Monday, April 8th 2013

HighPoint Launches First 40-Port SATA 6 Gb/s HBA

HighPoint Technologies, Inc., a leading HBA and storage solutions manufacturer, announces the industry's first 40-Port SATA 6 Gb/s HBA - the Rocket 750. HighPoint is proud to introduce our innovative SATA Aggregation Technology to the storage marketplace - this revolutionary architecture allows a single host adapter card to support up to 40 SATA hard drives, and represents the industry's lowest-cost mass SATA storage solution.

The Rocket 750 is ideal for applications that require huge levels of storage capacity such as data Libraries, archiving and backup solutions, but need to maximize cost savings over SAS expander-based configurations. Powered by a PCIe 2.0 x8 host interface, 40 device channels, and HighPoint's Intelligent Storage Health Management Suite, the Rocket 750 is an ideal DAS solution for PC platforms and SMB server applications.
The Rocket 750's revolutionary HBA architecture removes the need for costly SAS expander devices and chassis backplane hardware, dramatically reducing up-front costs. The PCIe 2.0 x8 host interface and 6 Gb/s SATA controller hardware deliver the ideal transfer bandwidth for applications focused on maximizing available storage capacity.

Each device port supports up to four SATA hard drives: A single Rocket 750 is capable of supporting up to 40 4TB 6Gb/s SATA disks, for an unprecedented 160TB of directed-attached storage. The industry-standard SFF-8087 Mini-SAS connectors streamline installation, upgrade and maintenance procedures and ensure maximum compatibility with industry standard storage cabling, accessories & chassis hardware.

HighPoint has long recognized the value of unified management services. While other affordable mass storage solutions make do with the operating system's default utilities, or the disk manufacturer storage related monitoring software, Rocket 750 HBA's include HighPoint's comprehensive management suite known as Intelligent Storage Health Manager (ISHM). This intuitive web-based interface is available for all major PC operating system platforms, and includes a wide selection of storage related monitoring and notification services.

ISHM allows administrators to instantly check the status of all hosted storage devices, including available capacity, the condition of individual drives, and the health of the Rocket 750 HBA. The built-in SMART monitoring service provides real time data for each individual SATA hard drive, and actively records all warnings errors, and hardware related failures associated with each device to the central Event Log.

ISHM allows administrators to login remotely via an internet connection or local network, and configure Email notification and alert services to keep abreast of changing storage conditions while in the field.

HighPoint has developed a series of software suites that allow professional solution providers to quickly and easily integrate the Rocket 750 into all major PC operating system platforms including Windows 2012, 2008, 2007, and 8, Linux Distributions, and FreeBSD.

The Rocket 750 will be available in April 2013 from our worldwide network of retail and distribution partners.

MSRP: USD$ 739.00.
Add your own comment

10 Comments on HighPoint Launches First 40-Port SATA 6 Gb/s HBA

#1
natr0n
"Whoa Dude what are you doing ...?"

"Ah nothing much. Just plugging in 40 drives"
Posted on Reply
#2
Batou1986
I'm surprised pci2.0 8x doesn't bottleneck that but it is intended as a storage>speed solution.
Posted on Reply
#3
The Von Matrices
You better have good RAID or backup software on top of this. The mean time to failure on 40 drives has to be on the order of a few weeks.
Posted on Reply
#4
AsRock
TPU addict
The Von MatricesYou better have good RAID or backup software on top of this. The mean time to failure on 40 drives has to be on the order of a few weeks.
Use part of the 40 HDDs as back up :).

Crazy cool.
Posted on Reply
#5
blibba
Batou1986I'm surprised pci2.0 8x doesn't bottleneck that but it is intended as a storage>speed solution.
Well, it would take only 5.3 6Gb/s devices to saturate PCI-E 2.0 x8. That said, few HDDs manage a sustained transfer speed over 200MB/s, which would allow for 20 drives before the bus is saturated, ideal for a 40-drive RAID 10 array with such drives.
AsRockUse part of the 40 HDDs as back up :).

Crazy cool.
Yeah, nobody's going to use 40 drives in RAID 0 or JBOD for anything important.
Posted on Reply
#6
Frick
Fishfaced Nincompoop
blibbaWell, it would take only 5.3 6Gb/s devices to saturate PCI-E 2.0 x8. That said, few HDDs manage a sustained transfer speed over 200MB/s, which would allow for 20 drives before the bus is saturated, ideal for a 40-drive RAID 10 array with such drives.



Yeah, nobody's going to use 40 drives in RAID 0 or JBOD for anything important.
40 x quick SSD's in RAID 0 for maximum fail.
Posted on Reply
#7
blibba
Frick40 x quick SSD's in RAID 0 for maximum fail.
Well, in fairness, few if any SSDs manage 6Gb/s for small, random file reads or writes. So perhaps there would be a tiny, useless niche for such a setup there. Or perhaps not :D
Posted on Reply
#8
Prima.Vera
6Gb not 6GB ... ;)

6Gb/s is aprox 560MB/s with overhead and all...
Posted on Reply
#9
blibba
blibbaWell, in fairness, few if any SSDs manage 6GB/s for small, random file reads or writes. So perhaps there would be a tiny, useless niche for such a setup there. Or perhaps not :D
Prima.Vera6Gb not 6GB ... ;)

6Gb/s is aprox 560MB/s with overhead and all...
Yeah, just a typo, as you can tell by my first post in this thread, and the context of the second. I've edited the second now.
Posted on Reply
#10
Prima.Vera
blibbaYeah, just a typo, as you can tell by my first post in this thread, and the context of the second. I've edited the second now.
Yeah, the idea was, if I'm not mistaking , that using 8 SSDs will already be to much for the PCIe 2.0 x8 interface. For HDD only should be OK tho...
Posted on Reply
Apr 30th, 2024 16:14 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts