• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

New build problems

Its still running right now and formating the vr.
 
I hope it works.Its about 3/4 way done now.
The RC TweakIt tool is very cool.
 
That was the longest it has been on.
Going to see if it works now.
 
Nope just bsod again
 
jlewis02 said:
Nope just bsod again
Click to expand...

There is some thing going on with that HDD . Try to reformat it 2 times then see . I still think it is just the HDD .
 
jlewis02 said:
Nope just bsod again
Click to expand...

Try it in a different system and see if it bsod's there. If not, then the drive is fine, it just won't play with your new hardware.
 
I dont have a defferent system to try it on anymore.
 
Some motherboards are fussy about what ram they like, I still think its the hardrive though probably damaged sector halting the instalation. Try another HDD.
 
Nitro-Max said:
Some motherboards are fussy about what ram they like, I still think its the hardrive though probably damaged sector halting the instalation. Try another HDD.
Click to expand...

He already tried and they worked. Hence why I'm thinking the drive doesn't want to play with the hardware.
And also basing this on the fact he has used the drive previously.

jlewis02 said:
Yes and I can boot to both hdd but the raptor bsod everytime.
Click to expand...
 
I changed where it was pluged in on the board from a normal sata to the faster ones that are 6gb/s maybe just maybe

No go

Going to format the other drive and use it.
 
Shouldnt really cause issues, sata 1 2 3 are all same connection type and should run as normal unless you have a 6gb/s hardrive and cable to allow it to run at those speeds, But i guess you could try.
 
Just go with what works man RIP raptor. :(
 
If this drive works im going to shoot the raptor with my 44mag
 
It just crashed now.POS i7 system
 
danm man that vr just wont budge....rma taat shit and get a diff hdd from wd or go with seagate they got those cheetah hdd that are 10k rpm too..keep us all updated
 
Well go back to basics bare minimum one drive one ram stick etc see if the instal completes and you get into windows then add the other hardware one by one, till you get bsod. And then you'll find your problem.

Have you checked the ram is compatable with the motherboard? some board are fussy with certain ram.

*EDIT* I hate computers as much as i love them!!

well goodluck im off to bed its late here in the uk.
 
The ram is in the compatable list in the book and on there site.
 
are ALL fans spinning when you get bsod? including gpu fan?
 
highly doubt it, as long as ur 100% sure the cpu and the cpu fan is seated properly, i dont think cpu is the problem. you have a great mb, did you try the reset and start features?
 
Yes
Im going to bed piss on this thing.
 
You must log in or register to reply here.
Back
Top