Thursday, October 15th 2020

EK Water Blocks Releases Vector Water Block for EVGA RTX 3080 and RTX 3090 XC3

EK, the leading computer cooling solutions provider, is launching its premium high-performance GPU water block for the EVGA XC3 edition of NVIDIA GeForce RTX 30 Series graphics cards. The new water block is named EK-Quantum Vector XC3 RTX 3080/3090 D-RGB and is exclusively engineered for the EVGA XC3 RTX 3080 and RTX 3090 GPUs. The EK-Quantum Vector XC3 RTX 3080/3090 water block is compatible with EVGA XC3 RTX 3080 and 3090 graphics cards. This Vector water block actively cools the GPU, top-facing VRAM, and inductors and MOSFETs in the VRM section.

These newly developed XC3 water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. An Open Split-Flow cooling engine design is implemented, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation, unlike some products that are currently available on the market.
Fin array is populated by 27 microfins with 0.5 mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards.

The base of the water block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined either out of glass-like cast Acrylic or durable black POM acetal. The 2nd generation Vector GPU water blocks also feature plexi and acetal terminals that match the top cover material. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB Lighting on the EK-Quantum Vector XC3 RTX 3080/3090 D-RGB
The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 12 individually addressable RGB LEDs on the Acetal and 5 on the Plexi version. It is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

Backplate for the XC3 RTX 3080/3090 Water Block
EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core, backside VRAM on the 3090 cards, and backside of the printed circuit board VRM section.

Availability and Pricing
The EK-Quantum Vector XC3 RTX 3080/3090 full-cover water blocks and backplates are made and assembled in Slovenia, Europe, and are available for pre-order through the EK Webshop and dedicated reseller network. The water blocks and backplates are expected to ship out early-November, or possibly even sooner. In the table below, you can see the manufacturer suggested retail price (MSRP).
Add your own comment

Comments on EK Water Blocks Releases Vector Water Block for EVGA RTX 3080 and RTX 3090 XC3

There are no comments yet.