Introduction
Western Digital (or simply WD) is the world's largest manufacturer of storage solutions, mostly known for their wide range of hard disk offerings. With their acquisition of Sandisk in 2016, WD became one of the largest manufacturers for flash storage, too. In 2025, the companies separated. Sandisk is now responsible for all flash products, including SSDs, and WD will focus on mechanical hard drives.
The WD Black SN8100 is Sandisk's first PCI-Express 5.0 SSD, built using the recent Silicon Motion SM2508 controller, which is designed for efficiency and thus reduced thermal output. Previously, WD used their own in-house controllers for their SSDs, but they have now switched to the SM2508. We've seen this controller before on several reviews, like the Crucial T710, Kingston Fury Renegade, Lexar NM1090 and Acer Predator GM9000. Several other drives using the SM2508 have also been announced recently, and we'll be reviewing many of them in the future.
Besides the SMI controller, Sandisk is using the modern Kioxia BiCS8 218-layer 3D TLC NAND, operating at 3600 MT/s. Also onboard is a DRAM cache—2 GB of DDR4-3200 memory, used to manage the SSD's internal data structures.
The WD Black SN8100 is available in capacities of 1 TB ($155), 2 TB ($220) and 4 TB ($450). An 8 TB model is coming out later this year, a model with heatsink is available, too for an additional $30 or so. The endurance is set to 600 TBW, 1200 TBW and 2400 TBW respectively. Sandisk includes a five-year warranty with the WD SN8100 SSD.
| Specifications: WD_Black SN8100 2 TB SSD |
|---|
| Brand: | Sandisk WD |
|---|
| Model: | WDS200T1X0M-00CMT0 |
|---|
| Capacity: | 2000 GB (1862 GB usable) 48 GB additional overprovisioning |
|---|
| Controller: | Silicon Motion SM2508 Rebranded as SanDisk A101-250800-AC |
|---|
| Flash: | Kioxia 218-layer BiCS8 3D TLC SanDisk 025255 1T00 |
|---|
| DRAM: | 2 GB Micron DDR4-3200 D8CJX / MT40A1G16TB-062E:F |
|---|
| Endurance: | 1200 TBW |
|---|
| Form Factor: | M.2 2280 |
|---|
| Interface: | PCIe Gen 5 x4, NVMe 2.0 |
|---|
| Device ID: | WD_BLACK SN8100 2000GB |
|---|
| Firmware: | 830ZRR02 |
|---|
| Warranty: | Five years |
|---|
Price at Time of Review: | $220 / $110 per TB |
|---|
Packaging
The Drive
The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.
PCI-Express 5.0 x4 is used as the host interface to the rest of the system, which doubles the theoretical bandwidth compared to PCIe 4.0 x4.
On the PCB you'll find the controller and two flash chips, a DRAM cache chip is included, too.
The sticker is just a plastic sticker, there is no metal core, so the thermal properties are slightly worse than a sticker with a metal core.
Chip Component Analysis
The Silicon Motion Technology SM2508 controller is the company's first PCI-Express 5.0 controller for consumer applications. It supports PCIe 5.0 x4 and runs with eight flash channels at 3600 MT/s. SMI fabricates the controller using a 6 nanometer process at TSMC Taiwan. Sandisk has rebranded the controller to SanDisk A101-250800-AC.
The two flash chips are Kioxia BiCS8 218-layer 3D TLC NAND, rebranded to SanDisk 025255 1T00. Each chip has a capacity of 1 TB.
The Micron DRAM cache chip has a capacity of 2 GB and runs at DDR4-3200.
Test Setup
Synthetic Testing
- Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
- Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
- All write requests contain random, incompressible data.
- Disk cache is flushed between all tests.
- During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.
Real-life Testing
- After initial configuration and installation, a disk image is created; it is used to test every drive.
- Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
- Our disk image consumes around 700 GB—partitions are resized to fill all available space on the drive.
- All drives are filled with random data to 85% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
- Partitions are aligned properly.
- Disk cache is flushed between all tests.
- In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
- All application benchmarks run the actual application and do not replay any disk traces.
- Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.
- During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.