Western Digital (or simply WD) is the world's largest manufacturer of storage solutions, mostly known for their wide range of hard disk offerings. With their acquisition of Sandisk in 2016, WD became one of the largest manufacturers for flash storage, too. In 2025, the companies separated. Sandisk is now responsible for all flash products, including SSDs, and WD will focus on mechanical hard drives.
The WD Blue SN5100 is the successor to the WD Blue SN5000, which was released in Spring last year. Just like the predecessor it uses a PCI-Express 4.0 interface with QLC NAND flash. The big difference vs the SN5000 is that Sandisk has installed their newest 218-layer BiCS8 flash on the SN5100, the SN5000 uses the older 112-layer BiCS5 TLC or 162-layer BiCS5 QLC for the 4 TB model, the SN5000S uses 162-layer QLC BiCS6. In terms of controller, you're getting the Sandisk Polaris 3, which is also used on the WD SN7100—the fastest PCIe 4.0 SSD we've ever tested. As expected from a value-positioned solid-state drive, there is no dedicated DRAM cache chip for the mapping tables of the SSD, but the SN5100 will use up to 64 MB of the host's memory through the Host-Memory-Buffer mechanism.
The WD Black SN5100 is available in capacities of 500 GB ($55), 1 TB ($80), 2 TB ($150) and 4 TB ($300). The endurance is set to 300 TBW, 600 TBW, 900 TBW and 1200 TBW respectively. Sandisk includes a five-year warranty with the WD SN5100 SSD.
Sandisk 218-layer BiCS8 3D QLC SanDisk 028657 2T00
DRAM:
N/A, but 64 MB HMB
Endurance:
600 TBW
Form Factor:
M.2 2280
Interface:
PCIe Gen 4 x4, NVMe 2.0
Device ID:
WD Blue SN5100 2TB
Firmware:
3523M0WD
Warranty:
Five years
Price at Time of Review:
$150 / $75 per TB
Packaging
The Drive
The drive is designed for the M.2 2280 form factor, which makes it 22 mm wide and 80 mm long.
PCI-Express 4.0 x4 is used as the host interface to the rest of the system.
On the PCB you'll find the controller and just one flash chip, a DRAM cache chip is not included.
Chip Component Analysis
WD's new A101-000172-A1 "Polaris 3" controller is designed for DRAM-less operation using four flash channels. It supports HMB, to use a small portion of the system's memory for the mapping tables of the SSD.
The single flash chip is a Kioxia 218-layer 3D QLC NAND, it has a capacity of 2 TB.
Windows 11 Professional 64-bit 23H2 VBS enabled (Windows 11 default)
Drivers:
NVIDIA: 552.12 WHQL
Synthetic Testing
Tests are run with a 20-second-long warm-up time (result recording starts at second 21).
Between each test, the drive is left idle for 60 seconds, to allow it to flush and reorganize its internal data.
All write requests contain random, incompressible data.
Disk cache is flushed between all tests.
During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.
Real-life Testing
After initial configuration and installation, a disk image is created; it is used to test every drive.
Automated updates are disabled for the OS and all programs. This ensures that—for every review—each drive uses the same settings, without interference from previous testing.
Our disk image consumes around 700 GB—partitions are resized to fill all available space on the drive.
All drives are filled with random data to 85% of their capacity. This is intentional, to run the drive in realistic operating conditions—nobody uses a nearly-empty SSD in their system. It also puts additional stress on the pseudo-SLC cache subsystem, because there is less free NAND space to work with.
Partitions are aligned properly.
Disk cache is flushed between all tests.
In order to minimize random variation, each real-life performance test is run several times, with reboots between tests to minimize the impact of disk cache.
All application benchmarks run the actual application and do not replay any disk traces.
Our real-life testing data includes performance numbers for a typical high-performance HDD, using results from a Western Digital WD Black 1 TB 7200 RPM 3.5" SATA. HDDs are significantly slower than SSDs, which is why we're not putting the result in the chart, as that would break the scaling, making the SSDs indistinguishable in comparison. Instead, we've added the HDD performance numbers in the title of each test entry.
During these tests, M.2 drives are tested with additional active fan-cooling, to ensure thermal throttling can't happen.