XPG Lancer RGB DDR5-7200 CL34 2x 16 GB Review - MERA Edition 8

XPG Lancer RGB DDR5-7200 CL34 2x 16 GB Review - MERA Edition

(8 Comments) »

Introduction

XPG Logo

Founded in 2001, ADATA is one of the largest manufacturers of flash memory and DRAM in the world and has steadily grown into what it is today: a leader in the industry. From enterprise to consumers, ADATA has multiple product lines to fit different markets, with the XPG subdivision targeting PC enthusiasts and branded as such.

XPG offers multiple DDR5 products, with the current three main consumer system memory lines being Caster, Lancer, and Hunter. XPG Hunter fulfills the basic user needs, while the Lancer memory aims to target a wide market offering both non-RGB and RGB SKUs, pre-binned and sold in various configurations from 5200 MT/s to 7200 MT/s. Lastly is the XPG Caster performance and PC enthusiast oriented system memory series, with the lowest frequency kit currently offered starting at 6000 MT/s and also featuring a blisteringly fast 8000 MT/s kit showcased during CES 2023.


In this review, we will be taking a closer look at the XPG Lancer RGB DDR5-7200 - Limited MERA Edition memory kit targeting Anime fans and PC enthusiasts. XPG has created an open-ended story for the hero Mera, who is battling a unknown force that has taken her sister and threatens to remove the color red from her world and every planet it touches. While this is a limited edition, the memory itself, beyond the aesthetics, is the same XPG Lancer memory underneath. Memory kit configurations for XPG Lancer RGB series include 32 GB (2x 16 GB) and 64 GB (2x 32 GB) with binned frequencies ranging from 5200 MT/s to 7200 MT/s. Using modest timings of 34-46-46-116 at 1.40 V for its 7200 XMP profile, this memory kit reviewed today isn't compatible with all Intel systems, but is still in high demand. Follow along as we pair this with an Intel Z790 motherboard, Intel 13th Generation 13900K Processor and find out what performance gain XPG brings us.


Specifications

Specifications
Manufacturer:XPGXPGXPG
Series:Lancer RGBLancer RGBLancer RGB
Model:AX5U7200C3416G-BLARMLBKAX5U7200C3416G-BLARMLBKAX5U7200C3416G-BLARMLBK
Memory Profile:JEDECXMP-1EXPO-1
Speed Rating:DDR5-5600 MT/sDDR5-7200 MT/sDDR5-7200 MT/s
Rated Timings:40-40-40-70-11734-46-46-116-16234-46-46-116-162
Tested Capacity:32 GB (2x 16 GB)32 GB (2x 16 GB)32 GB (2x 16 GB)
Tested Voltage:1.1 V1.40 V1.40 V
Registered/Unbuffered:UnbufferedUnbufferedUnbuffered
Error Checking:ECC (resting)ECC (resting)ECC (resting)
IC Manufacturer:SK HynixSK HynixSK Hynix
Form Factor:288-pin DIMM 288-pin DIMM 288-pin DIMM
Warranty:Limited LifetimeLimited LifetimeLimited Lifetime

Packaging


The XPG Lancer RGB DDR5-7200 packaging is easy to identify because of the distinct colors XPG uses for its branding. When it comes to the production details, the packaging provides all the information to make an informed decision on the spot.

Clearly listed across the bottom are the type of memory, module densities, and configuration setup. XPG is also one of the few companies currently using the memory speed correctly by listing it as MT/s and not MHz. Though not a big deal overall, it is great to see this change. At the top are the RGB badges showing official support for ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync.

Flip the box around and on each DIMM, the SKU number and primary timings can be seen through the cutout. If you are still looking for more information, a QR code can be used to access extra details about the XPG Lancer RGB DDR5-7200 memory kit.


The box has some tape to prevent anything from falling out during shipping. Once cut and removed from the outer packaging; the memory sticks are secured and protected from minor damage with a clamshell inside the outer box.

A Closer Look


XPG Lancer RGB is available with either White or Black heatspreaders. The special limited Lancer MERA edition featured in this review is unfortunately only sold with black heatspreaders. Although, a color swap would go against the established lore that XPG has presented, even if it's a bit vague on the details. The MERA edition holds some similarities, like the physical dimensions and overall memory heat spreader characteristics, but changes some of the design elements from the stock lancer modules as well. As such, for all intents and purposes, whether you buy this special edition or the normal Lancer version, besides decorative distinctions between the two, both should be considered the same in terms of the performance metrics.



XPG has given this Lancer memory the MERA treatment. With the character's face on the right and some unique patterns on the left that are mirrored the other side as well. XPG does a decent job of the standard SCI-FI Anime character that from a distance could be mistaken for a Manga character that already exists.


On one side of each DIMM module is the identification sticker listing the SKU, rated XMP / EXPO operating frequency and applied voltage for said memory profile.


Laying the DIMMs on the side, you can see "XPG" in bold black lettering in the center. The entire plastic strip in the middle will be illuminated when the system is powered on and lighting can be controlled with supported ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync motherboard software.


The XPG Lancer RGB DDR5-7200 kit weighs in at 72 grams on the scale. For Z-height, it comes in at 44 mm rounding up. At first, these seemed unnecessarily tall; however, closer inspection reveals a double purpose. The larger light diffuser mitigates the issue of being able to distinguish individual LEDs. XPG's approach to this common problem is a good solution, though at the cost of CPU cooler restrictions due to the increased DIMM height.


After taking the heat spreader off, we see that these are single-sided DIMMs with eight 2 GB ICs. This is as expected for a DDR5 32 GB kit since densities increased with DDR5. The thermal pad covers all the memory ICs. This particular kit does not have any coverage for the PMIC and surrounding components.


A closer look at the ICs shows that these are SK Hynix (H5CG48AGBD-X018). Currently, Micron, Samsung, and SK Hynix are the three suppliers of DDR5 ICs. When it comes to higher frequency memory, SK Hynix is currently unmatched and without a direct competitor. Micron's first DDR5 iteration, Rev.A only reached a mere 5600 MT/s, with the recently released Rev.G coming in at 6600 MT/s. Samsung has been mostly absent so far, with Samsung B-Die (DDR5) rarely seen in retail kits above 6400 MT/s. While both companies have more revisions in the works, SK Hynix's new A-Die memory is currently the only one breaking the 8000 MT/s retail barrier.

The kit we have here today uses SK Hynix A-Die. It will overclock the highest of all the current memory ICs offerings. New 3 GB ICs from Micron and SK Hynix are also available to consumers, but lag behind from looser primary timings and sub-timings due to the increase in capacity.


With DDR5, one of the major changes is how the motherboard directly provides 5 V to the memory module's PMIC, which is then stepped down and split accordingly. No longer is the motherboard responsible for regulating the voltages seen with DDR4. The PMIC has the part number "APW8502C." A quick search has APENC come up as the manufacturer.
Our Patreon Silver Supporters can read articles in single-page format.
Nov 22nd, 2026 17:16 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts