Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is excited to introduce a new All-in-one liquid cooler, the Thermaltake ARGB TH120/240/360 AIO. Besides the fancy ARGB fans that would draw people's attention, the quality of the product would also surprise the users with its affordable pricing. The glossy surface of the copper base plate guarantees high performance and impressive heat extraction. The top-quality pump, hidden in the glowing ARGB water block, ensures excellent coolant circulation that would keep the copper plate always cool.

The large surface radiator combined with the radiator fans dispatches heat in a highly efficient way. On the high-static pressure designed radiator fans are the 16.8 million color LEDs that are ready to sync with 5 V RGB capable motherboards from ASUS, Gigabyte, MSI, and ASRock, allowing users to show off their creativity. Users can also control the lighting effects of the fans through the Smart Fan Controllers that are attached to the ARGB TH120/240/360 AIO. Looking for an easy and cost-effective all-in-one solution to cool down the CPU? ARGB TH120/240/360 AIO.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, announces the TOUGHFAN 12 High Static Pressure Fan for ultimate precision and increases stability for users' high-end cooling needs. The TOUGHFAN incorporated a 2nd generation hydraulic bearing, ultra-tight tip clearance, and equipped with a reinforced-metal motor hub. The TOUGHFAN fan is a PWM controlled fan designed to perform at a maximum operating speed of up to 2000 RPM and is optimized for high static pressure while maintaining minimal noise.

Pure Duo 12/14 ARGB Radiator Fan comes in black and white color versions, is also a PWM controlled fan with two independent rings and nine addressable LEDs on each ring that allows users to switch among seven lighting modes. Moreover, Pure Duo can synchronize with 5 V RGB capable motherboards from ASUS, GIGABYTE, MSI, and ASRock, to display 16.8 Million color combinations by editing lighting software supported by those motherboards.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, happily presents the new Pacific PR32-D5 Plus Reservoir & Pump Combo, Pacific W7 Plus CPU Water Block, and Pacific MX1 Plus CPU Water Block.

The Pacific PR32-D5 Plus Reservoir & Pump Combo features a rotary inlet and outlet design that is easy for users to install. The 220 mm long reservoir with a 300ml capacity has twelve high lumen addressable LEDs that can display 16.8 million color RGB spectrum, enabled by the TT RGB Plus software. The high-performance D5 pump can create a high flow system that allows coolant to travel at a faster pace. The new mounting features also enables the Pacific PR32-D5 to be installed to a fan or a radiator so that the users can save more space.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, proudly presents the first-ever product that combines memory and an AIO liquid cooler, the Floe RC360 / RC240 CPU & Memory Liquid Cooler. Thermaltake never stops to seek out possibilities to impress our users with a more efficient cooling solution for our memory modules. With the new Floe RC360 / RC240 CPU & Memory Liquid Cooler, users can acquire an unparalleled gaming experience.

Floe RC360 / RC240 CPU & Memory Liquid Cooler is compatible with TOUGHRAM RC memory modules (Sold separately) and grants further expandability which allows users to equip a high-quality all-in-one cooling system, including a water block, radiator, an ARGB controller, and three high airflow 120 mm fans on the RC360 version and two high airflow 120 mm fans on the RC240 version. Other than that, Floe RC360/RC240 CPU & Memory Liquid Cooler can be synchronized with motherboards equipped with 5 V addressable RGB headers such as ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, Biostar VIVID LED DJ and ASRock Polychrome, allowing users to control the lights directly from the motherboards RGB lighting software.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, proudly announces our high capacity, high clock rate memory, the TOUGHRAM RGB 32 GB (2x16GB) and 64 GB (2x 32 GB), coming in both black and white versions. The TOUGHRAM RGB 32 GB comes in three clock rates, 3200 MHz, 3600 MHz, and 4000 MHz, and the TOUGHRAM RGB 64 GB comes in 3200 MHz and 3,600 MHz. For the best video editing qualities, Thermaltake now launches our high capacity memories to ensure that we meet the users' needs. To provide high stability PC performance, all ICs are tightly-screened and coated with a ten-layer PCB.

Uniquely designed TT premium heat spreader with ten high lumens individual addressable LEDs not only dispatches heat faster but lets users show off 16.8 million colors with countless lighting combinations. TOUGHRAM RGB 32 GB (2x 16 GB) and 64 GB (2x32GB) memories are compatible with Intel Z490 and AMD X570 chipsets and is now Intel XMP 2.0. ready. Furthermore, users can use NeonMaker or TT RGB Plus software to control the lighting effects. The TT RGB Plus software can also support other software such as TT AI Voice Control, Amazon Alexa, and Razer Chroma, to adjust the lighting. Upgrade to the TOUGHRAM RGB 32 GB (2x 16 GB) and 64 GB (2x 32 GB) for high-quality and high functioning stable memory.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is delighted to present our users a newly designed Core Series Chassis, the Core P8 Tempered Glass Full Tower Chassis. Constructed with three 4 mm tempered glass panels on the front, side, and top, the chassis allows users to showcase it as a regular transparent designed full tower chassis or an open frame chassis by simply removing the top and front panels. The Core P8 TG is also designed to display in two different ways, wall-mounted or vertical standing; users can have the option to present their chassis the way they like.

The Core P8 TG can hold up to eighteen 120 mm fans on the entire frame, or upgrade to twelve 140 mm fans if needed. The magnetic filters on the top, right, and bottom panels ensure excellent airflow while keeping the chassis clean in its closed frame structure. It also supports Pacific Core P5 DP-D5 Plus Distro-Plate with Pump Combo, which allows endless water-cooling possibilities. Specially designed, rotational PCI-E slots and the standard riser cable enable users to choose how they want to display their graphic cards. With its fully modular design and large interior spacing, the Core P8 TG Full Tower Chassis will be a great fit for users who are looking for a unique PC chassis.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is thrilled to announce an advanced PC case- the DistroCase 350P Mid-Tower Chassis. It is a fully modular designed chassis with a distro plate as the chassis' main body. The multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets, which provides users, gamers, and enthusiasts an easier way to design their water loops. The 48 LEDs on the DistroCase 350P Mid-Tower Chassis are TT RGB PLUS Ecosystem, ARGB motherboard software, and NeonMaker software compatible. PC builders can control the lights by synchronizing the case with motherboard brands including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. They can also enjoy TT AI Voice Control, Amazon Alexa Voice Service, and Razer Chroma by using Thermaltake patented TT RGB PLUS Ecosystem software for the ultimate user experience.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, proudly announced our high clock rate memory, the TOUGHRAM RGB DDR4 4600 MHz 16 GB Memory (2x8GB), which comes in both black and white versions. Besides the previous TOUGHRAM RGB 4000 MHz and TOUGHRAM RGB 4400 MHz Memory, we have now reached a new level, the TOUGHRAM line with a new higher clock rate of 4600 MHz in 16 GB (2x8GB) to ensure that we meet the users' needs. To provide high and stable gaming performance, all ICs are tightly-screened and coated with a ten-layer PCB.

Uniquely designed TT premium heat spreader with ten high lumens individual addressable LEDs not only dispatches heat faster but can allow users to show off 16.8 million colors with countless lighting combinations. Furthermore, users can use NeonMaker to customize and control the lighting effects, or even synchronized TOUGHRAM RGB DDR4 4600 MHz Memory with the TT RGB Plus software to maximize the control of RGB effects. TOUGHRAM RGB DDR4 4600 MHz Memory is also compatible with Intel Z490 and AMD X570 chipsets and supports Intel's XMP 2.0. If you're looking for high-quality, high functioning stable memory, choose TOUGHRAM RGB DDR4 4600 MHz.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is now announcing more excellent news for those who want to try out the NeonMaker software on other Thermaltake products. Besides Riing Quad, Riing Trio, and Floe DX series products, Thermaltake aims to expand the fun of NeonMaker to other product lines; hence, NeonMaker software now supports the TOUGHRAM RGB Series!

