790i Ultra Spray Paint Mod Log

beesagtig · Dec 28, 2008

sweet

have you tried stress testing it yet?

heat it up a bit and see if everything stays working?

DaMulta · Dec 28, 2008

About to start up prime.

I am oced too!!

p_o_s_pc · Dec 28, 2008

do you think it is ok to test after 4hrs? or do you think i should force myself to go to bed so i don't try it?

DaMulta · Dec 28, 2008

IDK it was 15 mins on the can LOL

p_o_s_pc · Dec 28, 2008

DaMulta said:
IDK it was 15 mins on the can LOL

so your telling me to plug the power in and give it a test?

DaMulta · Dec 28, 2008

Had to lower my PLL voltage. Might of saved during the wrong loop when tweaking ram...IDK I hate this chip I need to throw in the quad.

Also made my ram timing a little better. up the voltage there just a tad

Still running prime no issues.
6mins

DaMulta · Dec 28, 2008

p_o_s_pc said:
so your telling me to plug the power in and give it a test?

p_o_s_pc · Dec 28, 2008

DaMulta said:

ok will do. I just want to make sure all the tape if off the mosfets i covered EVERY mosftet i could find so it may take awhile

DaMulta · Dec 28, 2008

I only did the ones that had heat sinks on them.

Noting feels hot.

I got rid of that pad they used to cool them with the blocks and used AS5!!!!

Plastic bag/AS5/mosftets light light touch and smear.

The only way LOL....

p_o_s_pc · Dec 28, 2008

doing it now...
looks like all the tape is off

steelkane · Dec 28, 2008

Kick-ass, glad to see she fired up,, keep us posted, I was wonder if the paint will crack over time.

p_o_s_pc · Dec 28, 2008

I just tested mine and it works! I took a pic but the batts went dead. I will post pics when i get off my lazy ass and find what i did with the other ones

DaMulta · Dec 28, 2008

steelkane said:
Kick-ass, glad to see she fired up,, keep us posted, I was wonder if the paint will crack over time.

IT did around the screw holes. Have to touch up those at some point. I think if you had a rubber on the screws that problem would go away when putting the board on the tray. It didn't do it bad tho.
---

How far should I take it LOL.

I'm thinking all over the board and not on the chips with the silver. Red on chips, and another on caps.

p_o_s_pc said:
I just tested mine and it works! I took a pic but the batts went dead. I will post pics when i get off my lazy ass and find what i did with the other ones

LOL I'm on my phone ATM for that reason!!!!

p_o_s_pc · Dec 28, 2008

mine didn't creak around the screw holes :wtf:

maybe i just didn't put them as tight?

DaMulta · Dec 28, 2008

Do you use case screws?

steelkane · Dec 28, 2008

good info about the cracking,, too bad you don't own a airbrush, for detail work

p_o_s_pc · Dec 28, 2008

DaMulta said:
Do you use case screws?

yes. I used some black ones that came with something but i don't remember what :laugh:

DaMulta · Dec 28, 2008

Well I used normal ones. I did wait over a day to install it. Maybe yours was not 100% dry when you installed it. I'm pulling mine to paint the tray in the morning.

Oh also if you have led lights on your board. At least with white they still light up just fine. I painted right over them.

p_o_s_pc · Dec 28, 2008

DaMulta said:
Well I used normal ones. I did wait over a day to install it. Maybe yours was not 100% dry when you installed it. I'm pulling mine to paint the tray in the morning.

Oh also if you have led lights on your board. At least with white they still light up just fine. I painted right over them.

i don't think that i have any LEDs on my board. If i do i sure don't see them now. I am sure i used normal screw but they are just painted black. they look like what came with my Antec 300 but the ones that came with it aren't painted... maybe it isn't 100% dry like you said... hmm i am going to pull the power right now and wait till i wake up tomorrow

DaMulta · Dec 28, 2008

Well he heat from the chips is going to dry it out fast no matter what LOL.

p_o_s_pc · Dec 28, 2008

DaMulta said:
Well he heat from the chips is going to dry it out fast no matter what LOL.

yea that is true but i don't want to chance shorting something out after making it this far :laugh:

also if you check my thread you will see that there is a pic of the rig running.

