Wednesday, February 19th 2014

Gigabyte Also Rolls Out the J1900N-D3V Mini-ITX Motherboard

Gigabyte introduced one of the first mini-ITX motherboards based on Intel's new quad-core Celeron J1900 SoC, the J1900N-D3V. The chip integrates a quad-core x86-64 CPU clocked at 2.00 GHz. The SoC is passively cooled by a heatsink. It's wired to two DDR3 SO-DIMM slots, which can hold up to 8 GB of dual-channel DDR3-1333 MHz memory. A legacy PCI slot, along with a mini-PCIe 2.0 x1 slot, make up its expansion options. The board features quite a few legacy connectivity options, which make it an ideal choice for POS (point of sale) and kiosk PC builds.

The J1900N-D3V features two SATA 3 Gb/s ports as its storage connectivity. It draws power from a combination of 24-pin ATX and 4-pin CPU power connectors. Among its legacy connectivity options are an LPT parallel port (by header), two RS232 serial COM ports, PS/2 keyboard/mouse ports, and D-Sub display output. Among its more modern connectivity options are 6-channel HD audio, two gigabit Ethernet interfaces, four USB 3.0 SuperSpeed ports, and DVI digital display output. The best part? The board runs AMI UEFI BIOS, with Gigabyte's Dual-UEFI technology that protects against BIOS failures. The company didn't reveal pricing.
Add your own comment

8 Comments on Gigabyte Also Rolls Out the J1900N-D3V Mini-ITX Motherboard

#1
Assimilator
Not sure how many POS/kiosk PCs will need quad USB 3 or dual Ethernet, but still.
Posted on Reply
#2
TRWOV


I think I'll use one for my emulators box.
Posted on Reply
#4
aussiebear
by: TRWOV


I think I'll use one for my emulators box.
This solution is Bay Trail (Silvermont cores) based, right?

Wait for Cherry Trail (Airmont cores) based one. They're going to beef up the EUs on the IGP...End of 2014.
(It was to be in September, but it has been pushed back to November. Issues with 14nm process node?)
Posted on Reply
#5
Static~Charge
No HDMI output? :( This board would have potential in a HTPC with that.
Posted on Reply
#6
TheTechGuy1337
by: Static~Charge
No HDMI output? :( This board would have potential in a HTPC with that.
I completely agree with Static. If it had hdmi it would make a great HTPC. o_O
Posted on Reply
#7
BiggieShady
by: Static~Charge
No HDMI output? :( This board would have potential in a HTPC with that.
by: TheTechGuy1337
I completely agree with Static. If it had hdmi it would make a great HTPC. o_O
Yeah, beware or you will have to use these
Posted on Reply
#8
karlgeo
by: BiggieShady
Yeah, beware or you will have to use these

Posted on Reply