Your PC ATM

[pantherx12]

sweet, those a bigass cases

Yeah, its to big for my desk

Going to have to put a height adjustable stool by my desk in order to hold the front up



*edit*

Thing is going to weigh 88 lb when I've got my gear fitted ha ha

 

[fatguy1992]

Meh my cooling weights 110lb alone

 

[STUdog]

nice

hey fatguy where u at in brisbane?

 

[fatguy1992]

North side, Redcliffe.

 

[STUdog]

oh nice, im at aspley

 

[ShRoOmAlIsTiC]

Got everything in my rosewill challenger case. Not bad for 60 dollar shipped case

 

[STUdog]

that case looks sic, love the paint effect, did it come like that?

Kinda same size as my cm scout, just manages to fit in a gtx260.

 

[ShRoOmAlIsTiC]

yeah thats teh stock case. probly the best sub 50 dollar case out there.
http://www.newegg.com/Product/Produ...47153&cm_re=challenger-_-11-147-153-_-Product

I got mine with cheap shipping + taxes

first case I ever owned that had the cable management holes. not sure if I did it right but it works. also my first case that has front audio, usb, and esata.

 

[Radical_Edward]

Looks good, but bottom mount PSU isn't really my thing.

Otherwise, it's a very clean rig. What's that X-Fi card? Sound? Also, what PSU is that?

 

[pantherx12]

Cable management ould be better but not bad for your first case with the capability of hiding the wires

Kudos on reverse mounting the HDDS too, always looks so much better.


By the by the Rosewill case is a CASECOM case, model 6788 : ]

You can buy them from Ebuyer if your in the UK.


Give me a bit and I'll go take a picture of my other set up inside it.

( wish i had modular psu though, cables were to short so management is shite)

 

[ste2425]

Got everything in my rosewill challenger case. Not bad for 60 dollar shipped case
http://i158.photobucket.com/albums/t83/shroomalistic/for sale/100_5863.jpg

you could run the other mobo power conector, npt the 24pin one, under your graphics cards, other then that looks rather nice, like the psu

 

[Thrackan]

you could run the other mobo power conector, npt the 24pin one, under your graphics cards, other then that looks rather nice, like the psu

It should fit under the mobo too

 

[alucasa]

Mine.

Excuse the size, lol.
Spec is in my signature & my system spec.

 

[pantherx12]

That's sweet, I really want to build a micro pc sometime!

 

[ShRoOmAlIsTiC]

Looks good, but bottom mount PSU isn't really my thing.

Otherwise, it's a very clean rig. What's that X-Fi card? Sound? Also, what PSU is that?

The X-Fi is a Titanium Fatality Pro pcie sound card and the PSU is a PC Power and Cooling 750w Red edition.

you could run the other mobo power conector, npt the 24pin one, under your graphics cards, other then that looks rather nice, like the psu

Ill git it a try

It should fit under the mobo too

not long enough to go that route.

 

[pantherx12]

I had the same problem, damn short cables.

Under the left hand side of GPUS is definitely the way forward though, also doesn't require a mother board uninstallation which is handy.

 

[ShRoOmAlIsTiC]

thanks guys , im gonna give that shot. right now its all the way against the board so its not too bad but that would deffinitly help out chipset cause its most likely keeping airflow from witthe way it is now.

 

[Chicken Patty]

Well you'll know me. Always messin' with my rigs. Here we go.

***NOTE*** excuse the horrible colors and focus on the pics. Going to bed, quick shots. Didn't pay much attention to them.

The Core i7 920 dedicated cruncher/bencher

And my Phenom II rig out of the case and onto the Torture Rack. I got some nice plans for this bad boy

 

[p_o_s_pc]

what happened to the H50 on the PII?

 

[Chicken Patty]

what happened to the H50 on the PII?

Can't mount it on the Rack. Remember its a whole unit so I if I mount on the outside with tube facing in they interfere with the rack and if I mount it outside with tubing facing out they are not long enough to reach the CPU. I'm thinking of ordering a PCI Wherever rack and putting it on there. What do you think?

 

[p_o_s_pc]

Can't mount it on the Rack. Remember its a whole unit so I if I mount on the outside with tube facing in they interfere with the rack and if I mount it outside with tubing facing out they are not long enough to reach the CPU. I'm thinking of ordering a PCI Wherever rack and putting it on there. What do you think?

that may work out decently. it sucks that you can't mount it without anything else

 

[HammerON]

Well you'll know me. Always messin' with my rigs. Here we go.

***NOTE*** excuse the horrible colors and focus on the pics. Going to bed, quick shots. Didn't pay much attention to them.

The Core i7 920 dedicated cruncher/bencher
http://img.techpowerup.org/100225/P2254445resized.jpg
http://img.techpowerup.org/100225/P2254446resized.jpg

And my Phenom II rig out of the case and onto the Torture Rack. I got some nice plans for this bad boy

http://img.techpowerup.org/100225/P2254447resized.jpg
http://img.techpowerup.org/100225/P2254450resized.jpg
http://img.techpowerup.org/100225/P2254451resized.jpg

Like your new Tech Station

 

[Chicken Patty]

that may work out decently. it sucks that you can't mount it without anything else

I bought some screws and all, I couldn't figure it out

 

[sneekypeet]

I know this is sacrilegious to even mention.....but hear me out.

What if you were to notch the two tubing holes in the 3rd image, on the right in front of the fan.
If the tubing on the H50 in fact lines up. Then you could mount it outside and let the hoses go toward the CPU

 

[p_o_s_pc]

I bought some screws and all, I couldn't figure it out

Take a look at it again and then if you can't get it get the anywhere rack