Looking for the download? Click here

TechPowerUp GPU-Z

TechPowerUp GPU-Z v2.28.0

Latest
December 9th, 2019 - What's New
  • 6.8 MB

    Standard Version

    GPU-Z.2.28.0.exe
    8B6C5F4D623B45BB2E490C0EC10D4F3B
  • 6.9 MB

    ASUS ROG Themed

    GPU-Z_ASUS_ROG_2.28.0.exe
    BDB71FF252B145E0F5E056D0BA5C75B5
Get Notified
Receive an E-Mail when this download is updated.
Publisher: TechPowerUp
Downloaded: 63,016,460 times (161.2 TB)

GPU-Z is a lightweight utility designed to give you all information about your video card and GPU.

Version History

v2.28.0 (December 9th, 2019)

  • Added support for AMD Radeon RX 5500 XT, Radeon Pro W5700
  • Added support for upcoming AMD graphics driver
  • Fixed VRAM reporting on 4 GB Navi cards to show correct value
  • Improved detection for AMD RX 470D, RX 560 Mobile, Picasso, Raven Ridge
  • Fixed clock readings on older ATI graphics cards
  • Added DirectX Support reporting for ATI R200 GPUs

v2.27.0 (November 18th, 2019)

  • Added support for AMD Radeon Pro Vega 48, FirePro A300
  • Added support for NVIDIA GeForce GTX 1660 Super, GTX 1650 Super, GTX 1650 Max-Q, GeForce 945A, Tesla V100-SXM2-16GB, Tesla P4, Tesla K8
  • Advanced Tab now shows PCI bus location of the device
  • Fixed crash on very old CPUs due to missing SSE instructions
  • Fixed EVGA ICX fan speeds not reported on GeForce 20
  • Fixed sensors showing all "0" on some AMD CrossFire setups
  • Improved default clock reporting on NVIDIA, even with no driver installed
  • Fixed wrong memory clock reported on NVIDIA when two cards with different memory types installed

v2.26.0 (October 8th, 2019)

  • Fixed GPU-Z crashing during BIOS save on nearly all recent NVIDIA cards
  • Fixed crash on startup on Navi when no driver installed
  • Fixed ASUS ROG window getting cut off at bottom, hiding the "Close" button
  • Added support for AMD Radeon RX 5500 & RX 5500 Mobile
  • Updated the AMD memory temperature tooltip to clarify that it shows memory junction temperature, and that the value is the temperature of the hottest chip (not average)
  • Moved reset button on sensors tab by one pixel to properly align it
  • Reverted AMD fan-stop-detect-workaround, which was added in last version, because it introduced misreadings. AMD has fixed their driver since 19.9.1
  • Fixed PCIe idle speed reported for Vega 20
  • Fixed CrossFire detection on Navi and Vega 20
  • Fixed NVIDIA Quadro NVS 300 getting reported as fake
  • Added fake detection for cards using NVIDIA GK107 & GK208
  • Added fake detection for GeForce GTX 1050 Ti based on GK107
  • Added support for TU104-based RTX 2060 and Quadro P520

v2.25.0 (September 10th, 2019)

  • First tab now shows support status for Vulkan, DirectX Raytracing, OpenGL & DirectML
  • Fixed bluescreen in QEMU/KVM virtual machine caused by MSR register access
  • Improved clock speed reporting for AMD Navi
  • Advanced tab now shows Base, Game and Boost clock on Navi
  • Added workaround for stuck fan speeds when fan-stop is active on AMD
  • Added workaround for 65535 RPM fan speed reported on Navi
  • When BIOS upload is finished show "Finished"
  • Added support for NVIDIA Quadro P2200, Quadro RTX 4000 Mobile, Quadro T1000 Mobile
  • Added support for AMD Radeon Pro WX 3200, Barco MXRT 7600, 780E Graphics, HD 8330E
  • Added support for Intel Ice Lake