Friday, October 23rd 2026

Audio-Technica Introduces ATH-AWX7000 Closed-Back Dynamic Wooden Headphones

Audio-Technica announces the introduction of its ATH-AWX7000 Closed Back Dynamic Wooden Headphones, combining ultimate audio performance with exquisite Japanese wood craftsmanship to create the company's finest headphones ever. The new ATH-AWX7000 features newly developed HMD (Hybrid Matrix Diaphragm) technology along with additional advancements and sets an extraordinary new sonic standard in audiophile dynamic headphones.

The housings of the ATH-AWX7000 are crafted from Kiso cypress, a prized wood used to construct Shinto shrines and Buddhist temples. The wood is hand-finished in traditional Echizen lacquer to bring out the natural color of the wood's grain. Over time, the color will darken, to add to the wood's beauty and distinctive character. The headphones' frame and other components are finished in the traditional Japanese deep navy hue of kachi-iro (the traditional lucky color of the samurai).
The lightweight magnesium frame features aluminium sliders that allow precise size adjustments, and deerskin is used for the earpads and headband for superior comfort and sound isolation. Like all Audio-Technica wooden headphones, the ATH-AWX7000 is manufactured in Tokyo, Japan, to the absolute highest standards.

Audio-Technica's newly-developed HMD Hybrid Matrix Diaphragm employs a composite material made from polymer film and a metal dome. It is manufactured using the company's HXDT molding process, which produces a large-diameter 58 mm diaphragm that can be aligned with the driver's high-efficiency magnet structure, voice coil and other components with extreme accuracy.
The HMD technology enables the composite diaphragm to maintain its shape even under high air pressure. By driving the air with a more precise pistonic motion even below the audible range, the result is a level of bass power and musical accuracy previously unattainable in other closed-back designs, with extraordinary sonic purity, resolution and dynamic impact. The sound is warm and lush, immersing the listener in an inviting musical expanse.

The ATH-AWX7000 comes with two detachable 8-braid cables with Audio-Technica's A2DC (Audio Designed Detachable Coaxial) connectors: a balanced 8-foot 2-inch (2.5 m) cable with a 4-pin Neutrik connector, and a 9-foot 8-inch (3.0 m) unbalanced cable with a 0.25-inch (6.3 mm) plug. Each ATH-AWX7000 comes with a compact carrying case.


The Audio-Technica ATH-AWX7000 Closed Back Dynamic Wooden Headphones are now available at a suggested US retail price of $3,799.
Source: Audio-Technica (product page)
Add your own comment

16 Comments on Audio-Technica Introduces ATH-AWX7000 Closed-Back Dynamic Wooden Headphones

#1
Onasi
…nah, thanks AT, if I really want wooden closed-backs, I would be fine with FT1s. That price is unreasonable. That’s electrostat territory. That’s summit-fi planar territory. What the actual fuck.
Posted on Reply
#2
Space Lynx
Astronaut
Onasi…nah, thanks AT, if I really want wooden closed-backs, I would be fine with FT1s. That price is unreasonable. That’s electrostat territory. That’s summit-fi planar territory. What the actual fuck.
that's STAX e-stat price range, what a joke of a price

also, using wood from rare trees that temples use just feels a bit gross to me... lol

edit: i take that back, i don't actually know if Japanese Cypress is rare, meh
Posted on Reply
#3
AGlezB
I'd buy them for $37.99 :laugh:
Posted on Reply
#4
Nomad76
News Editor
AGlezBI'd buy them for $37.99 :laugh:
Well, compared with a 5090 card, these audiophile headphones are now "really cheap" :peace:
Posted on Reply
#5
FR3D1
Ninja Cat
Nomad76a prized wood
Something like bog oak (deep, dark, heavy, and rock-hard subfossil hardwood) would be valuable, instead of softwood as in this case.

Regards,
Woodworm.
Posted on Reply
#6
KrazyT
A beautifully handcrafted object with fine materials.
It's what you're paying for.
Like a Rolls Royce.
If I wasn't caring about my hard earned money, I would buy it !
(In other words, if I win at the lottery, it will be an instant buy :) )
Posted on Reply
#7
unwind-protect
I am more interested in what the earpads are covered with. Because I have semi-expensive AT headphones where it suddenly disintegrated.
Posted on Reply
#8
Solaris17
Super Dainty Moderator
unwind-protectI am more interested in what the earpads are covered with. Because I have semi-expensive AT headphones where it suddenly disintegrated.
I love AT and I had a really old set that did this. I literally emailed them and they responded and I paid like $20 via paypal and they sent me new ones.
Posted on Reply
#9
xxxZAURxxx
I bet I could sell my PC case for a good price if I took it to Japan. :D

I built the whole thing at home—cutting, gluing, and sanding it all by hand.
Posted on Reply
#10
KrazyT
unwind-protectI am more interested in what the earpads are covered with. Because I have semi-expensive AT headphones where it suddenly disintegrated.
Solaris17I love AT and I had a really old set that did this. I literally emailed them and they responded and I paid like $20 via paypal and they sent me new ones.
Same here, bought same replacement part for AT, but with age, start to disintegrated again;
So, I went to alternative route, bought a kind of compatible one, made of soft kind of fabric, and so far so good !
Posted on Reply
#11
unwind-protect
Solaris17I love AT and I had a really old set that did this. I literally emailed them and they responded and I paid like $20 via paypal and they sent me new ones.
Oh, thanks so much. Gotta do that.
Posted on Reply
#12
kazuviking
OnasiThat’s summit-fi planar territory.
Ah the absolute garbage tuning sold for unreasonable pricing with the most marketing bullshit you ever read.
KrazyTA beautifully handcrafted object with fine materials.
It's what you're paying for.
Like a Rolls Royce.
If I wasn't caring about my hard earned money, I would buy it !
(In other words, if I win at the lottery, it will be an instant buy :) )
Dan Clarks exists which makes these looks like cheap toys.
Posted on Reply
#13
KrazyT
kazuvikingDan Clarks exists which makes these looks like cheap toys.
Yes, if you says so ...
I've checked your Dan Clarks ...
Where are the fine materials beautifully handcrafted ?
No denying that they're good headphones, but some people like me, value craftmanship and fine materials more than tech and numbers.
With my point of view, the Dan Clarks feels like cheap toys ;)
Posted on Reply
#14
kazuviking
KrazyTWhere are the fine materials beautifully handcrafted ?
You mean mass produced in china then sold to you as handmade in japan?
KrazyTvalue craftmanship and fine materials more than tech and numbers.
Audio Technica haven't innovated in the headphone space for years. They just slap some "exotic" wood on their poorly selling headphone models and call it special.
Posted on Reply
#15
Onasi
kazuvikingAh the absolute garbage tuning sold for unreasonable pricing with the most marketing bullshit you ever read.
*shrug* I happen to agree with you on this in terms of a lot of models. I prefer the sound of much more budget planars, quite a lot of good ones out there. But you would be hard pressed to convince any audiophile that something like Susvara isn’t the absolute pinnacle of sound and is totally worth *insert whatever it is priced at now*.
Posted on Reply
#16
KrazyT
kazuvikingYou mean mass produced in china then sold to you as handmade in japan?
Certainly not this model.
My headset gaming is made in China, right, my other one is made in Japan.
Check a bit please.
kazuvikingAudio Technica haven't innovated in the headphone space for years. They just slap some "exotic" wood on their poorly selling headphone models and call it special.
And, what's the point ?
As I said, some prefer handcraft and materials.
It's just your thoughts, and I respect that, but we're not agreeing on this.
Posted on Reply
Add your own comment
Nov 12th, 2026 21:39 PST change timezone

New Forum Posts

Popular Reviews

TPU on YouTube

Controversial News Posts