If users want to pair up their TOUGHRAM RGB Series lighting with cooling products, now is the time to do so. Users are able to personalize their lighting effects freely by utilizing the NeonMaker software, and users can also find out more information on the TOUGHRAM RGB Series products through AR technology by using our exclusive ARTT app. Other than that, users can also synchronize TOUGHRAM RGB Series products with the TT RGB Plus software to maximize the control of RGB effects.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is excited to introduce a new all-in-one liquid cooler, the Thermaltake TH120/TH240 ARGB AIO. This high-quality AIO features stunning ARGB fans set at an affordable price point, giving consumers more value for their money. The glossy surface of the copper base plate guarantees high performance and impressive heat extraction.

The top-quality pump, hidden in the glowing ARGB water block, ensures excellent coolant circulation that would keep the copper plate always cool. The large surface radiator combined with the radiator fans dispatches heat in a highly efficient way. On the high-static pressure designed radiator fans are the 16.8 million color LEDs that are ready to sync with 5 V RGB capable motherboards from ASUS, Gigabyte, MSI, and ASRock, allowing users to show off their creativity. Users can also control the lighting effects of the fans through the Smart Fan Controllers that are attached to the TH120/TH240 ARGB AIO. Looking for an easy and cost-effective all-in-one solution to cool down the CPU? The TH120 and TH240 ARGB.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is now bringing some fantastic news for those who have been dying to try out the NeonMaker software without a set of Riing Quad Fans. The NeonMaker software now supports Riing Trio and the Floe DX series coolers. Now is the best chance for users to try out the NeonMaker with different Thermaltake products. Not only will you be able to personalize your lighting effects freely by utilizing the NeonMaker software, but you can also synchronize with the TT RGB Plus software to maximize the control of your RGB effects.

NeonMaker not only provides various default effects, but also lets users customize lighting colors, adjust effects' via the timeline, and lighting directions using the software editor. It also allows users to personalize their lighting effects on each LED, granting access to further customizable lighting options. There's no need to wait, enjoy all RGB related features on the NeonMaker software by using Riing Trio Fans and Floe DX series products.

Thermaltake today announced its TOUGHRAM Z-ONE series premium PC memory without RGB LED embellishments. The TOUGHRAM Z-ONE series, which debuted in December 2019, originally feature an RGB LED diffuser on top. The new modules instead feature a brushed aluminium crown of a contrasting shade to the heatspreaders, which gives it an Art Deco look when viewed from the top. The company launched two SKUs today, "R010D408GX2-3600C18A" is a 16 GB dual-channel (2x 8 GB) kit rated for DDR4-3600, while "R010D408GX2-3200C16A" is its DDR4-3200 rated sibling. The 3600 MHz variant achieves its marketed speeds with a tested CAS latency of 18T, and 1.35 V vDIMM. The DDR4-3200 variant does so at 16T CAS latency, and 1.35 V. Both variants pack Intel XMP profiles to enable advertised speeds, and are tested to work on Intel X299, Z390, and AMD X570 platforms. The company didn't reveal pricing.

Thermaltake today introduced the Pacific TF2 temperature and flow-indicator (model: CL-W275-CU00SW-A), a useful accessory for complex water-cooling setups. You simply fit it across a coolant channel, and plug it into a USB 2.0 header. Additional power is drawn via a SATA power connection. An LED segment display gives you a live readout of the coolant temperature and rate of flow. It includes an audible and visual alarm. You can set warning thresholds for both, so you can quickly figure out if your setup has coolant leaks or is overheating. That's not all, the device even interfaces with TT RGB Plus software over the USB connection, and relay its sensor data to software. The company didn't reveal pricing.

