and has tuning switches that aim to make a tangible difference to the listening experience, effectively allowing you to customize the frequency response to better match your preference without using software/hardware EQ. Thanks to TOPPING for providing a review sample to TechPowerUp, and let's begin our coverage with a look at the product specifications in the table below.

Specifications

ArpegEar Hane In-Ear Monitors
Shell:Resin shells with decorative faceplate
Cable:2-strand cable with high-purity copper conductor
Driver Units:10 mm dynamic driver
Frequency Response:5 Hz–35 kHz
Sensitivity:115 dB/Vrms (@1 kHz)
Impedance:80 Ω ± 15% (@1 kHz)
Cable Connectors:3.5 mm TRS plug to source + two 0.78 mm 2-pin plugs to IEMs
Cable Length:4.9 ft/1.5 m
Warranty:One year

Packaging and Accessories


This being a debut product of a debuting brand, I had no idea what to expect out of the unboxing experience when it comes to the ArpegEar Hane. The product box goes for a light blue sleeve over a black cardboard base, with the brand and product name on the front and specifications on the back, where we also see factory provided frequency response curves to better illustrate the various tonalities on offer here thanks to the tuning switches. Remove the sleeve and open the box to reveal the IEMs neatly packed in a thick foam sheet with machined compartments to snugly protect them. The IEMs also come with a clear plastic wrap around the faceplate and shells to further prevent any scratches or residual dust on them.


ArpegEar provides a multi-language user manual alongside that goes over the setup and use of the IEMs. The other accessories are found in the bottom layer, with the left side containing a plastic ziplock bag that has the IEM cable inside. We get a drawstring-style soft fabric pouch to help store and carry the IEMs with you, a tool to help use the tuning switches on the IEMs, and a plastic ear tip case that has six pairs of ear tips inside. We get three sets of generic silicone tips in sizes S/M/L, a more malleable set of silicone tips in size M, and two sets of foam tips in sizes S/M.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 16th, 2026 13:21 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts