-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
ATITool 0.26 Release Discussion
- Thread starter W1zzard
- Start date
garsona
New Member
- Joined
- Jan 27, 2008
- Messages
- 6 (0.00/day)
- Location
- Sopot/Bulgaria
| System Name | DL_PC |
|---|---|
| Processor | AMD Athlon 64 3200+ BOX |
| Motherboard | Biostar NF61S Mircro AM2 SE |
| Cooling | Titan 80mm + Spire 50mm |
| Memory | 2x512 MB Corsair VS DDR2-667 |
| Video Card(s) | Sapphire HD2600XT 256MB DDR3 |
| Storage | SEAGATE BARRACUDA 7200.10 250GB SATA2 |
| Display(s) | MAG 786PF 17" |
| Case | ColorsIT unknown |
| Audio Device(s) | Onboard |
| Power Supply | Fortron 300W |
| Software | Microsoft Windows XP SP2 |
sorry , but with latest ati tool 0.27 b4 my sapphire hd2600 xt ddr3 pci-e vc doesn't control the fan , i set 100 percent , but the noise of fan didn't change , and if i wont to decrease the fan rpm get the same thing- the noise are same , the soft say 100 % or other % but all are the same.Sorry 4 my bad enlgish .W1zzard help .
2900 Pro
In Windows XP, My 2900 pro was detected by ATI Tool fine and overclocking worked great.
On Vista 32-bit now (with other different hardware), ATI Tool does not detect the proper speeds of the card, and the sliders are inaccessible. See attachment. Both RivaTuner and ATI Tool are reading the current clocks wrong (Look at what RivaTuner's set to startup with for current clocks..), and again I can't even use the sliders on ati tool.
In Windows XP, My 2900 pro was detected by ATI Tool fine and overclocking worked great.
On Vista 32-bit now (with other different hardware), ATI Tool does not detect the proper speeds of the card, and the sliders are inaccessible. See attachment. Both RivaTuner and ATI Tool are reading the current clocks wrong (Look at what RivaTuner's set to startup with for current clocks..), and again I can't even use the sliders on ati tool.
Attachments
Monkeywoman
New Member
- Joined
- Jan 2, 2008
- Messages
- 157 (0.02/day)
- Location
- Ottawa, Ontario, Canada
| System Name | Monkeywoman |
|---|---|
| Processor | Core2Duo Q6600 3.150 7x450 1.40vCore G0 |
| Motherboard | Asus P5K SE |
| Cooling | Thermalright 120 X for cpu Thermalright Highriser for northbridge |
| Memory | 4Gig OCZ 900Mhz c5 |
| Video Card(s) | ATI Radion HD4850 stock for now |
| Storage | 160gb Seagate master 250gb Seagate 500gb Seagate 500gb Western D |
| Display(s) | LG Flatron 22inch |
| Case | Coolermaster Cosmos S |
| Audio Device(s) | Creative XFI |
| Power Supply | Corsair HX620 |
| Software | Windows Vista x64 Ultimate |
Is ATI tool ever going to reach a final stage i.e 1.0 ? not to rush the developer or anything but it has been 0.26 for the past year and there are a lot of bugs still in the program. whens 0.27 or 0.28 going to be released?
- Joined
- Jun 5, 2008
- Messages
- 107 (0.02/day)
| Processor | INTEL CORE2 DUO E8500 @4.1GHz |
|---|---|
| Motherboard | ASUS RAMPAGE FORMULA X38 |
| Cooling | Tuniq Tower 120 |
| Memory | TRANSCEND PC9600 DDR 1200 |
| Video Card(s) | EVGA 9800 GTX |
| Storage | WD RAPTOR X |
| Display(s) | SAMSUNG Syncmaster 2032bw |
| Case | SILVERSTONE TJ07 |
| Audio Device(s) | SB X-FI XTREMEGAMER FATAL1TY |
| Power Supply | LC-POWER ARKANGEL 850W |
| Software | MS XP PRO SP2 |
is this version good, what's the pros and cos?
cheers
cheers
LowWaterMark
New Member
- Joined
- Jun 14, 2008
- Messages
- 1 (0.00/day)
I need to figure out if my card is compatible with ATITool. It is the small form-factor Gigabyte 8800GT TurboForce 512MB that comes with a Zalman cooler/fan. I apologize, but I've been on the Wiki site and can't find a list of compatible cards.
There are numerous complaints about fan noise and no proprietary way to reduce the RPMs on the Zalman. Take a look at the italicized comments half way down this page of this review.
Same link:
http://aphnetworks.com/reviews/gigabyte_geforce_8800gt_turboforce_512mb/3
Can anyone tell me with certainty whether ATITool can be used to control my fan speed? If not, is there an alternative 3rd party controller that will do the trick? I happened upon the Zalman Fan Mate 2, but I can't figure if there's a 3-pin on the Gigabyte 8800GT TurboForce to rig it to as the Zalman rheostat seems designed for the CPU fan.
Weird problem. Thoughts?
There are numerous complaints about fan noise and no proprietary way to reduce the RPMs on the Zalman. Take a look at the italicized comments half way down this page of this review.
Same link:
http://aphnetworks.com/reviews/gigabyte_geforce_8800gt_turboforce_512mb/3
Can anyone tell me with certainty whether ATITool can be used to control my fan speed? If not, is there an alternative 3rd party controller that will do the trick? I happened upon the Zalman Fan Mate 2, but I can't figure if there's a 3-pin on the Gigabyte 8800GT TurboForce to rig it to as the Zalman rheostat seems designed for the CPU fan.
Weird problem. Thoughts?
Last edited:
alrite guys i have an issue but it doesnt relly have to do with the cooler. anyways iv installed the cooler on my card (took like 3 hrs since i could get teh heatsinks to stick so i not using them until i can get the enzotech stuff) i was using ati tool to check for artifacts and to control my fan speed. anyways when i thought i was turning up the fan speed i accidentall increased my memory clock. and now i cant get any picture up on my monitor. i cant get post, cant get into bios, cant get anything. does anyone know if i cant fix this or did it otoally fuck my card up and need top get a new one? please let me know. thanks and i apologize for asking this here not trying to overtake the thread just looking for some help. so let me know guys thanks alot
Help !
I just installed the AtiTools 0.26 and now it hogs my machine !!
Instead of running like it was supposed to do, it just sit on the system tray (no windows appear when click, just only a "bubble" appears when my cursors hovers on it), and taking up 50% of my CPU time !
I have a dual core CPU, graphic card is with ATI HD 4670 GPU, with 1 GB of GDDR3 RAM on it.
OS is Win XP Pro.
HELP !!
I just installed the AtiTools 0.26 and now it hogs my machine !!
Instead of running like it was supposed to do, it just sit on the system tray (no windows appear when click, just only a "bubble" appears when my cursors hovers on it), and taking up 50% of my CPU time !
I have a dual core CPU, graphic card is with ATI HD 4670 GPU, with 1 GB of GDDR3 RAM on it.
OS is Win XP Pro.
HELP !!
How come the wiki for AtiTools ( @ http://www.techpowerup.com/wiki/doku.php/atitool/start ) is "forbidden" ???
1BadMoJoe
New Member
- Joined
- Dec 30, 2009
- Messages
- 29 (0.01/day)
| System Name | MoonShot |
|---|---|
| Processor | Intel I7 DO/920 |
| Motherboard | ASUS Rampage II (GENE) v2.xx |
| Cooling | Intel...Yeha Baby Its Whats Inside |
| Memory | OCZ3X1600LV2G |
| Video Card(s) | XfX 4870x2 807/991 |
| Storage | Paper and Pencils |
| Display(s) | CRT Fast and High refresh rates |
| Case | Cooler Master |
| Audio Device(s) | Sound Blaster X-FI custom Morels |
| Power Supply | Corsair TX-750 |
| Software | Windows7 Pro 64bit |
| Benchmark Scores | http://hwbot.org/community/submission/952881_1badmojoe_superpi_core_i7_920_8sec_870ms |
Hello
I'm using AtiTool 0.26, Am I the only one whom noticed Level Of Detail regardless if its set at -10.0 or +10.0 does not work. Settings > Driver Tweaks or is there something I'm missing? I am using a Radeon X600se pci-e. Whereas RivaTuner has no option to use this funtion on ATI cards and with Nvidia cards the fuction performs correctly. Again this is about the LOD function for AtiTool
I'm using AtiTool 0.26, Am I the only one whom noticed Level Of Detail regardless if its set at -10.0 or +10.0 does not work. Settings > Driver Tweaks or is there something I'm missing? I am using a Radeon X600se pci-e. Whereas RivaTuner has no option to use this funtion on ATI cards and with Nvidia cards the fuction performs correctly. Again this is about the LOD function for AtiTool