Thermaltake today released to market the Riing Quad line of fans optimized for liquid-cooling radiator applications (high static pressure). The Riing Quad series was announced at this year's CES. The 120 mm triple-pack is priced at $177.72, and the 140 mm triple-pack at $160. Available in 120 mm and 140 mm sizes, these fans are characterized by four independent ARGB LED lighting zones (rings) adding up to a staggering 54 diodes per fan. The impeller hub has two of these zones, one at the outer hub cap and one along the periphery of the hub); while the frame has the other two zones, one along the bore of the frame, and the other along its periphery, pointing outward.

Besides this, the fans offer 40,000-hour hydraulic bearings, 9-blade impellers designed for high static pressure, and rubberized frame-mounts. The 140 mm variant spins between 500 to 1,400 RPM, pushing up to 60.17 CFM of air, at up to 26.1 dBA of noise. The 120 mm variant does 500 to 1,500 RPM, pushing up to 40.9 CFM of air, at up to 25 dBA of noise. Each of the fans in the pack takes in a 9-pin USB header connection to an included controller module. A single cable provides both power for the main function, and software control over speeds and lighting. The controller module is essentially a powered USB 2.0 hub that interfaces with one of your motherboard's USB 2.0 headers, and takes in additional power through a SATA power input. Thermaltake's TT RGB Plus app handles things on the software side.

Thermaltake today rolled out the TH240 ARGB Sync and TH120 ARGB Sync all-in-one, closed-loop, liquid CPU coolers. As their names suggest, the two are differentiated by radiator size, with the TH240 (CL-W286-PL12SW-A) packing a 240 mm x 120 mm radiator; and the TH120 (CL-W285-PL12SW-A) a 120 mm x 120 mm one. What's different with these coolers is the inclusion of high static-pressure fans, an included fan+LED controller, and a cubical new pump-block design with an ARGB LED illuminated ornament on top. The pump turns at a fixed 3,300 RPM speed, while each of the included fans takes in 4-pin PWM + 3-pin ARGB connectors, spinning up to 1,500 RPM, pushing 59.28 CFM of air, with a maximum noise output of 28.2 dBA. Among the CPU socket types supported are LGA115x and AM4. The company didn't reveal pricing.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, solemnly presents a budget-friendly chassis, the V250 TG ARGB Mid Tower Chassis. Providing all the essential functions and bringing more to the table, the V250 TG is designed with a sleek acrylic front panel, and one 4 mm tempered glass side panel that ensures the best visual aesthetics. Glowing through the front panel are the three preinstalled 12 mm ARGB fans, which pairs with one preinstalled 120 mm standard rear fan. With the good base feet design, users can rest assured that the chassis' has exceptional ventilation abilities.

The PSU shroud aids in tidying unsightly cables, and multiple dust filtration prevents the chassis from getting dirty; regardless, both grant additional help in serving to create the best airflow throughout the chassis. Even with its compacted size, the V250 TG ARGB Mid Tower Chassis is still able to support a standard ATX motherboard and is designed to support high-end expansions to suit every user's individual needs. So, are you on a budget but still want to build a cool computer while sitting at home? Thermaltake's V250 TG ARGB Mid Tower Chassis will help achieve your goal.

Thermaltake today released the S100 Tempered Glass line of Micro-ATX tower cases. Available in all-black and white+black "Snow Edition" variants, the S100 is characterized by a matte finish front, a 4 mm-thick tempered glass side panel, and a horizontally partitioned interior layout similar to conventional ATX mid-towers. The upper compartment offers room for Micro-ATX (or smaller) motherboard form-factors, and room for graphics cards up to 33 cm in length, and CPU coolers up to 16.5 cm in height.

