Friday, August 22nd 2025

Minisforum Shows Off Strix Halo Desktop with 80 Gbps USB4 V2 Ports

The new Minisforum MS-S1 Max AI desktop is a mini-tower desktop powered by a mobile-on-desktop (MoDT) mainboard featuring an AMD Ryzen AI Max+ 395 "Strix Halo" processor. Perhaps the most interesting feature about the product flyer is the desktop's implementation of 80 Gbps USB4 V2 ports, which is probably the industry's first, at least in the client segment. The USB4 specification was originally drafted in 2019 for three bandwidth tiers—20 Gbps, 40 Gbps, and 80 Gbps, the latter coming out with the 2022 standardization of USB4 v2.0.

USB4 v2.0 isn't just PCIe Gen 4 physical with a USB link layer, but implements a new PAM3 coding scheme over an existing pin-count, and is designed to be compatible with "passive" 40 Gbps-capable USB4 cables for a fixed 80 Gbps per-direction bandwidth. The standard also proposes a new active cable design that enables asymmetric bandwidth distribution between the Tx and Rx lanes, allowing the host and guest to have 120 Gbps of bandwidth in one direction, and 40 Gbps in the other, which could prove useful in certain scenarios such as heavy data transfers from portable SSDs or eGPU enclosures. Sounds familiar? That's because this is exactly what Thunderbolt 5 offers with its Bandwidth Boost feature Intel innovated. These aside, the MS-S1 max is a fairly straightforward MoDT implementation of the "Strix Halo."
Source: HXL (Twitter)
Add your own comment

11 Comments on Minisforum Shows Off Strix Halo Desktop with 80 Gbps USB4 V2 Ports

#1
TheinsanegamerN
That's actually a good looking desktop. Very similar to HP's strix halo design.

Have Minisforum PCs improved in reliability lately? I seem to remember their mini PCs kinda being a crapshoot on if they worked right after a year or so.
Posted on Reply
#2
Zendou
TheinsanegamerNThat's actually a good looking desktop. Very similar to HP's strix halo design.

Have Minisforum PCs improved in reliability lately? I seem to remember their mini PCs kinda being a crapshoot on if they worked right after a year or so.
I have had similar experiences with their equipment (HN2673). The reason I returned the device was it had a low TJmax set by minisforum for the CPU of around 75-80 degrees celsius so it would throttle all the time. Probably better off purchasing the Framework version of this device. I believe it can be currently pre-ordered.
Posted on Reply
#3
AsRock
TPU addict
Hate to see the price tag, i guess for those who are really tight on space but other wise really not worth the extra cost.
Posted on Reply
#4
Mack4285
ZendouI have had similar experiences with their equipment (HN2673). The reason I returned the device was it had a low TJmax set by minisforum for the CPU of around 75-80 degrees celsius so it would throttle all the time. Probably better off purchasing the Framework version of this device. I believe it can be currently pre-ordered.
Framework's version uses a real mini-itx board, which is good. However, it's on perpetual pre-order. While orders are being delivered, they apparently don't catch up on demand, so deliveries are slipping into 2026 soon. Which is a joke, when they introduced the pre-order in February or so... Who waits 6+ months for hardware?
Posted on Reply
#5
HeadRusch1
AsRockHate to see the price tag, i guess for those who are really tight on space but other wise really not worth the extra cost.
It'll be great to watch this get demoed on the various YouTube MiniPC influencer channels..............and then they will get to the price, we'll all chuckle and nod and immediately forget it exists. "I'll get one used...in 2030...for $600..." etc.
Posted on Reply
#6
dailing007
Finally, the first mini host equipped with USB4V2 has arrived
Posted on Reply
#7
A&P211
HeadRusch1It'll be great to watch this get demoed on the various YouTube MiniPC influencer channels..............and then they will get to the price, we'll all chuckle and nod and immediately forget it exists. "I'll get one used...in 2030...for $600..." etc.
Those mini PC youtube channels never say the cost of the PCs, its always in the link below.
Posted on Reply
#8
SL2
Mack4285Framework's version uses a real mini-itx board, which is good. However, it's on perpetual pre-order. While orders are being delivered, they apparently don't catch up on demand, so deliveries are slipping into 2026 soon. Which is a joke, when they introduced the pre-order in February or so... Who waits 6+ months for hardware?
And people STILL believe Intel bribes Dell, etc.

They don't have to.
<I said, Intel don't have to. It's entirely possible that they do lol>
AMD can't/won't meet APU demand, because EPYC comes first (because $), hence not everyone can get enough APU's so they go for Intel instead.
Posted on Reply
#9
Cheeseball
Not a Potato
Although USB-IF has not finalized the specification for USB4v2 yet, I believe its just based off Thunderbolt 5.

So depending on the USB4v2 chipsets that come out soon, they would be limited to PCI-E 4.0 x4 (63Gbps) tunneling. Currently its only JHL9580 that supports this.
Posted on Reply
#10
Aaron2
I bought a Minisforum UM350 for HTPC use and it's rubbish, I wish I never bought it. It's probably the AMD fTPM bug that made videos start to stutter at random points and they never provided a bios update to fix it.
Posted on Reply
#11
SL2
Aaron2I bought a Minisforum UM350 for HTPC use and it's rubbish, I wish I never bought it. It's probably the AMD fTPM bug that made videos start to stutter at random points and they never provided a bios update to fix it.
I'm not telling you to run Linux, but if all else fails I'd definitely try a live version just to see if there's any stuttering.
Posted on Reply
Add your own comment
Nov 19th, 2026 08:22 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts