Introduction
With memory prices continuing to plummet, now is a great time to be looking for memory upgrades. Summer hardware releases are in full swing, there is competition from both Intel and AMD, and the Red brand has thoroughly fixed the memory issues of generations past. No longer do users have to worry about memory compatibility or shopping for expensive AMD-branded kits. With 3200 MHz natively supported on the new Ryzen platform, options for enthusiasts have never been more open. V-Color, established in 2006, is a growing brand committed to providing the best memory solutions available. Now with over a decade of experience, V-color is committed to adapting and integrating the latest technology into their DRAM products. To that end, V-Color presents the new PRISM II RGB line of DDR4 memory kits.
The V-Color PRISM II RGB comes in speeds of up to 4133 MHz and capacities of up to 16 GB (2 x 8 GB). To assist both appearance and performance, the V-Color PRISM II RGB also features a copper alloy heat spreader in silver or black. Finally, it boasts software certifications with all four major motherboard vendors and seven different colors of the pastel RGB LED diffuser to match and add flair to a wide range of builds.
The V-Color PRISM II RGB kit I have for testing today is V-Color's middle model: 16 GB (2 x 8 GB) 3600 MHz at 18-22-22-42 and 1.35 V. This spec is of particular note to new AMD adopters because of the 3600 MHz sweet spot for the latest Ryzen processors. With twice the benchmarks to go through, let's not waste any more time! How will the V-Color PRISM II RGB perform?
Specifications
| Specifications |
|---|
| Manufacturer: | V-Color |
|---|
| Model: | TL8G36818C-E0P2SOFK |
|---|
| Speed Rating: | DDR4-3600 |
|---|
| Rated Timings: | 18-22-22-42 |
|---|
| Tested Capacity: | 16 GB (8 GB x2) |
|---|
| Tested Voltage: | 1.35 V |
|---|
| PCB Type: | 10 layers |
|---|
| Registered/Unbuffered: | Unbuffered |
|---|
| Error Checking: | Non-ECC |
|---|
| Form Factor: | 288-pin DIMM |
|---|
| Warranty: | Limited Lifetime |
|---|
Packaging
The V-Color PRISM II RGB packaging is a sleek satin black cardboard box. "V-Color" is in the center, with the "PRISM II" on the top. A badge for the capacity and RGB is on the bottom left and right, with the V-Color website listed on the bottom. The back of the box has a bullet list of features, as well as the full specification stickers.
The V-Color PRISM II RGB packaging is well designed and definitely fits the premium minimalist theme. I would have liked a picture of the sticks to be included, as well as a reference for brick-and-mortar shoppers.
Inside is a pair of stacked together plastic trays along with a cleaning cloth. The memory sticks are held firmly and kept quite safe from all but the most careless handling.
A Closer Look
Other than the faceted pastel LED diffusion bar, the V-Color PRISM II RGB sticks cut a generally rectangular profile. The pastel diffuser comes in seven different colors; my sample kit included a green and an orange stick.
The V-Color PRISM II RGB sticks have a copper alloy heat spreader with a near-mirror silver finish. A large "V" is stamped into the center of each heat spreader.
The V-Color PRISM II RGB sticks come with a micro-fiber cleaning cloth to help protect the silver finish, which is quite the fingerprint magnet. A nice touch preventing a sticker from breaking up the theme, the 3600 MHz XMP timings of 18-22-22-42 at 1.35 V are instead laser cut into the heat spreader of the the V-Color PRISM II RGB.
"V-Color" is laser cut into the bottom-right side of the stick, across from the specifications, with the compliance and origin laser cut into the back.
The V-Color PRISM II RGB are single-sided and use a 10-layer PCB for added stability.
The backside has the controller for the RGB LEDs, of which there are five on each side.
The markings on the ICs seem to be V-Color specific, though Thaiphoon shows that these are Hynix CJR chips. The PCB is made by Brain Power, which is a common supplier.
I like to weigh a stick from each kit I get as the difference in mass can be pretty drastic between kits. Mass is not the best indicator of cooling efficiency because material can matter, and of course, heat dissipation is reliant on surface area, not volume or mass. That said, it is still interesting to compare.
The V-Color PRISM II RGB comes in at 77.04 g on my scale, which is on the high end. The copper alloy heat spreader is heavier than aluminium counterparts. For height, the V-Color PRISM II RGB comes in at just over 42 mm with my calipers, a little below the average 45–50 mm range and great for cooler clearance.