Storage options include two 3.5-inch trays that can each hold 2.5-inch drives, and two additional 2.5-inch mounts behind the motherboard tray. The bottom compartment has room for standard PSUs up to 16 cm in length. Ventilation includes two 140/120 mm front intakes, a top exhaust that holds either a single 200 mm or two 140/120 mm fans, and a 120 mm rear exhaust. You can mount radiators up to 280 mm x 140 mm along the front- and top panels. Front panel connectivity includes a USB 3.0 port, and a couple of USB 2.0 ports. The case measures 411 mm x 220 mm x 441 mm (HxWxD). The company didn't reveal pricing.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, the Smart Power Management 2.0. To improve our user's experience, Thermaltake has redesigned the entire interface allowing users to track and record their power usages. SPM platform helps monitor the digital power supply unit's lifespan and prevents data loss due to malfunctions being undetected. The brand-new dashboard contains overall power supply data for users to obtain information in one glance. Independent Power Supply Unit analysis page allows users to select individual power supply to access detailed information.

Users can add, remove, or rename the power linked to the platform on the Power Management page. To pick up abnormal events effortlessly, users can go to the Cloud notification page to analyze power supply activity notes. Moreover, to promote the eco-friendly concept to our product, Thermaltake's ECO Achievement page helps raise the users' awareness of how much carbon dioxide they produce while using the power supply. By utilizing Thermaltake's Smart Power Management 2.0, users can easily monitor and control their digital power supply.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, Thermaltake proudly announced a new member of Level 20 series, the Level 20 RS ARGB edition mid-tower chassis. Inspired by sports cars, the Level 20 RS ARGB has a rising top panel that cleverly hides the I/O ports on its side; the ARGB light bar shown on its front perfectly mimics the afterimage of a car's tail light. Furthermore, we switched the front panel's material to a three-layer filter, and adjusted the pillars of the front panel to help maximize the airflow, giving a unique characteristic to this chassis.

Softly shining through the front panel is the two 200 mm ARGB preinstalled fan, with one 120 mm fan at the rear end creating perfect ventilation. Two tempered glass side panels and an acrylic tempered window on the PSU cover provides excessive visual accessibility for showing off your power supply; rotational PCI-E slots and removable PSU cover allow users to install their PC's effortlessly and to arrange their parts as they wish. By utilizing Thermaltake components, users can experience the best liquid cooling expansions and advanced cable management. Get ready for your race by choosing the new Level 20 RS ARGB.

At the 2020 International CES, Thermaltake unveiled a plethora of new gaming peripherals that include keyboards, mice, surfaces, and headsets. The star attractions here were the TK5 RGB keyboard and mouse. The keyboard has a dual-tone face-plate design that looks refreshingly new. You get a detachable cushioned palm-rest. The face-plate around the main key cluster and function keys are silvery aluminium, while one surrounding the numerical cluster, arrow and editing keys is contrasting dark aluminium. The TK5 uses a floating keycap design, with RGB LED element of each individual key producing a glow around the key. There's an acrylic RGB LED diffuser that runs along the periphery of the keyboard, too. Thermaltake is using Cherry MX Blue or MX Speed Silver switches.

The TM5 mouse is wireless, but can also be used as a wired mouse. As a wireless mouse, it supports 2.4 GHz RF (needs a dongle, but provides 10 m range and lower latency) and Bluetooth 5.0 (no dongle needed). The mouse features a palm-grip optimized ambidextrous design with 8 buttons in total. RGB LED embellishments include the scroll-wheel and an RGB element that runs along the periphery of the underside of the mouse. Under the hood is a 16,000 dpi PixArt PMW3335 sensor and Omron-made switches.

Thermaltake aspires to be a major enthusiast-segment PC memory vendor, and brought several new models of its ToughRAM RGB memory modules to the 2020 International CES. These modules are characterized by chunky aluminium heatspreaders, and an RGB LED diffuser crowning the modules. There are also some chrome accents that make to the distinct "TT" company logo. There's also the standard ToughRAM that replaces the RGB diffuser with a block of silvery aluminium. At CES we spotted new high-frequency variants, with the ToughRAM series now spanning DDR4-4400, DDR4-4266, DDR4-4000, DDR4-3600, and DDR4-3200 in standard ToughRAM and its RGB variants.

The ToughRAM RGB White Edition comes in DDR4-4400, DDR4-4266, and DDR4-4000 speeds, and in 8 GB module densities making up 16 GB dual-channel kits. Common to both lines are high-bin DRAM chips, 10-layer PCBs with 2 oz copper layers, 10 µ-thick gold electroplated contacts, and the ToughRAM software application that provides temperature, frequency, and timing monitoring; alongside the TT RGB Plus software that lets you play with colors on the ToughRAM RGB models. We also spotted the liquid-cooled WaterRAM from last year.

Thermaltake, the leading premium brand of DIY PC components for Cooling, Gaming Gear and Enthusiast Memory solutions has announced Riing Quad 12 RGB Radiator Fan and Riing Quad 14 RGB Radiator Fan, the world's first 16.8 million 4-ring design radiator fan with 54 addressable RGB LEDs. Supports NeonMaker Light Editing Software and TT RGB PLUS Software, up to 20 of Riing Quad RGB Radiator Fan can be controlled at the same time.

The Riing Quad works with Amazon Alexa and can Sync with Razer Chroma Lighting as well as Thermaltake AI Voice Control. With a 9-Blade High-Airflow design, the Riing Quad utilizes 120 mm and 140 mm high-static pressure blade design, long-life hydraulic bearing and a PWM controlled motor to deliver remarkable acoustic and cooling performance to elevate the aesthetics of custom PC build.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions, today announced the release of the Floe RC360 / RC240 ARGB all in one liquid CPU & RAM cooler kit, the first in the industry to combine RAM with AIO liquid cooling, which is compatible with Thermaltake memory modules (Sold separately). Thermaltake took a leap on exploring more possibilities for providing a powerful cooling solution for memory modules.

Floe RC360 / RC240 ARGB all in one liquid CPU & RAM cooler kit allows users to maximize their overclocking performance, granting users the ability to equip a high-quality all-in-one cooling system including a water block, radiator, an ARGB controller, 3 airflow 120 mm fans on the RC360 version and 2 airflow 120 mm fans on the RC240 version. This provides the user with superior cooling performance, longer lifespan and stability.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is excited to announce the launch of View 51 TG ARGB mid-tower and AH T600 TG open frame gaming chassis and will be showcased in Thermaltake booth in CES 2020. View 51 and AH T600 reflect the determination from Thermaltake to create a broader range of enthusiastic gaming cases which are based on gamers, modders and enthusiasts' demands. View 51 is designed to fulfill gamers who love hardcore water-cooling while AH T600 makes a bold statement as open frame chassis concept utilizing a leading-edge aesthetic and powerful air-cooling design.

View 51 that tailor-made for advance water cooling and features two 200 mm ARGB PWM fan at the front of the case and one 120 mm ARGB fan at the rear as a standard option. The case is wrapped in three sheets of 4 mm tempered glass panels for a transparent view into the front, side and top. Combined with support for quad 360 mm radiators at the top, front, side and bottom of the case, the smoked tempered glass and RGB fans contrast perfectly against the View 51's DUAL-CHAMBER design available in either black or white.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is thrilled to present a new member to the S Series family - the S300 Tempered Glass Mid Tower Chassis which comes in simple black and elegant white. Inherits the same luxurious touch from the S series, S300 TG's sleek exterior has a minimalistic design; with the metallic surface and the high-quality 4 mm tempered glass side panel, it can be both simple and playful. Top-front I/O ports placement provides sufficient practicability and a preinstalled 120 mm rear fan for competent ventilation.

Magnetic removable filters on the top, right, and bottom not only offer extra airflow but excellent protection against dirt or dust. Our well-designed interior spacing, rotational PCI-E slots, and removable PSU cover allow users to install hardware effortlessly and arrange the components as you wish. S300 TG also serves outstanding liquid cooling expansions and advanced cable management with affordable pricing. If you are looking for a fashionable, contemporary designed chassis, but still hoping to display the components, S300 TG will be the premium option to go.