- Joined
- Aug 21, 2010
- Messages
- 105 (0.02/day)
- Location
- Seattle,WA
System Name | RemDiablo |
---|---|
Processor | I7 8700k |
Motherboard | ASUS Maximus X Hero |
Cooling | Custom watercooling |
Memory | G.Skill ripjaw |
Video Card(s) | Gigabyte Aorus 1080Ti watercooled |
Storage | SSD Samsung 1TB (boot),Seagate 4TB 7200 RPM storage |
Display(s) | 3x Asus VG248QE 24" monitors |
Case | Thermaltake x9 |
Audio Device(s) | Asus Supreme FX (on board audio) |
Power Supply | Corsair 1200W |
Mouse | logitech |
Software | WIN 10 Ultimate 64-bit |
Benchmark Scores | No score at this time |
Well I have the P5Q pro turbo MB . My settings are much different than you have .
First off I can get 4.0GHz ( 445 FSB ) I have also been able to hit 4.3GHz But need my tech water block when I do this and much more Vcore as well 1.5V . To do this I had to set the NB voltage up ( way up ) to 1.4v the CPU voltage is on Auto ( 1.3V ) I set the VTT and PLL up one setting ( I can not get stability unless I set these up one notch ) . RAM is on auto , not into messing with the RAM as well I suck at it .
As for flashing your bios to the Pro or turbo I do not know if that would work . Again I do not mess with bios flashing as I suck at that too . :shadedshu . You may have just hit the wall with your MB and getting a pro or pro turbo maybe your only real recourse to solving this problem . It is hard to say . I would like to point out to you that the SE MB is really not designed with the over clocker in mind it is more of a rock solid stock speed MB . In any case to get you started try taking the NB voltage up some take the CPU voltage up some ( I would caution you going over 1.45v unless you have really good cooling . ) and if that still does not work then you can try taking the RAM voltage up some ( go past the rated voltage ) say if it is 1.9V stock take it to 2.0 volts or 2.1 ( this may or may not damage the RAM so be very careful ( I have never had any problems with taking the RAM I have past the rated voltage but do not have to with the Kingston RAM I have . ) . Try tinkering around some but be very careful it takes time and lots of patients to over clock .
You really could get better results though if you get the Pro or Pro turbo MB .
OH also one more thing , I know you are new here and we all welcome you and look forward to helping you in any way that we can , But please try not to triple post so much .
Good luck and welcome to the best PLACE for tech help and information on the planet !!!
You think 1.5v or 1.53 it's gonna be O.K. with Corsair H50?? to get 3.8 or 3.9 ghz ??? I do not see high temp at all on my system ,even when I rise voltages up to 1.6,(I Know it's dangerous)the highest I've got was 54 c under 100% load ,but only for 3 min,then I got BSOD, and my system temp never go over 30 c.if you check my system spec.So as far as i know cooling it's not my problem,for my 5850 I have aftermarket cooler.,for CPU aftermarket as well. case HAF X very COOL.I will try 450 FSB ,1.48 vcore in Bios so that is gonna give me 1.39-1.40 in CPU-Z is that O.K.? And I have multiplayer 6-8.5 max
Last edited: