- Joined
- Apr 5, 2005
- Messages
- 6,770 (0.98/day)
- Location
- Republic of Asia (a.k.a Irvine), CA
System Name | --- |
---|---|
Processor | FX 8350 @ 4.00 Ghz with 1.28v |
Motherboard | Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x |
Cooling | Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan |
Memory | Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB |
Video Card(s) | Asus R9 290 OC @ GPU - 1050, MEM - 1300 |
Storage | Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games |
Display(s) | 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23" |
Case | AeroCool XPredator X3 |
Audio Device(s) | Built-in Realtek |
Power Supply | Corsair HX1000 Modular |
Software | Windows 10 Pro 64 bit |
im running c & q cpu run at 800mhz 1.35volt.
ive done reseat cpu no change,got to say this cpu runs very smooth.
bios 1303 according to cpuz ,swear i put on 1602.
gonna get new cpu water block anyway(after check puump).
just need a new dx11 gpu and sorted.
something is wrong. at 800mhz with cnq the voltage should be .98 v. After updating the bios did u clear the cmos? if not unplug from the wall outlet then clear the cmos with the jumper and check.