Friday, December 9th 2011
4 TB Hitachi Desktop Hard Drive Starts Selling in Japan
While the hard drive industry as a whole continues to be affected by the Thailand floods, Hitachi Global Storage Technologies (GST) is ending 2011 on a high note by starting shipments of its first 4 TB 3.5-inch HDD. Codenamed HDS5C4040ALE630 and likely part of the Deskstar 5K (we're guessing 5K4000) series, the 4TB drive has yet to be announced by Hitachi but it can be found on sale in Japan, priced at 26,800 yen (~ US $ 345 / 259 Euro).
Hitachi's 4 TB hard drive has 32 MB of buffer memory, a SATA 6.0 Gbps interface and makes use of the CoolSpin technology, which means its (likely four) platters operate at around 5900 RPM. No word yet on a 7200 RPM version but it's probably in the cards for 2012.
Source:
Akiba PC Watch
Hitachi's 4 TB hard drive has 32 MB of buffer memory, a SATA 6.0 Gbps interface and makes use of the CoolSpin technology, which means its (likely four) platters operate at around 5900 RPM. No word yet on a 7200 RPM version but it's probably in the cards for 2012.




50 Comments on 4 TB Hitachi Desktop Hard Drive Starts Selling in Japan
I think my first drive was a 210MB Conner IIRC on a pretty fast 386/25Mhz. So in 20 years we have gone from 300*MB to 3TB. And that is 10000x. Yes. 10,000x
* Rotten typos in my original post.
I remember the good old days with my 80MB hard drive and Wing Commander taking up 10MB of that (with speech pack/addons)
setup up this job:
[One Way Sync]
1 Drive(Media) ---> 1 Drive(Backup)
done.
Did a little digging and as a matter of fact:
"Kryder noted that hard-drive areal densities have matched the famed Moore's Law, first outlined in 1965" ...Would provide link, but it's busted.
since you used bytes it's actually 104857.6 times larger
30MB = 31457280 bytes
3TB = 3298534883328 bytes
thinking about that rate of increase by 2030 our current hard drives will seem as small as 30MB does now.
Anyway, the way i see it, the bigger the hard drives seem to get these days, the higher the fail rate of them. Especially in the SATA III market.
*runs*
I'm not good at math. Nor an engineering. But I'm good at speaking Swiss German and eating Chocolate!
Without it, probably wouldn't do more than 4 of these drives in an array. At least not with the initial run of 4TB drives.
Since we're reminiscing, my first was a 730MB Western Digital.
RAID6 on software? Bleee.... Furthermore anyone who running hardware RAID will say the same thing. You need at least 8 HDDs to maximize efficiency of the RAID 6 array. RAID 6 on 4 disks is pointless.To some extent very true. To some extent because in home applications nobody is backing up hard drives every day. Nobody is buying Streamers or Tape Libraries. For a 2-3 drive system RAID 1 is better backup than no backup. Truly appalling statements are from users (on various forums or in real life) which creating (e.g.) 4x1TB drive RAID0 as a backup. :banghead: They should have PC confiscated at once.
losing 500GB/1TB of data especially when it contains irreplaceable data makes for a minor depression so I havent used RAID since the last failure
syncing 2 drives has been working beautifully for me for years now. if I am to ever try it again it will be 2TBs in RAID0 synced to one 4TB drive for backup
The thing is, too many people treat RAID as a method of backing up and cry when logical data destruction happens.
Anyway, agreed, RAID is more a form of security than a backup.
my post was in response on where to backup data, not what a backup is.
so he asked where would you backup 4TB of data other than a 4TB drive? My response was raid. 3 2TB in raid 5, etc.
backup indicates software, raid is a hardware redundancy. This is a hardware thread. your backup comment isn't relevant or on topic.