MKmods
Case Mod Guru
- Joined
- Feb 26, 2008
- Messages
- 5,697 (0.96/day)
- Location
- Nevada
System Name | Crossflow III |
---|---|
Processor | AMD 965 (4.04Ghz) |
Motherboard | Asus Crosshair III |
Cooling | Air |
Memory | 4 gigs Mushkin 7-7-7-20@1T |
Video Card(s) | single 9800GT |
Storage | Raptor 150's in Raid0 |
Display(s) | LG Flatron 24" |
Case | Custom |
Audio Device(s) | AuzenTech X-Raider W/OP637 |
Power Supply | Custom modded Corsair 750HX |
Software | Win 7 64/Solaris Utility |
Benchmark Scores | 3DMark06--21963 so far |
LOL, nothing wrong with 775....now if you had said you were still using a Pent1 thats a different story...
I was messing around with the 9800GTs and coolers.
Battle Axe- (poor, only 2 of the 4 tubes make contact with the GPU)
AC Accelero S2- (better but sticks up WAY too high) I am gonna cut it down to be the height of the video card later on. But I really think its more for the 9600 and below cards.
Zalman VF900- (6C warmer than the stock Calibre coolers set at 25%, 10C warmer than the calibre coolers set at 100%) So serious suckage on 9800 and up cards (also may be fne on 9600/9500 cards.
I just received a bunch of molex ends so this week I will be redesigning the PS.
I was messing around with the 9800GTs and coolers.
Battle Axe- (poor, only 2 of the 4 tubes make contact with the GPU)
AC Accelero S2- (better but sticks up WAY too high) I am gonna cut it down to be the height of the video card later on. But I really think its more for the 9600 and below cards.
Zalman VF900- (6C warmer than the stock Calibre coolers set at 25%, 10C warmer than the calibre coolers set at 100%) So serious suckage on 9800 and up cards (also may be fne on 9600/9500 cards.
I just received a bunch of molex ends so this week I will be redesigning the PS.