- Joined
- Oct 6, 2009
- Messages
- 2,820 (0.53/day)
- Location
- Midwest USA
System Name | My Gaming System |
---|---|
Processor | Intel i7 4770k @ 4.4 Ghz |
Motherboard | Asus Maximus VI Impact (ITX) |
Cooling | Custom Full System Water cooling Loop |
Memory | G.Skill 1866 Mhz Sniper 8 Gb |
Video Card(s) | EVGA GTX 780 ti SC |
Storage | Samsung SSD EVO 120GB - Samsung SSD EVO 500GB |
Display(s) | ASUS W246H - 24" - widescreen TFT active matrix LCD |
Case | Bitfenix Prodigy |
Power Supply | Corsair AX760 Modular PSU |
Software | Windows 8.1 Home Primeum |
Alright guys I am getting frustrated....... I am trying to raise my over clock from 3.66 to 3.8 and then possibly to 4.0...... but we will start with the 3.8 first because that is next in the stepping stone.
Here's what I have tried and everything below these settings I have tried too.....
CPU Frequency:190
CPU Mult: x20
PCIe:100
QPI Frequency: 4.27GTs
MCH: Auto
VDroop: With out Vdroop
Eventual Vcore: 1.33
Boot Vcore: 1.33
DIMM: 1.50(Per G.Skill)
Boot CPU VTT: 1.15
Eventual CPU VTT:1.15
PCH:1.10
CPU PLL:1.87
RAM Ratio: 2:8
Timmings: 9-9-9-24 CMD 1T(Even though supposed to be 2T)
RAM SPD: @1446Mhz (capable of 1600MHZ)
C1E: Disabled
ESIT: Disabled
c2/c3/c4 exc...: Disabled
Still no stable in either Intel Burn Test or LinX (Haven't tried Prime95) but memory runs fine in Memtest86+.
When I am running either IBT or LinX I use as much RAM as possible plus running with 20 runs.
Usually can't get past 12 runs.
I am at a loss I am having a hard time believing getting to 3.8 is going to be up at 1.34volts or higher. That seems like crazy overkill. Also I have got 3.7 to be stable @ 1.31 Volts so 3.8 would be that much higher?
Any thoughts? Or if someone had similar experiences please share them. Or for that matter if anyone would like to display their settings feel free.
My Specs are...
intel i5
EVGA P55 LE
Diamond ATI HD5870
2xWestern Digital 500gig Black Carver
4 Gigs G.skill Ripjaw Ram 1600Mhz@1466Mhz
Corsair 750TX
Thanks in advance!
________________
Here's what I have tried and everything below these settings I have tried too.....
CPU Frequency:190
CPU Mult: x20
PCIe:100
QPI Frequency: 4.27GTs
MCH: Auto
VDroop: With out Vdroop
Eventual Vcore: 1.33
Boot Vcore: 1.33
DIMM: 1.50(Per G.Skill)
Boot CPU VTT: 1.15
Eventual CPU VTT:1.15
PCH:1.10
CPU PLL:1.87
RAM Ratio: 2:8
Timmings: 9-9-9-24 CMD 1T(Even though supposed to be 2T)
RAM SPD: @1446Mhz (capable of 1600MHZ)
C1E: Disabled
ESIT: Disabled
c2/c3/c4 exc...: Disabled
Still no stable in either Intel Burn Test or LinX (Haven't tried Prime95) but memory runs fine in Memtest86+.
When I am running either IBT or LinX I use as much RAM as possible plus running with 20 runs.
Usually can't get past 12 runs.
I am at a loss I am having a hard time believing getting to 3.8 is going to be up at 1.34volts or higher. That seems like crazy overkill. Also I have got 3.7 to be stable @ 1.31 Volts so 3.8 would be that much higher?
Any thoughts? Or if someone had similar experiences please share them. Or for that matter if anyone would like to display their settings feel free.
My Specs are...
intel i5
EVGA P55 LE
Diamond ATI HD5870
2xWestern Digital 500gig Black Carver
4 Gigs G.skill Ripjaw Ram 1600Mhz@1466Mhz
Corsair 750TX
Thanks in advance!
________________
Last edited: