Introduction

I would like to thank Dimastech for providing the review sample.

We have reviewed the Benchtable Easy V2 almost a year ago and here we are again with the company's newest version of the open chassis format. The Benchtable Easy V2.5 takes the proven layout and shape of the v2 and improves on many different aspects. While they look similar, there are numerous differences, which we will explore in this review. For all of those not familiar with the Benchtable Easy V2, I suggest you read through the review here.

Features & Specifications

• Bench made from sheet metal 1,5 mm
• CNC laser cutting
• Powder or Enamel, basic phosphatic
• Totally "Made in Italy"
• Marked "Made in Italy" on the back of the Bench/Test Table
• Compatible with ATX and Full ATX motherboard and Micro ATX, XL-ATX, Mini ATX
• Installation of up to 3 devices 5.25 inches
• Installation of up to 3 hard drives (3.5 inch) 4 or more floppy disks with no floppy drive,
• Support for sockets with fan ventilation area 120x120
• Support for ventilation area opposite 120x120 video card fan
• Latest keys wired for power and reset switches, (n ° 2)
• Holes on the front and back of the motherboard to allow the passage of cables and pipes for watercooling downstairs
• PSU supports positioned on the front or back of the Bench/Test Table
• Compatibility with power supplies up to 22cm in length
• Lateral support for the installation of all types of radiators on the market (HwLab, Thermochill, TFC, Etc)
• Rear space for installation of a compact liquid cooling system
• Thumb Screws step M3 and 6-32 (American pitch UNC)
• Support for 120x120 mm fan for cooling systems in SLI/Crossfire
• Rubber feet * Ram fan support 120x120 mm
• Lower drawer with sliding tracks and fixation with screws knurled side
• Placement supported devices on slots
• Personalization side of the body with the basic version of the Bench/Test Table
• Adjustable positioning device support
• Supports for adjustable radiator over the back of the Bench/Test Table
• Screws also knurled nuts
• Total elimination of the use of instrumentation outside the Bench/Test Table

Packaging

Dimastech ships the new Benchtables V2.5 in a similar sized package as the V2. The first new addition is the large company logo on the box along with a little written note about what color and type of Benchtable is inside. I was rather frustrated with the form of packaging on the previous table and Dimastech has taken it upon themselves to improve in that area as well. Gone is the load of Styrofoam pebbles, replaced by carefully cut Styrofoam parts. This is a huge step in the right direction and reduces clutter as well as eliminating the charged particles clinging to the benchtable. It only leaves you with a few large blocks of the stuff - very manageable. I would go as far as to say that the interior block, holding all the small pieces of the table is an excellent idea. Now if they could switch from Styrofoam to actual foam, I am sold. Another issue I had - which is still present - are the badly sealed bags of screws. I received two benchtables and I had to go fishing for screws in both packages, as the bags have burst open during transit. It should be mentioned, that there are a lot of screws included.

Contents

There seems to be a large bag of screws, with a seal in-between, to form two compartments. This is the weak point of this contraption prone to ripping open during transit. The amount you get are more than enough and you will be left with plenty of thumb screws to use for other projects, unless you fill the Benchtable completely.


With the new tables come new optional accessories. This means that the following parts are available to buy separately. There is a flexible fan mount - called FlexFan120 - which you may use to direct a fan anywhere around the table, to cool specific parts. The second is the addition of a USB 2.0 plug which can be mounted directly on the frame of the Benchtable and routed to one of the internal ports on the mainboard. It looks exactly like one of those found on the mainboard brackets. Depending what this port goes for, you may be better off digging through your hardware stash and using one supplied with a board instead. That said, an eSATA port has the exact same dimension as far as the mounting screws are concerned, so you can go ahead and use such a part as well.