Crysis 2 Benchmark TOOL

[Jack Doph]

Yup I realized that only afterwards, like how come this downloaded so quickly... now I realize it was just 2MB

Well.. I guess that means giving a call to Mr John
Um.. Mr John!
Any chance, good sir, that this Benchmark can be utilised/obtained/run WITHOUT the end-user having the game?
To some it might seem futile running a benchmark for a game they already have..

 

[Mr.John]

Jack Doph, wish I could!! As with previous Crysis games you do need the full game in order to benchmark it.

 

[TRIPTEX_CAN]

To make a benchmark independent of the actual game would require access to licensed content from the developer and authorized permission from the developer. This will not happen.

 

[Jack Doph]

I figured as much

 

[HUSKIE]

Here's mine guys

Processor: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz @ 2672 Mhz
CPU ID: Intel64 Family 6 Model 26 Stepping 4
Operating System: Microsoft Windows 7 Ultimate
Physical memory: 5.99 GB
Display adapter: AMD Radeon HD 6900 Series 2048 MB
Video Processor: ATI display adapter (0x6719)
Driver version: Catalyst 11.4 (8.84.3-110226a-114256E-ATI)
Motherboard: ASUS P6T SE Rev 1.xx

==============================================================
TimeDemo Play Started ,Level=alienvessel (Total Frames: 2000, Recorded Time: 102.28s)
Run Finished.
Play Time: 32.52s, Average FPS: 61.50
Min FPS: 4.60 at frame 463, Max FPS: 321.54 at frame 6
Average Tri/Sec: -52829312, Tri/Frame: -858983
Recorded/Played Tris ratio: -0.34
Memory Usage: WorkingSet=1103Mb, PageFile=0Mb, PageFaults=1270
Run Finished.
Play Time: 34.06s, Average FPS: 58.71
Min FPS: 4.60 at frame 463, Max FPS: 321.54 at frame 6
Average Tri/Sec: -41461664, Tri/Frame: -706172
Recorded/Played Tris ratio: -0.83
Memory Usage: WorkingSet=1114Mb, PageFile=0Mb, PageFaults=1277
Run Finished.
Play Time: 34.02s, Average FPS: 58.80
Min FPS: 4.60 at frame 463, Max FPS: 321.54 at frame 6
Average Tri/Sec: -28893820, Tri/Frame: -491414
Recorded/Played Tris ratio: -1.79
Memory Usage: WorkingSet=1123Mb, PageFile=0Mb, PageFaults=1284
AutoTest Play Ended, (3 Runs Performed)
==============================================================

//////////// Summary \\\\\\\\\\\\\

04/16/2011 06:54:16 - Microsoft Windows 7 Ultimate

DirectX 9.0c EXTREME 3X @ Map: AlienVessel @ 1920 x 1080 AA EdgeAA
==> Framerate [ Min: 4.60 Max: 321.54 Avg: 58.76 ]

 

[Ghostleader]

Thanks, I think I'll take your suggestion.

Edit: I need to know the map name to load it directly (e.g. AlienVessel, CentralPark, TimesSquare, etc.)

Yeah, you guess right

I don't have Warhead installed right now, but I'll take a look onto that map, maybe a future update to the benchmark tool could bring new timedemos and other things too.

Awesome work you have done with those benchmarks tool


The map name are "convoy" and you can start the benchmark right after that Alcatraz have mounted the vehicle and stop it right after the alien tentacle have hit the vehicle, it´s about 3 minutes long.

Start bench

Stop bench

The map for Warhead are the "train" and it´s much apprecieted if you could do a new timedemo


Btw, is it difficult to do a timedemo? how do I record a game sequence and use it as a benchmark?

I have tried what´s described in this thread but I want to record my own timedemo.

 

[btarunr]

Um.. I just now wanted to play Crysis 2, and .. had to re-install it, because it keeps launching the benchmark only, even after I physically removed all traces of the benchmark :/
Is this an oddity unique to my system?

Just delete the autoexec.cfg from the game's program folder each time you want to play the game. Running the benchmark will create a new one.

 

[Mr.John]

Ghostleader, I couldn't record a timedemo for Convoy due to some limitations imposed by AI during timedemo recording... sorry.

I've added 3 custom timedemos recorded at Central Park, Downtown and Times Square. The default timedemos have been removed.


Updates
======

0.15 - 15/04/2011
- New installer.
- New timedemos.
- Removed unavailable AA modes (8xQ, etc.)
- The program now checks for newer version when it's started.

0.14 - 14/04/2011
- Savegames created during the benchmark are removed after the test finishes.

0.13 - 14/04/2011
- Autoexec.cfg is kept even it didn't existed before. The program now deletes the file to avoid the game enter benchmark mode the next time it's opened.

0.12 - 13/04/2011
- AA modes changed to reflect changes from Crysis/Crysis Warhead.

0.11 - 13/04/2011
- Program title changed.
- Fixed game config path.

0.10 - 13/04/2011
- First release.


Download from the same link

 

[Ghostleader]

@Mr.John

It´s okey, no need to sorry, not your fault.

Nice to have some real timedemo instead of those Crytek ones.


Btw: some people have problems with that when they going to play the game the benchmark starts.

