• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

How To: Enable SLI on pre-i7/i5 hardware

So I decided to delete the "Serious SAM HD" Profile from the list. I used nvidiaIspector for that.
Now it starts in windowed mode!
Click to expand...

Simply add the game exe from nvidia control panel game list so you have the profile there.

switch between full screen and windowed mode - ALT + ENTER
 
johnspack said:
Odd, maybe a glitch with quad sli? I have also run Serious Sam HD in sli, it works perfect for me. Try setting it down to dual sli, (if you can, I only have 2 cards, so I don't know what quad does) the game really doesn't need more than that.
Click to expand...

It happens with all games not only Serious Sam HD. I have tried LOTRO, CODMWF, Serious Sam, Crysis, Fallout New Vegas.
Dual SLI (One GTX2 295) works fine.
 
Has anyone managed to get 2d surround working on a pair of single pcb gtx 295's? Ive tried both patches and multiple driver revisions, every time a surround resolution is applied the system locks up with 3 black screens. All 3 of my monitors support the same max res of 1920x1080.


Specs are

asus p5q-e
2 gtx 295's
coolermaster realpower 850 modular
q6600@3.4
4 gigs of kingston pc1066 ram.
 
cant get slipatch 0.9/0.91 to work with my

Gigabyte GA-P55 USB3 and Zotac 460 :cry:

any little simple trick to get it work ? :toast:

(using forceware 260.99) on a clean win7 x64 installation


edit: i forgot to mention, got blue screen and then monitor go standby when slipatch are enable
 
Last edited:
Splat- said:
cant get slipatch 0.9/0.91 to work with my

Gigabyte GA-P55 USB3 and Zotac 460 :cry:

any little simple trick to get it work ? :toast:

(using forceware 260.99) on a clean win7 x64 installation


edit: i forgot to mention, got blue screen and then monitor go standby when slipatch are enable
Click to expand...

Yup - exactly what happened to me before I starting using Administrator mode
 
I am back Anatoly,

Got your email back the other day. I sold last Extreme mother board, but I missed it so much I bought another one.

We have SLi Hack working, PNY GTX 580s and ASUS Crosshair IV Extreme, did nothing different than last time, just tried it for shits and giggles.

One thing is different, I have a SLi cable from my EVGA 770 Classy, I used. Looks like that could have been all it was.

SLi-Hack 0.9B, latest, with drivers 263.09 from nVidia.

185398d1292694225-official-asus-crosshair-iv-formula-extreme-temp.png
 
Last edited:
anatolymik said:
257.12 for example. did you move cards?
Click to expand...

Hi,

Just tried now as I was away from home and main machine.

Downgraded to 257.12
Moved cards so they sit next to each other now (was using PCI-E 16x slots 0 and 2 out of the 4 available, now is 0 and 1 (make it 1 and 3, moved to 2 and 3 if they're numbered the other way round).
Still no luck (both cards seen and working, no sli but physx configuration shows in control panel, getting some blue screens in the windows SLI patch boot that I don't get in the regular boot)

Last thing I could try would be to change the SLI bridge. Got a flexible one that might be defective, will try to see if I can get a rigid one of correct size on the web...
 
anatolymik said:
New version. Link below. Please test
Click to expand...

a special thanks from me anatolymik! :)
i just saw yours in the about of the patch!
i also wish you a happy new year,and a great Christmas, may only good things happen to you!:)
 
Thanks SO MUCH for the new version Anatolymik!!! :roll:

Cheers, Merry Christmas and Happy New Year!!! :toast:

Thanks once again for all your HARD and GREAT work!!! :respect:
 
Thanks once again Anatolymik.

Sorry for the ubber noob question, but what is the recommended method for updating to v1.0?

Thanks!!!
 
Hi Anatolymik,

Here's a wacky thought;

Can you demonstrate that the NVidia driver code deliberately crashes the system if it detects a non 'official' SLI motherboard?

Don't know about elsewhere in the world but here in the UK we have very strict laws about such things. If NV were shown to be deliberately causing crashes, that would be illegal. Moreover if it can be 'formally' demonstrated that SLI works correctly on non-certified motherboards (but for the protection) then sabotaging a system because you've detected a competitor's product, falls foul of competition regulations as well.

All well and good in theory but it would hinge on being able to demonstrate, beyond reasonable doubt, that there is malicious code present in the driver which serves no other purpose.

Think I had a 'brain fart' this morning
 
anatolymik said:
enough to push Update button and reboot
Click to expand...

Hi Anatolymik,

I did an update from 0.91. It said, 'Update Successful' but none of the version information changed so I'm going to remove it and do a manual reinstall. No big issue, just an FYI.

Thanks again.
 
aXeL_UK said:
Hi Anatolymik,

I did an update from 0.91. It said, 'Update Successful' but none of the version information changed so I'm going to remove it and do a manual reinstall. No big issue, just an FYI.

Thanks again.
Click to expand...

you have updated to 1.0. installer doesn't show current installed version. i'll make it in next version of installer
 
Last edited:
Tried 1.01 patch on fresh installed 64 bit win 7 on my Z800, same problem as before!
When you loading the SLI patched OS from boot menu computer restarts after windows logo with no error.
Any ideas?

Sposibo:banghead:
 
johnsmm said:
Tried 1.01 patch on fresh installed 64 bit win 7 on my Z800, same problem as before!
When you loading the SLI patched OS from boot menu computer restarts after windows logo with no error.
Any ideas?

Sposibo:banghead:
Click to expand...

what you see on display. you see windows loading bar? or you immediate got restart?

1.01 it's a version of installer. not patch
 
Hi Anatolymik,

Just got my first crash on '1.0 Final', the old issue whereby the systems freezes till I do a power-off reset. Only been running it for a few minutes, playing Oblivion as usual. Going to give it another try. If it does it again this evening then I'll regress back to 0.91 to see if that clears it up.

BTW I note from the other post that there is a 1.01 but I DL'd a '1.0 Final' from your sig. Is there a direct link to this? I assume it's newer than 1.0 Final.

Thanks.
 
aXeL_UK said:
Hi Anatolymik,

Just got my first crash on '1.0 Final', the old issue whereby the systems freezes till I do a power-off reset. Only been running it for a few minutes, playing Oblivion as usual. Going to give it another try. If it does it again this evening then I'll regress back to 0.91 to see if that clears it up.

BTW I note from the other post that there is a 1.01 but I DL'd a '1.0 Final' from your sig. Is there a direct link to this? I assume it's newer than 1.0 Final.

Thanks.
Click to expand...

on 0.91b did you have that problems?
 
Ok, on reboot I couldn't get to the login screen, the system froze again so I booted into safe mode and uninstalled the patch. Still couldn't boot back into normal mode. Going to have to try a complete driver re-install.

Could be just a co-incidence but two crashes in 5 minutes on patch 1.0, following a week of stability on 0.91 (using the same 260.99 drivers) suggests to me there's an issue with 1.0 Final.

A

...Wow - this time the crash was so bad it corrupted the driver so that the installation disappeared from Control Panel. I had to delete the directories manually, uninstall the cards from Device Manager and then run Driver Sweeper. Don't know if it's enough to bring the system back up yet, trying now.
 
Last edited:
aXeL_UK said:
Ok, on reboot I couldn't get to the login screen, the system froze again so I booted into safe mode and uninstalled the patch. Still couldn't boot back into normal mode. Going to have to try a complete driver re-install.

Could be just a co-incidence but two crashes in 5 minutes on patch 1.0, following a week of stability on 0.91 (using the same 260.99 drivers) suggests to me there's an issue with 1.0 Final.

A
Click to expand...

use safe mode to boot and uninstall driver
 
You must log in or register to reply here.
Back
Top