• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Missing Bios with ComboAm4v2PI 1.2.0.7 for MSI B450 boards

In cpu-z benchmark i get a max temp of 72C and i was scoring 510-515 single and 5500multi and now its like 507 single and 5400-5450 multi, temp can be a problem but i dont think the room temps are higher than before , im keeping an undervolt of 0,25 on the cpu.
I'm undervolted to 1.25625, getting 515-520 single and 4410 multi. I've had better results when it was cool in the morning.
 
  • Like
Reactions: izy
I'm undervolted to 1.25625, getting 515-520 single and 4410 multi. I've had better results when it was cool in the morning.
I am using an offset for undervolting and yeah i think my single should be 515+ as it was before with some older BIOS, PBO doesnt help at all so i dont have it enabled. The problem can be with the temp or maybe my CPU doesnt like the increased FCLK .
Edit: PPT and EDC are 100% during the benchmark , ill have to tweak them a bit and see if that helps. (maybe they changed some default voltages in this BIOS version and my offset has to be higher or lower)
PPT 88W , EDC 90A
 
Last edited:
I am using an offset for undervolting and yeah i think my single should be 515+ as it was before with some older BIOS, PBO doesnt help at all so i dont have it enabled. The problem can be with the temp or maybe my CPU doesnt like the increased FCLK .
Jinxed me lol.png
Jinxed me, lmao.
 
Wait until Monday and Tuesday... I might give the computer a rest and watch some TV. No benchmark is useful. 35C/37C
 
  • Like
Reactions: izy
I enabled PBO , +50 autoOC , scalar 5x , -0.075 vcore offset , EDC 75 A (rest of the settings you can see them in the picture) and it seems i got my performance back but with my old settings without PBO the performance was worse with this BIOS , temps could be a problem but im pretty sure the stock performance was lower.
Untitled4.png
 
I dont like the fact he MSI changed the default bootup option to UEFI and did not leave it on CSM.

How do they expect people with older GPUs to go into the BIOS and change that!

Anyway rant over. Im running 1.2.0.7 on a B450M Mortar Max and its been problem free and performance seems better than 1.2.0.6C
It's a requirement for windows 11
To be honest, apart from some odd cards like the AMD RX 5x0 cards that had missing UEFI for no real reason, any card old enough to not have UEFI support is likely too old to be officially compatible with the platform.

Nvidias 600 GTX and newer have UEFI (10 years old)
AMD's 7750 and above had UEFI (Also 10 years old, both from 2012)
 
Please be careful when updating MSI similar model motherboard bios.
Because the BIOS chips on the motherboard such as B450 TOMAHAWK are not ordinary, even if you plug them into Eeprom, they can burn out immediately.
An interesting chip with a 1.8v Vcc leg.
WINBOND W25Q128 Flash Memory Chip 128Mbit 16MB
Here "@Assimilator" has touched on this subject a bit, but no one has even taken it into account.
Finding this chip may pose a problem.
 
It's a requirement for windows 11
To be honest, apart from some odd cards like the AMD RX 5x0 cards that had missing UEFI for no real reason, any card old enough to not have UEFI support is likely too old to be officially compatible with the platform.

Nvidias 600 GTX and newer have UEFI (10 years old)
AMD's 7750 and above had UEFI (Also 10 years old, both from 2012)
You can update GOP for older cards and its pretty simple.
 
New stable bios (last one was BETA)

Removed Bios:
B450 TOMAHAWK MAX (MS-7C02) V3.E BIOS Release
2. This BIOS fixes the following problem of the previous version:
- Update to AGESA ComboAm4v2PI 1.2.0.7.
- Change the default setting of Secure Boot.
Release Date: 2022-06-17

BETA bios (also removed):
B450 TOMAHAWK MAX (MS-7C02) V3.F1 BIOS Release - (BETA)
2. This BIOS fixes the following problem of the previous version:
- Update to AGESA ComboAm4v2PI 1.2.0.7.
- Change the default setting of Secure Boot.
Release Date: 2022-07-05

New BIOS:
B450 TOMAHAWK MAX (MS-7C02) V3.F BIOS Release (V3.F0)
2. This BIOS fixes the following problem of the previous version:
- Update to AGESA ComboAm4v2PI 1.2.0.7.
- Change the default setting of Secure Boot.
Release Date: 2022-08-12
 
Last edited:
Just curious, if you don’t have X3D, why would you want 1207?

Edit:

Or 1206 for that matter.
 
Just curious, if you don’t have X3D, why would you want 1207?

Edit:

Or 1206 for that matter.
Opened the topic for who has one or wants to buy one + ram oc can be better with a newer bios, some people were complaining about stability with the bios that MSI removed even it was released as stable version.
 
Last edited:
I downloaded it 2 days ago to get me off that beta bios. Not tried ocing anything since though.
 
  • Like
Reactions: izy
I downloaded it 2 days ago to get me off that beta bios. Not tried ocing anything since though.
I think its the same as the BETA and they only removed the "BETA" from the description. If anything changed (better OC / RAM OC or something) let me know , im lazy to reconfigure the BIOS at the moment.
 
Eww Stock?

I feel like I don't know you anymore :confused:
Sorry, my ram is OC'd but I've not tried anything else at all. But I just can't be assed at the moment. I have an endless hankering for a 6800XT or 6750XT with a free Ducky keyboard, but the funds are not at that level at the moment.
 
Just curious, if you don’t have X3D, why would you want 1207?

Edit:

Or 1206 for that matter.
TPM fix, mostly

Despite breaking my curve optimiser, these new BIOSes run a lot colder for me, so stock gets a performance boost (not that i'm on stock)
 
Back
Top