Help overclocking E5200

[JrRacinFan]

That's easy to do, just jump the FSB to 266 with a multi of 12.5 from the stock 200, then lower the ram divider to match your ram's rated speed. All voltages won't need to be touched.

Dram frequency under jumperfree configuration
http://img.techpowerup.org/110819/Capture104.jpg

Use 667.

what shud i adjust in BIOS if i want to overclock my e5200 to 3.3 to 3.4 ghz...the voltage,etc.
is it possible? i used 450 power supply

Again, voltages should not need adjusted.

 

[JustinX]

Again, voltages should not need adjusted.

my pc wont post if i overclock more than 3.2 ghz thats y i'm asking i there will be adjustments in my voltages

 

[JrRacinFan]

my pc wont post if i overclock more than 3.2 ghz thats y i'm asking i there will be adjustments in my voltages

ok well push core voltage to 1.4v and then try tweaking it down.

 

[JustinX]

ok well push core voltage to 1.4v and then try tweaking it down.

sorry to have u a hard time...in my manual does the "VTT_CPU Over Voltage" in jumperfree configuration my core voltage? what will i do to the ram?