• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

New build problems

lol im out to bed, goodluck man, dont give up!
 
I keep getting your overclock has failed and its all stock still.
 
Anyone have anymore ideas?
 
124 is a hardware error, do the step by step of everything. 1 stick of ram at a time, then with a backup gpu, then the hd's etc..

I highly doubt its the mobo but if it crashes no matter the hardware config then MAAAYBE its the mobo
 
Had this same thing happen when I added a new SSD. It would boot part when then crash very suddenly. I solved the problem by setting up the SSD first then adding the other regular HDD afterward. So it did not mean something was broke.....just was not setup to the way the hardware would have liked. :laugh: Hopefully you figure out your woes here. Probably something small that is easily overlooked but I will guess the HDD as well here. Your symptoms mimicked my own.
 
I have tryed the hdd and one ram stick installed.
I have two hdd's and they are both doing the samething.
 
I am out of ideas.
I updated the bios and still the same.
 
I remember a guy who built a computer and forgot to put the stand offs for the motherboard and wondered why the computer kept shutting off. I am thinking you just overlooked something. Maybe it's a BIOS setting or something not set right. But keep at it and eventually you will figure it out. There are simply too many variables as to why you get a BSOD trying to boot up.
 
Im going to RMA this POS monday so I got two days to figure it out.
 
Im going to RMA this POS monday so I got two days to figure it out.

Sorry to hear that you can not get it figured out . Yeah I would RMA ALL OF IT !
 
The cpu and ram are used from a guy on here.
The board I got from newegg new.
 
0124 = not the right VTT for the memory in my book;)
 
What should it be?
 
Votages are
CPU-1.20v
DRAM-1.65v
IOH-1.15v
ICH-1.11v
QPI-1.26v
CPU PLL-1.81v
IOH PCIE-1.50v
 
Votages are
CPU-1.20v
DRAM-1.65v
IOH-1.15v
ICH-1.11v
QPI-1.26v
CPU PLL-1.81v
IOH PCIE-1.50v

I tell you what ; I will trade you mine for yours !
 
0124 = not the right VTT for the memory in my book;)

You sir are awsome its still working so far I guess the QPI is what was the problem its at 1.28v now.

Got almost all the drivers installed on my VR drive.
 
Well it was working just crashed again.
 
Its at 1.35 in the bios and its showing 1.31v in RC TweakIt
 
Its at 1.35 in the bios and its showing 1.31v in RC TweakIt

Take it to 1.4 then ! or trade that POS to me for my CPU , MB and RAM . :roll:
 
I thought QPI and VTT were separate entities on X58. I would be looking at ICH I "think", not possitive.
 
Ok ICH and IOH are at 1.20v now maybe that will be better.
 
Take it to 1.4 then ! or trade that POS to me for my CPU , MB and RAM . :roll:

what are you basing your suggestions from? Up'ing the voltage is not a cure all

QPI is the link between your NB and CPU like HT on an Asus

I really think your ram is causing the issue...
 
Upping the ICH and IOH just made it crash faster.
 
Back
Top