• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

New build problems

You really don't need to be increasing random volts unless you know what they are for. That's a good way to get a RMA

what vlts does your ram call for? what CL are they at and what freq?
 
Ram is 1600mhz 8-8-8-24@1.65v

Going back to one stick of ram.
 
You really don't need to be increasing random volts unless you know what they are for. That's a good way to get a RMA

what vlts does your ram call for? what CL are they at and what freq?

True . this just sounds like maybe some thing is terribly wrong and it could be RAM and even worse the MB maybe f'ed !
 
QPI is cpu vtt on this board.
Im going to put it at 1.4v and see how long it lasts.
 
QPI is cpu vtt on this board.
Im going to put it at 1.4v and see how long it lasts.

if you say so;) got a link to where you got that info?
 
Have you tried to load default settings? It might "dumb down" your ram but it might get you going
 
QPI/DRAM Core Voltage = CPU VTT and DRAM Bus Voltage = VDIMM memory voltage

From your link
 
Maybe that is the problem ? Take the VDIMM to what the max rated for the RAM chips is and see if that helps . Seems like you have some bad RAM there bub .
 
The ram is at 1.65v already
 
The ram is at 1.65v already

Man well good luck I do not know what it is that is causing this . RAM or MB it is one of these . :confused:
 
QPI voltage is at 1.50v in bios 1.45v under RC TweakIt
 
before you blow up your stuff could you load default setting and tell me what your ram is at then try to run it that way
 
You have some Vdrop going on but one thing what is this RC tweak it and how are you able to get into that ? Is that part of the bios ?
 
RC TweakIt is a link from the motherboard to a laptop via a usb cable.
I am having the sam problems alot of people have with3x2gb sticks needs alot of QPI voltage.
 
RC TweakIt is a link from the motherboard to a laptop via a usb cable.
I am having the same problems a lot of people have with3x2gb sticks needs alot of QPI voltage.

Maybe you need some new or newer RAM ? This is what I would do first ( Get new RAM ) then if that did not pan out I would RMA the MB .
 
Found this
CORSAIR is happy with max DRAM Voltage of 1.66v and max QPI Voltage of 1.70v anything above those numbers they don't recommand.
 
Found this
CORSAIR is happy with max DRAM Voltage of 1.66v and max QPI Voltage of 1.70v anything above those numbers they don't recommend.

give it a try ?
 
Put that through it your not listening to anything else! Good Luck
 
Im trying 1.65v ram and 1.64v QPI

Found this also.
try to stay within a vtt-vdimm difference of .225-.310V with these great Dominators
 
Im trying 1.65v ram and 1.64v QPI

Found this also.
try to stay within a vtt-vdimm difference of .225-.310V with these great Dominators

Did it work ? If not take ever thing back to stock settings and try that . If that don't work get some new RAM if that fails then get a New MB .
 
Im trying 1.65v ram and 1.64v QPI

Found this also.
try to stay within a vtt-vdimm difference of .225-.310V with these great Dominators

Correct me if i'm wrong or if all my posts are invisible to you, if your having a problem your answer is to max out the voltage?
 
Correct me if i'm wrong or if all my posts are invisible to you, if your having a problem your answer is to max out the voltage?

LOL . The RAM is fucked and he is trying to make the smoke rise up to tell him so . :shadedshu
 
LOL . The RAM is fucked and he is trying to make the smoke rise up to tell him so . :shadedshu

What's sad is that i'm pretty positive he could get the rig going if he just puts the ram down to 1333... but i'm done with this thread before he earns me an infraction:rolleyes:
 
Back
Top