Hayder_Master · Dec 28, 2008

great idea with clean work , so this paint don't increase temperature of mosfets and rds's

DaMulta · Dec 28, 2008

They don't feel hot.

You seen the ones I covered up. Which were the ones they covered up.

beesagtig · Dec 28, 2008

I wonder if painting it makes the mobo die quicker or last longer and if so by how much...

DaMulta · Dec 28, 2008

I'm not worried any more!

Processor	E8400
Motherboard	eVGA 780i
Cooling	Xigmatec S1283
Memory	4gb OCZ Platinum
Video Card(s)	XFX 9800GTX
Storage	Seagate 500gb 32mb cache x 2
Display(s)	Benq T22IW 1680X1050/Acer AL1716 1280X1024 x 2
Case	Antec 1200
Audio Device(s)	Intergrated
Power Supply	CoolerMaster 650W Extreme SLI Ready
Software	Vista Home Premium 64bit

System Name	Work in progress
Processor	AMD 955---4Ghz
Motherboard	MSi GD70
Cooling	OcZ Phase/water
Memory	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s)	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage	SSD 64GB
Display(s)	Envision 24'' 1920x1200
Case	Using the desk ATM
Audio Device(s)	Sucky onboard for now :(
Power Supply	1000W TruePower Quattro

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Work in progress
Processor	AMD 955---4Ghz
Motherboard	MSi GD70
Cooling	OcZ Phase/water
Memory	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s)	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage	SSD 64GB
Display(s)	Envision 24'' 1920x1200
Case	Using the desk ATM
Audio Device(s)	Sucky onboard for now :(
Power Supply	1000W TruePower Quattro

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Stealth 2 Duo Turbine
Processor	Intel e6850 @ 3.8ghz
Motherboard	Asus Striker Extreme
Cooling	CoolerMaster V8 Modded With 2 white LED's & 100CFM fan
Memory	OCZ DDR2 1066_ SLI Black-4GB
Video Card(s)	2xMSI 8800GT"s SLI
Storage	<<HDD For OS>> 2x150GB_Western Digital Raptor_Raid 0. <<HDD For Storage>> 3 x 1TB
Display(s)	ACER B273HU 27" LCD 2048x1152
Case	Apex SuperCase_Custom 7 month Build
Audio Device(s)	Striker Extreme Add-In Card HD-Audio
Power Supply	EnerMax INFINITI 720watt
Software	SE7VEN ULTIMATE 64bit
Benchmark Scores	3DMark01=NTTA, 3Dmark06=NTTA 3Dmark_Vantage=NTTA, Core Temp v0.99.5=28C

System Name	MASTER
Processor	Core i7 3930k run at 4.4ghz
Motherboard	Asus Rampage IV extreme
Cooling	Corsair H100i
Memory	4x4G kingston hyperx beast 2400mhz
Video Card(s)	2X EVGA GTX680
Storage	2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s)	Samsung 27' 1080P LED 3D monitior 2ms
Case	CoolerMaster Chosmos II
Audio Device(s)	Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply	Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software	Win7 64bit Ultimate
Benchmark Scores	3d mark 2011: testing

790i Ultra Spray Paint Mod Log

New Member

My stars went supernova

F@H&WCG addict

My stars went supernova

F@H&WCG addict

My stars went supernova

My stars went supernova

F@H&WCG addict

My stars went supernova

F@H&WCG addict

F@H&WCG addict

My stars went supernova

F@H&WCG addict

My stars went supernova

F@H&WCG addict

My stars went supernova

F@H&WCG addict

My stars went supernova

F@H&WCG addict

My stars went supernova

New Member

My stars went supernova