The problem was taken care of in 0.13 but for some it´s still there, they use the 0.14 and a Steam version of Crysis 2, don´t know if they have patched it or not.

I had no problem with that with either 0.14 or 0.15, I run a retail version

 

[Ghostleader]

@Mr.John

I got issue with Crossfire and SLI, running one card is fine but mega glitches/flickering with Crossfire, same issue with Nvidia, single card just fine, mega glitches/flickering with SLI.


Then it seems like there´s still problem with the "autoexec.cfg" and the Steam version and if people remove it, it mess up the savefiles some how.

Can you look into this issues.

 

[paulharrison123]

Ouch,

My results less than Huskies, and i have a 6990 - what do you have huskie? - EDIT : just realised, different map and resolution!!!

Processor: AMD Phenom(tm) II X6 1090T Processor @ 4214 Mhz
CPU ID: AMD64 Family 16 Model 10 Stepping 0
Operating System: Microsoft Windows 7 Ultimate
Physical memory: 4.00 GB
Display adapter: AMD Radeon HD 6990 2048 MB
Video Processor: ATI display adapter (0x671D)
Driver version: Catalyst 11.4 (8.84.2-110321a-115519E)
Motherboard: ASUS Crosshair IV Formula Rev 1.xx

==============================================================
TimeDemo Play Started ,Level=CentralPark (Total Frames: 5000, Recorded Time: 87.14s)
Run Finished.
Play Time: 94.25s, Average FPS: 53.05
Min FPS: 8.87 at frame 1928, Max FPS: 456.62 at frame 3052
Average Tri/Sec: 14438102, Tri/Frame: 272154
Recorded/Played Tris ratio: -0.91
Memory Usage: WorkingSet=1153Mb, PageFile=0Mb, PageFaults=1266
Run Finished.
Play Time: 99.59s, Average FPS: 50.21
Min FPS: 8.87 at frame 1928, Max FPS: 456.62 at frame 3052
Average Tri/Sec: -4222967, Tri/Frame: -84112
Recorded/Played Tris ratio: -4.33
Memory Usage: WorkingSet=1157Mb, PageFile=0Mb, PageFaults=1273
Run Finished.
Play Time: 101.51s, Average FPS: 49.26
Min FPS: 8.87 at frame 1928, Max FPS: 456.62 at frame 3052
Average Tri/Sec: -15276519, Tri/Frame: -310129
Recorded/Played Tris ratio: -0.38
Memory Usage: WorkingSet=1184Mb, PageFile=0Mb, PageFaults=1299
AutoTest Play Ended, (3 Runs Performed)
==============================================================

//////////// Summary \\\\\\\\\\\\\

04/22/2011 09:49:17 - Microsoft Windows 7 Ultimate

DirectX 9.0c EXTREME 3X @ Map: CentralPark @ Edge AA 1920 x 1200 AA EdgeAA
==> Framerate [ Min: 8.87 Max: 456.62 Avg: 49.74 ]

 

[guitar_man_94]

Sorry to revive this thread but the 3 timedemos aren't working for me now even though they worked a few days ago. When I run the benchmark it loads the correct map but the campaign just runs normally and it doesn't show what the fps is etc.

 

[ThorAxe]

A bit OT:

@Mr John

Is there any way to add a custom resolution to the original Crysis Benchmark Tool? I want to run it at 2560x1440.

Thanks.

 

[Ghostleader]

New version of the Crysis 2 Benchmark Tool is availible now, it requires the latest 1.9 patch and it works quite good.

Edit: Source and download link


Here´s a bench with my GTX 580

 

[erixx]

funny while lunching i tried to pass one of the last levels, I had it figured then lost it and had to restart the whole damn level... so now at least i can 'play' benchmark while i am angry at the spaceinvading insects....

 

[erixx]

newest version and it keeps saying on launch of the test "could not acces saved games......." but than it stays in running mode with an 'abort' button that doesnt work!....

 

[Mr.John]

newest version and it keeps saying on launch of the test "could not acces saved games......." but than it stays in running mode with an 'abort' button that doesnt work!....

That happens when you have "Documents" folder changed to another place. It's still pending fix.

 

[erixx]

yeah, of course, i change documents (and MANY more) to another folder (disc that is). I have 1TB of documents and don't want it to be on the system drive.

Thanks!!!! Kisses! Cheers!

 

[Gabkicks]

man, my 6950 loses to a 460 in dx11 w/ high res @ 1080p lol. come on amd/crytek. halp us!

 

[alexsubri]

man, my 6950 loses to a 460 in dx11 w/ high res @ 1080p lol. come on amd/crytek. halp us!

thats common though. Crytek are sellouts to nVidia. Better coding for GPU = Better results

 

[HammerON]

That happens when you have "Documents" folder changed to another place. It's still pending fix.

So I take it that I am having the same problem:

Even though the installation path shows "E:" the error box is looking in "C:"...

 

[Melvis]

I have a different error, mine loads up the benchmark then it gets to the screen where it says press any button to begin, then it just comes up saying crysis 2 has stopped working, then crashes back to desktop, any idea's what this means?

 

[HammerON]

Got it to work: