Wednesday, March 23rd 2016

SilentiumPC Announces the Regnum RG1 Pure Black Chassis

SilentiumPC announced the Regnum RG1 Pure Black chassis. With the new Regnum RG1 saving money on a case has never been easier. It's the first value-oriented chassis with dual-chamber internal layout which dramatically improves both airflow and cable management. Added advantage is how clean and seamless the complete PC system looks with very little effort.

RG1's incredibly roomy interior allows for very flexible choice of components as its compatible with ATX motherboards, long power supplies, graphics cards up to 380mm and CPU coolers up to 160mm. Also offers two external 5.25" drive bays as well as two 3.5 and two 2.5" internal drive bays for desired HDD/SDD configurations. The chassis comes equipped with a single quiet 120mm fan and all intake holes covered with dust-filters. Should additional airflow is required up to six 120mm fans in total can be installed. Regnum RG1 is also compatible with both single and dual radiator all-in-one watercooling solutions.
In terms of exterior design we opted for classy, timeless looks with minimalistic, brushed front panel with a discreetly placed SilentiumPC logo. All the ports are located at the top of the panel including power and reset buttons, mic and headphone jacks as well as two USB 3.0 ports.

RG1 is a dream come true for value-oriented buyers as it combines the praised features and high-quality at an entry-level price point.

Highlights:
  • Dual-chamber internal layout for improved airflow and cable management
  • Understated exterior design with brushed front panel
  • Rear-mounted 120mm fan for quiet cooling, support up to six 120mm fans in total
  • 2 x USB 3.0 at the top panel
Tech specs:
  • Dimensions: 430(H) x 447(L) x 208(W)mm
  • Motherboard support: mATX / ATX
  • PSU: ATX standard (not included)
  • Expansion slots: 7
  • Net weight: 4.4 kg
  • Drive bays:
    o External: 2 x 5.25"
    o Internal: 2 x 2.5" + 2 x 3.5"
  • Maximum VGA card length: 380mm
  • Maximum CPU cooler height: 160mm
  • Cooling system (up to six fans in total, one included):
    o Front: 3 x 120mm fan (optional; top one replaces 5.25" drive bays)
    o Rear: 1 x 120mm fan (1x included 120mm fan @ 1100 rpm)
    o Chamber separator: 2 x 120mm (optional)
  • Front panel interface:
    o 2 x USB 3.0
    o 1 x Headphone jack (HD audio)
    o 1 x Microphone jack (HD audio)
MSRP: US $27.50 (excl. taxes).
Add your own comment

12 Comments on SilentiumPC Announces the Regnum RG1 Pure Black Chassis

#1
P4-630
No window:( Ok it's cheap but I would not buy it.:p
Posted on Reply
#2
Primey_
Looks great for $27.50. What's the catch?
Posted on Reply
#3
Frick
Fishfaced Nincompoop
Primey_Looks great for $27.50. What's the catch?
Metal so thin you can cut yourself, flimsy construction, terrible bundled fans. And more I assume. But for the price though ... looks pretty great.
Posted on Reply
#4
PLAfiller
$ 27.50....wow...in EU-27 will probably be 27,50 EUR , which is still insanely impressive. I was having my eye on Zalman ZM-T5 for this kind of cash, but hey I might re-think.
Posted on Reply
#5
romeg
Great price for a nice looking case. I'm with everyone who wonders about quality, but if it's not messed with except for cleaning, it might hold up for a couple of years. I actually could have used it six months ago when I built my NAS.
Posted on Reply
#6
Arrakis9
for the price this is actually a quite handsome case. the front bezel reminds me of older IBM workstation cases
Posted on Reply
#7
PP Mguire
My Pro M case is only 1.9" taller than this yet mine can fit full sized boards.....why is this odd.
Posted on Reply
#8
peche
Thermaltake fanboy
Primey_Looks great for $27.50. What's the catch?
there is no catch .. also there is no even window...
P4-630No window:( Ok it's cheap but I would not buy it.:p
doit your self... .
Arrakis+9for the price this is actually a quite handsome case. the front bezel reminds me of older IBM workstation cases
agreed .. looks more a workstation than a gaming or enthusiast PC...!
:toast:

Regards,
Posted on Reply
#10
Hiryougan
FrickMetal so thin you can cut yourself, flimsy construction, terrible bundled fans. And more I assume. But for the price though ... looks pretty great.
Actually no. SPC cases are the best bang4buck options available. Check their other cases, TPU did some reviews.

The catch is the availability. It will be hard to get outside of Poland. The base price is in PLN and it was calculated to dollars from this currency. For example two years ago it would cost a few bucks more because dollar was a lot cheaper.
Their cases are actually quite sturdy, you would be surprised. Thanks to the "carvings" on side panels they are solid.
The only competition for this case is the other SPC product, Gladius M20. You can check the reviews online, but it's hard to find in different languages than polish.

Also if the price sounds "too cheap" for you, check the review of their Grandis cooler or Aquarius X90 case(i have it actually), here on TPU.

Also they have quite a few cases that seem to have the same oem as BitFenix, except they are cheaper.
Posted on Reply
#11
thebluebumblebee
The third picture tells me all I need to know about this case. The motherboard jammed up against the top of the case. The cheap expansion slot covers. The lack of room under the motherboard, with only a bulge in the side panel for room.
It's a CHEAP, poorly engineered case. You can get a much better case for only a little more money, and it will be so worth it.
Posted on Reply
#12
Hiryougan
thebluebumblebeeThe third picture tells me all I need to know about this case. The motherboard jammed up against the top of the case. The cheap expansion slot covers. The lack of room under the motherboard, with only a bulge in the side panel for room.
It's a CHEAP, poorly engineered case. You can get a much better case for only a little more money, and it will be so worth it.
What are you talking about? It isn't jammed. Check the videos of it:
It's by no means an ideal case, but holy shit man, it's 27$. It's a budget case, they don't have to be perfect. There is no better case in the ~30-35$ price point anyway. You would have to give at least 10$ to get something better.
Posted on Reply
Add your own comment
Apr 20th, 2024 01:53 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts