Overclocking help

[landstad]

Dude this has been the most unclear post i have ever read. You changed your opinion about his board in one post more times @landstad has changed hardware in all his threads on TPU. And he has been thru a lot in the past month

Hæhæhæ

 

[Schmuckley]

Take it for what it is..
I told ya once, I ain't tellin' you again
From here out,It's on you.

It's like this:Yes your board is 8+2 phase..
but it's MSI ..i wouldn't trust it..might be OK for air/water clocks.

might blow up, too.

I wouldn't be running 4.3-4 daily on a Thuban with that board..

If you get 4.1-2 with say..1.42v vcore or less.. ok

 

[landstad]

Take it for what it is..
I told ya once, I ain't tellin' you again
From here out,It's on you.

It's like this:Yes your board is 8+2 phase..
but it's MSI ..i wouldn't trust it..might be OK for air/water clocks.

might blow up, too.

I wouldn't be running 4.3-4 daily on a Thuban with that board..

If you get 4.1-2 with say..1.42v vcore or less.. ok

I'll do some more reasearch before i try to clock more i think.

Should i monitor my motherboard to see if the clock is safe ? other test's than Prime and occt.
and how do i do that ?

 

[CAPSLOCKSTUCK]

Pretty soon the only thing that will sensibly monitor your rig will be a smoke alarm.

Google is your friend........... As is TPU but please do some reading.

 

[landstad]

Pretty soon the only thing that will sensibly monitor your rig will be a smoke alarm.

Google is your friend........... As is TPU but please do some reading.

Yes Mr.

I'm already in google reading

it's the patience that don't exist, but guess i have to learn that too

 

[Schmuckley]

I'll do some more reasearch before i try to clock more i think.

Should i monitor my motherboard to see if the clock is safe ? other test's than Prime and occt.
and how do i do that ?

Some monitoring programs /motherboards have vrm temp sensors.. http://openhardwaremonitor.org/
I wouldn't run Prime or OCCT on a Thuban..
All that's going to do is make unnecessary heat and degrade chip prematurely.
I'd use Hyper Pi 32m : http://www.virgilioborges.com.br/hyperpi/

 

[landstad]

Some monitoring programs /motherboards have vrm temp sensors.. http://openhardwaremonitor.org/
I wouldn't run Prime or OCCT on a Thuban..
All that's going to do is make unnecessary heat and degrade chip prematurely.
I'd use Hyper Pi 32m : http://www.virgilioborges.com.br/hyperpi/

Okey,

It says tmpin0-1-2 wich one is VRM temp ?
And how high can it be before i shut it down ?

 

[Schmuckley]

need pics..
printscreen+ paste to paint..

 

[landstad]

need pics..
printscreen+ paste to paint..

http://www.overclock.net/t/1545389/msi-970-gaming-amd-phenom-tm-ii-x6-1100t-oc-help


EDIT: 2035.CET


When I tried to start up my computer with patchgaurd disabled, it shuted down..
Why would that happend ?

EDIT: @Schmuckley

I asked you wich of the temp indicators that is VRM heatsink, never got any answear tho..

 

[Schmuckley]

I have no idea what patchguard is.

 

[krusha03]

View attachment 63252

http://www.overclock.net/t/1545389/msi-970-gaming-amd-phenom-tm-ii-x6-1100t-oc-help


EDIT: 2035.CET


When I tried to start up my computer with patchgaurd disabled, it shuted down..
Why would that happend ?

So they pretty much told you what I did. Up to 1.45V you should be fine and be careful that the core temperature doesnt go above 62C during stress testing. what is patch guard? do you mean boot or thermal guard?

 

[CAPSLOCKSTUCK]

is patchguard one of these ?

Spoiler

 

[landstad]

is patchguard one of these ?

Spoiler

hehehe

 

[landstad]

hehehe

So they pretty much told you what I did. Up to 1.45V you should be fine and be careful that the core temperature doesnt go above 62C during stress testing. what is patch guard? do you mean boot or thermal guard?

Yepp

Google patch gaurd

 

[krusha03]

Yepp

Google patch gaurd

I googled and couldnt find anything that looks relevant. Can you post a link

 

[landstad]

I googled and couldnt find anything that looks relevant. Can you post a link

http://forum.xda-developers.com/showthread.php?t=2488560

 

[Schmuckley]

I tell you wat..
I've OC'd lots of Thubans and never run into patch guard
Here's mah best one: http://valid.canardpc.com/llyyjn
I like that Thuban..I still have it.
Sure i could get $110 for it..eh..I'd rather keep it.
I have a true love for Thuban.

 

[landstad]

I tell you wat..
I've OC'd lots of Thubans and never run into patch guard
Here's mah best one: http://valid.canardpc.com/llyyjn
I like that Thuban..I still have it.
Sure i could get $110 for it..eh..I'd rather keep it.
I have a true love for Thuban.

You serious man, wow 6+ ghz awsome



@krusha03

could you recomend some cooling for my VRM ?


EDIT: I found out, i could just use a fan

 

[CAPSLOCKSTUCK]

You serious man, wow 6+ ghz awsome

please, please, please do more reading before you try and do what @Schmuckley has done, you have wrecked enough components recently,

I would recomend one of these fans

it is an 18 inch high velocity floor fan.

 

[landstad]

please, please, please do more reading before you try and do what @Schmuckley has done, you have wrecked enough components recently,

I would recomend one of these fans

it is an 18 inch high velocity floor fan.

http://www.overclock.net/t/1545389/msi-970-gaming-amd-phenom-tm-ii-x6-1100t-oc-help#post_23644863

Check what they have said there.

i'll try boost it up too 4ghz

but first I have to cool my vrm, I have two 120" fans i can use, but i dono where VRM heatsink i located.. could you post a picture and point it out.

 

[Schmuckley]

I'm guessing you have integrated sinks on your mobo..
I like these fans
http://www.newegg.com/Product/Product.aspx?Item=N82E16835705003
The Gappo guide is the key..I swear it is..
He tells you how to do it..
I already knew that...but indeed he is correct
PS: Don't expect 6.4 Ghz w/o LN2
Do expect 4.3=4.7
Don't overheat your chip..this is key.

 

[krusha03]

http://www.overclock.net/t/1545389/msi-970-gaming-amd-phenom-tm-ii-x6-1100t-oc-help#post_23644863

Check what they have said there.

i'll try boost it up too 4ghz

but first I have to cool my vrm, I have two 120" fans i can use, but i dono where VRM heatsink i located.. could you post a picture and point it out.

The vrm heatsink is the one left from the cpu socket. Between the socket and the I/o back panel

 

[landstad]

I'm guessing you have integrated sinks on your mobo..
I like these fans
http://www.newegg.com/Product/Product.aspx?Item=N82E16835705003
The Gappo guide is the key..I swear it is..
He tells you how to do it..
I already knew that...but indeed he is correct
PS: Don't expect 6.4 Ghz w/o LN2
Do expect 4.3=4.7
Don't overheat your chip..this is key.

Yes I have two fans like that.
okey.

62c is the limit right ?

I try push it up to 4ghz then i'm satisfied, and i'll see 17 march, how good that is for the new battlefield game.

The vrm heatsink is the one left from the cpu socket. Between the socket and the I/o back panel

how can i get a fan over there? Equip it in ti my side panel..?

maybee this would work.

 

[krusha03]

I have a ram cooler there. You can try something like you did with the zip ties also but see if you can secure it below the radiator

 

[krusha03]

Also is your case bent in the back?