Tuesday, October 14th 2025

be quiet! Also Announces Pure Rock Slim 3 CPU Cooler

be quiet!, the German manufacturer for premium PC components, is announcing Pure Rock Slim 3, the latest evolution in its acclaimed Pure Rock series. Building on the success of Pure Rock Slim 2, Pure Rock Slim 3 combines a highly compact asymmetrical tower design with great efficiency, making it the perfect choice for compact gaming rigs and quiet multimedia systems.

"Pure Rock Slim 3 is designed to make silent, efficient cooling accessible to everyone," said Aaron Licht, CEO of be quiet!. "With its improved, rock-solid mounting system and whisper-quiet operation, we're giving PC builders of all experience levels a cooler that's easy to install and delivers high performance for compact systems."
Quiet and compact cooling
Pure Rock Slim 3 features a unique compact tower profile that enables full access to RAM banks in cases with limited space. The intuitive mounting system includes dedicated AMD and Intel frames and requires minimal screws, ensuring a fast and secure installation. At its core, three nickel-plated high-performance 6 mm heat pipes with heat-pipe direct-touch technology transport heat efficiently to the fin stack, delivering a high 130 W TDP cooling capacity for entry-level gaming and multimedia systems.

A specially designed be quiet! 100 mm PWM fan provides silent operation with a maximum noise level of just 24.8 dBA. PWM control allows users to fine-tune the balance between airflow and acoustics, ensuring smooth system performance under varying loads. The two-tone cooler top in matte black and gunmetal grey offers an unobtrusive yet elegant appearance that complements any build.

Pure Rock Slim 3 will be available through authorized retailers starting October 28, at a suggested retail price of $29.90 / €26.90 and comes with a three-year manufacturer's warranty.

For more information, visit the product page.
Add your own comment

9 Comments on be quiet! Also Announces Pure Rock Slim 3 CPU Cooler

#1
Chrispy_
What's going on here - is this direct-contact heatpipes or not?



It matters because direct contact heatpipes are becoming irrelevant for modern CPUs with their miniscule core clusters on teeny-tiny process nodes all dumping their total PPT or PL2 into one single heatpipe.
Posted on Reply
#2
Chaitanya
Chrispy_What's going on here - is this direct-contact heatpipes or not?



It matters because direct contact heatpipes are becoming irrelevant for modern CPUs with their miniscule core clusters on teeny-tiny process nodes all dumping their total PPT or PL2 into one single heatpipe.
According to product page, its indeed HDT, must be pre-applied TIM hiding that fact.
www.bequiet.com/en/cpucooler/6120
Posted on Reply
#4
kikimaru024
It's an interesting size (127mm tall, 100mm fan) but I'm not sure it has a niche.
Posted on Reply
#5
Chrispy_
kikimaru024It's an interesting size (127mm tall, 100mm fan) but I'm not sure it has a niche.
I didn't even spot the unusual fan size, I just assumed it was the usual 92mm fan.

It seems like a mismatch for the heatsink with a lot of airflow wasted below the heatsink fins, though the upside of that is that cooler air will be going towards the motherboard's VRM heatsink. Then again, if you can afford a motherboard with VRM heatsinks, you can probably afford something better than a 3-heatpipe, direct-contact heatsink, too.
Posted on Reply
#6
kikimaru024
Chrispy_I didn't even spot the unusual fan size, I just assumed it was the usual 92mm fan.

It seems like a mismatch for the heatsink with a lot of airflow wasted below the heatsink fins, though the upside of that is that cooler air will be going towards the motherboard's VRM heatsink. Then again, if you can afford a motherboard with VRM heatsinks, you can probably afford something better than a 3-heatpipe, direct-contact heatsink, too.
I see ID-COOLING has a new 100mm model now too that trumps this one.
4 heatpipes.
SE-904-XT BLACK
Posted on Reply
#7
Chrispy_
kikimaru024I see ID-COOLING has a new 100mm model now too that trumps this one.
4 heatpipes.
SE-904-XT BLACK
It's hard to know without a like-for-like test, but unless you don't have room for a 120mm tower, the Thermalright Burst Assassin 120 is vastly superior with 6 soldered heatpipes and a nickel-plated copper baseplate, and it's about $10/€10 cheaper than either the ID 904-XT or the BeQuiet! PRS3:



This is far from the best 120mm tower cooler, but it's decent - especially on modern CPUs using the latest process nodes with very small, dense core clusters. Direct contact heatpipes just don't handle those well, because it's not 2010 anymore! A mediocre 120mm baseplate cooler like this would be easy to ignore if it wasn't available for $18/€18/£16. Any other company would charge $35 for that, and Noctua charge $80.

You just get so much more value from Thermalright than anyone else at the moment. It makes budget coolers from other brands utterly redundant, unless you happen to live in one of those weird places where Thermalright aren't significantly cheaper than everything else.
Posted on Reply
#8
kikimaru024
Chrispy_It's hard to know without a like-for-like test, but unless you don't have room for a 120mm tower, the Thermalright Burst Assassin 120 is vastly superior with 6 soldered heatpipes and a nickel-plated copper baseplate, and it's about $10/€10 cheaper than either the ID 904-XT or the BeQuiet! PRS3:



This is far from the best 120mm tower cooler, but it's decent - especially on modern CPUs using the latest process nodes with very small, dense core clusters. Direct contact heatpipes just don't handle those well, because it's not 2010 anymore! A mediocre 120mm baseplate cooler like this would be easy to ignore if it wasn't available for $18/€18/£16. Any other company would charge $35 for that, and Noctua charge $80.

You just get so much more value from Thermalright than anyone else at the moment. It makes budget coolers from other brands utterly redundant, unless you happen to live in one of those weird places where Thermalright aren't significantly cheaper than everything else.
Sure, but those 2 models are sub-125mm (3U) height.
Posted on Reply
#9
Chrispy_
kikimaru024Sure, but those 2 models are sub-125mm (3U) height.
Yeah, but 3U is a such a weird niche for a consumer cooler. Just about every case supports 155mm towers, or it can't accommodate a tower at all. There are plenty of great 135mm-tall coolers for 3U that squeeze a 120mm fan, dual finstacks, a proper baseplate etc. I'm using a 134mm-tall Assassin 120 Mini in my cramped HTPC, The Silver Soul 135 exists for less than this, and there's no shortage of decent top-down 120mm coolers from Thermalright, Thermaltake, ID-Cooling, Scythe etc.

92mm and 100mm towers are just cheap junk these days. There aren't any with quailty baseplates and most of them don't even have enough heatpipes to make continuous contact. They are the worst of the worst - direct contact heatpipes with gaps.
Posted on Reply
Nov 16th, 2026 07:59 CST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts