XPG Lancer Blade RGB DDR5-5600 16 GB CL46 Review - Low Profile 23

XPG Lancer Blade RGB DDR5-5600 16 GB CL46 Review - Low Profile

Intel 13900K Frametime Analysis: Counter-Strike 2 »

Frametime Analysis

We present a more in-depth analysis than just average FPS to show how the frame rate changes over time, which helps highlight FPS drops. Minimum FPS at both the 95th and 99th percentile are reported in these charts, too. A second chart, a histogram, shows shape and spread for the frametime data—how tightly grouped the measurements are. The "IQR" result is called "Interquartile Range," which is an outlier-resistant statistical value that tells us the range in the middle of the frametime distribution.

Location: Baldur's Gate City





In our testing of Baldur's Gate 3, a game that demands both high frequency and low latency, the XPG Lancer Blade RGB DDR5-5600 16 GB memory finds itself lagging behind once more. Although the average difference is just 7 FPS, this still translates to an 8% performance gap between both JEDEC 5600 kits simply because it has fewer ICs on the PCB.


In Baldur's Gate 3 on the AMD Ryzen 9950X, the XPG Lancer Blade RGB 5600 again sits at the bottom of the chart with a 100% baseline, and this title makes the IC-count penalty even more pronounced than in Counter Strike 2. The JEDEC DDR5-5600 kit running the identical 46-45-45-90 timings and frequency as the XPG's own XMP profile, but on a full 16 GB DIMM with double the IC population, pulls ahead by 4.7% in Average FPS and a substantial 7.34% in 1% Lows. Even JEDEC DDR5-4800, at a noticeably lower frequency, still manages to beat the XPG kit by 3.28% and 4.75% respectively. BG3's heavy memory sensitivity really punishes the bandwidth shortfall here, with the gap to the top of the chart stretching to nearly 15% in Average FPS and 18% in 1% Lows against DDR5-6400. As with the CS2 results, this is the clearest possible evidence that the physical IC count on the DIMM (4 per module) on the XPG kit versus the standard 8 is a bandwidth bottleneck that timings and frequency alone can't overcome, and in a title as demanding as Baldur's Gate 3, that bottleneck translates into a very real performance deficit.





Even at 4K in Baldur's Gate 3, the XPG Lancer Blade RGB 5600 still trails the entire field, coming in last at in 1% Lows and in 5% Lows. A notable exception to the usual 4K trend where GPU-bound rendering typically erases memory differences. The JEDEC DDR5-5600 kit, again running identical timings and frequency but on a fully populated 16 GB DIMM, still beats it by roughly 6.8 FPS in 1% Lows and nearly 6 FPS in 5% Lows, while the top kits like DDR5-8000 and DDR5-7600 pull ahead by close to 10 FPS in both metrics. This shows that Baldur's Gate 3 remains unusually CPU/memory-sensitive even at 4K, likely due to its heavy simulation and pathing workload, meaning the XPG kit's reduced bandwidth from its half-populated 4-IC DIMMs continues to be a limiting factor even in a resolution where the GPU is typically the bottleneck for most other titles.
Next Page »Intel 13900K Frametime Analysis: Counter-Strike 2
View as single page
Nov 18th, 2026 20:18 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts