- Joined
- Mar 5, 2007
- Messages
- 1,372 (0.22/day)
- Location
- Chicago, IL
System Name | Stealth 2 Duo Turbine |
---|---|
Processor | Intel e6850 @ 3.8ghz |
Motherboard | Asus Striker Extreme |
Cooling | CoolerMaster V8 Modded With 2 white LED's & 100CFM fan |
Memory | OCZ DDR2 1066_ SLI Black-4GB |
Video Card(s) | 2xMSI 8800GT"s SLI |
Storage | <<HDD For OS>> 2x150GB_Western Digital Raptor_Raid 0. <<HDD For Storage>> 3 x 1TB |
Display(s) | ACER B273HU 27" LCD 2048x1152 |
Case | Apex SuperCase_Custom 7 month Build |
Audio Device(s) | Striker Extreme Add-In Card HD-Audio |
Power Supply | EnerMax INFINITI 720watt |
Software | SE7VEN ULTIMATE 64bit |
Benchmark Scores | 3DMark01=NTTA, 3Dmark06=NTTA 3Dmark_Vantage=NTTA, Core Temp v0.99.5=28C |
Today I'll be modding a Cooler Master V8 with a higher CFM fan & white Leds instead of the Red. First I ordered some part from FrozenCPU
1/4W Metal Film Resistor 10-Pack - 470ohm (12 V DC)
5mm White LED
Black 1/8" Nylon Cable Sleeve
Scythe SY-1225SL12SH SlipStream 120mm Fan 1900RPM 110CFM 37dBA
Next I started to make a led power cable, by soldering the 470ohm Film Resistor on the red wire on a 3 pin connector.
The completed led power cable
Next I drill a hole in the top of the fan to allow the led to insert.
The led power cable attached & ziptied on the bottom.
I did both sides the same then put the new fan in & put the V8 cap back on.
That's it for today,, Next I will install it on my Stealth 2 Duo Rig, I Hope for it to cool better because of the higher CFM fan, the white leds will match my setup.
1/4W Metal Film Resistor 10-Pack - 470ohm (12 V DC)
5mm White LED
Black 1/8" Nylon Cable Sleeve
Scythe SY-1225SL12SH SlipStream 120mm Fan 1900RPM 110CFM 37dBA
Next I started to make a led power cable, by soldering the 470ohm Film Resistor on the red wire on a 3 pin connector.
The completed led power cable
Next I drill a hole in the top of the fan to allow the led to insert.
The led power cable attached & ziptied on the bottom.
I did both sides the same then put the new fan in & put the V8 cap back on.
That's it for today,, Next I will install it on my Stealth 2 Duo Rig, I Hope for it to cool better because of the higher CFM fan, the white leds will match my setup.