Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.
I need a way to bring DTS Neo PC and its upmix back to Windows 11, any thoughts on this?
I have a Philips PWR2006-01 connected to the analog outputs of my ASUS TUF B550m-Plus and I get no bass on the speakers due to windows outputting the audio only through the main FL/FR speakers instead of using at least 2.1
(Everything works fine if playing a 5.1 audio file, my problem is when I want to play song/stereo files through the system)
Hi,
Let me start by saying thank you for the driver. I'm using it on Nvidia HDMI connection to TV-AVR to get dolby digital on Win 11 22h2. When it is working it works flawlessly, but for some reason when i switch display to DP monitor and the going back to TV there's no sound in speakers anymore but I can see on volume gauge in Windows that the sound is outputting. Sound on monitor is always working, even if i switch it to dolby digital. Sometimes i have to switch between Monitor and TV multiple times in windows to get it working. Another strange thing i have found is when i switch it to Dolby Atmos in windows (for the hdmi tv source) the sound appears on my DP monitor (when in screen extend mode) What could be cause of that behavior??
Update: cloning option always plays sound on TV-AVR setup without any issues - but in my case is unusable
Hi,
Let me start by saying thank you for the driver. I'm using it on Nvidia HDMI connection to TV-AVR to get dolby digital on Win 11 22h2. When it is working it works flawlessly, but for some reason when i switch display to DP monitor and the going back to TV there's no sound in speakers anymore but I can see on volume gauge in Windows that the sound is outputting. Sound on monitor is always working, even if i switch it to dolby digital. Sometimes i have to switch between Monitor and TV multiple times in windows to get it working. Another strange thing i have found is when i switch it to Dolby Atmos in windows (for the hdmi tv source) the sound appears on my DP monitor (when in screen extend mode) What could be cause of that behavior??
Update: cloning option always plays sound on TV-AVR setup without any issues - but in my case is unusable
Hoping someone can help me. I had the drivers installed and was pleased, but then for some reason they disappeared. I have reinstalled them many times and uninstalled all drivers related to this with Driver Store Explorer. Now when I reinstall, AAF Optimus still will not show up in the list of available devices no matter how many times I delete the old AAF and Realtek drivers and reinstall using the newest version. Below is what it currently looks like even though I have installed the drivers again. Any help is appreciated. Thank you!
Hi,
Let me start by saying thank you for the driver. I'm using it on Nvidia HDMI connection to TV-AVR to get dolby digital on Win 11 22h2. When it is working it works flawlessly, but for some reason when i switch display to DP monitor and the going back to TV there's no sound in speakers anymore but I can see on volume gauge in Windows that the sound is outputting. Sound on monitor is always working, even if i switch it to dolby digital. Sometimes i have to switch between Monitor and TV multiple times in windows to get it working. Another strange thing i have found is when i switch it to Dolby Atmos in windows (for the hdmi tv source) the sound appears on my DP monitor (when in screen extend mode) What could be cause of that behavior??
Update: cloning option always plays sound on TV-AVR setup without any issues - but in my case is unusable
I'm experiencing the same issue on Windows 11 22H2.
I have an RTX 3080 connected via HDMI to LG CX > optical to AVR.
Before one of the Windows updates it used to work perfectly. Now I'm getting no sound even though I can see on the Windows volume gauge that the sound is outputting.
It only works the first time once I remove all the drivers, re-install the nvidia driver, install AAF Optimus driver. On the next reboot there is no sound whatsoever.
Hello Alan. Thanks a lot for your contributions!
I have a Samsung HW-Q60R Soundbar connected via HDMI to a RTX3080.
Had to do the EDID override trick with CRU for it to show all 5.1 channels. However, although Dolby Digital is listed within "Default Format", it only outputs two channels. No matter what I do.
Nvidia HDMI driver was replaced with yours.
Please advice. I also have a Realtek-based motherboard. At one time, I could do DDL via SPDIF to the same soundbar.
Thanks!
I'm experiencing the same issue on Windows 11 22H2.
I have an RTX 3080 connected via HDMI to LG CX > optical to AVR.
Before one of the Windows updates it used to work perfectly. Now I'm getting no sound even though I can see on the Windows volume gauge that the sound is outputting.
It only works the first time once I remove all the drivers, re-install the nvidia driver, install AAF Optimus driver. On the next reboot there is no sound whatsoever.
the Dolby Atmos app should be included in the modded driver pack; there should be an option to install it during setup (look at the setup options carefully)
the Dolby Atmos app should be included in the modded driver pack; there should be an option to install it during setup (look at the setup options carefully)
I keep getting this error when trying to use Dolby Atmos after some hours of normal use. "There is a problem accessing the Dolby Atmos driver. Please restart the computer or reinstall the driverif the problem persists.". The problem i that it keeps happening after a while even if I reinstall the driver.
And the DTS licences completely "vanished". I can't seem to get it working again even after a clean reinstall.
I keep getting this error when trying to use Dolby Atmos after some hours of normal use. "There is a problem accessing the Dolby Atmos driver. Please restart the computer or reinstall the driverif the problem persists.". The problem i that it keeps happening after a while even if I reinstall the driver. View attachment 274019
And the DTS licences completely "vanished". I can't seem to get it working again even after a clean reinstall. View attachment 274020
You may have installed the wrong modpack. There's one made for "generic audio device" and one for "Realtek Audio Device".
Wait a minute, does this mean I can send Dolby Atmos to my Polk soundbar via optical using True HD audio stream?? If so thank you so much, will def be donating
NEW DCH DRIVERS RELEASED IN GITHUB
MORE DETAILS IN 1st PAGE
ATTENTION: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.
ATTENTION: Before installing this modified driver, be sure to remove any and all residues from previous Realtek audio drivers or even if there are residues from previous versions of my mods, if they persist. For this you will need the DriverStoreExplorer (by @lostindark). Remove any drivers whose vendor is "A-Volute", "Dolby", "DTS", "Creative", "AAF Optimus", etc in the Sound, Video and Game Controllers, Extensions, Software Components and Audio Processing Objects categories.
Those who want only Realtek material, just choose the panel option (HDA or UAD) and deselect the rest.
Greetings to all sound enthusiasts, who want to have a better audio experience on their PCs but don't want to spend a lot on physical upgrades.
I present to you the AAF DCH Optimus Sound.
Now in a different way!!
This version is based on the generic Microsoft HD Audio Kernel Driver (HdAudio.sys), the one that is already built into Windows. This allows this package to be used on ALL audio chips that are capable of working with the generic driver - regardless of brand.
OFFICIAL Repository for "AAF DCH Optimus Audio" Mods - Based in Microsoft Generic Driver - AlanFinotty/AAFOptimusDCHAudio-Generic
github.com
Latest Version: Based on Microsoft HD Audio Kernel Driver (HdAudio.sys)
Before installing this modified driver, be sure to remove any and all residues from previous Realtek audio drivers or even if there are residues from previous versions of my mods, if they persist. For this you will need the DriverStoreExplorer (by @lostindark). Remove any drivers whose "Provider" is "Realtek", "Dolby", "DTS", "Creative", "A-Volute", "AAF Optimus", etc in the "Sound, Video and Game Controllers", "Extensions", "Software Components" and "Audio Processing Objects" device categories.
Does anybody know how to make creative sound blaster x-fi mb5 work with AAF? I am getting "There is no supported audio device available.", I am using logitech z906 speakers
Does anybody know how to make creative sound blaster x-fi mb5 work with AAF? I am getting "There is no supported audio device available.", I am using logitech z906 speakers
