OCZ Cryo-Z Phase Change Unit New Information and Details

Megasty · Apr 11, 2008

Darnit, I just put my water back in too. I'll definitely be up for this but if it don't shut off with your pc within a reasonable amount of time more than just your cpu will be iced :toast:

jbunch07 · Apr 11, 2008

Megasty said:
Darnit, I just put my water back in too. I'll definitely be up for this but if it don't shut off with your pc within a reasonable amount of time more than just your cpu will be iced

thats what i said....

PVTCaboose1337 · Apr 11, 2008

From the review I just read, the build on that is a piece of junk. A very cool piece of junk though.

DaMulta · Apr 11, 2008

PVTCaboose1337 said:
From the review I just read, the build on that is a piece of junk. A very cool piece of junk though.

299.99 verses 899.99 for the same thing.

So they cut corners to keep the cost down....no big deal IMO.

Cryo-Z initial notes
http://www.xtremesystems.org/forums/showthread.php?t=184072

My first setup is a 790i with E8400, breaking 5Ghz is no problem at all and benching at 5.2Ghz now.

DaedalusHelios · Apr 11, 2008

magibeg said:
All units are 110V, none of them will work on 230V, and we won't be shipping out side North America, if you buy one and have it shipped to EU etc we can not warrant the unit as we have no control over shipping and the fact you are using a 230 to 110 converter.

uh..... What about canada? We use 110v why don't we get a better warrenty

Dude lol.... Canada is in North America.

The warranty will be good for you too. You just say you live in the US and when it comes time to receive it just ship it to my house and I will send it to you. :laugh:

PVTCaboose1337 · Apr 11, 2008

DaMulta said:
299.99 verses 899.99 for the same thing.

So they cut corners to keep the cost down....no big deal IMO.

Cryo-Z initial notes
http://www.xtremesystems.org/forums/showthread.php?t=184072

I understand where you are coming from, but I personally cannot stand that there was already rust forming on the review sample! I think OCZ would want to protect their name and make higher quality products. Although it is cheap, it is not like they are producing millions of them! If there are only a few, make the few good, and build them to last.

substance90 · Apr 11, 2008

I don`t care if the warranty isn`t valid outside the US. As soon as it is released I am ordering one of these and importing it in Europe!

Megasty · Apr 11, 2008

PVTCaboose1337 said:
I understand where you are coming from, but I personally cannot stand that there was already rust forming on the review sample! I think OCZ would want to protect their name and make higher quality products. Although it is cheap, it is not like they are producing millions of them! If there are only a few, make the few good, and build them to last.

The casing looks like my old tackle box but $300 for -40C, hell it can look like a shoe box as long as it works. All us OCers are licking our chops over this. The old clunker as I like to call it was $900, a little too pricy but it worked. This will allow the folks who just blew most of their cash on the cpu to overclock the hell out of it w/o doing the same to their wallets :rockout:

asb2106 · Apr 11, 2008

I guess Im very optomistic or I have no clue what a Phase should look like(and I dont) but I think it looks pretty nice.

DaedalusHelios · Apr 11, 2008

I wish it had a buy here link....

Well maybe the manual lets us know something? http://www.ocztechnology.com/drivers/CryoZ_manual.pdf

erocker · Apr 11, 2008

I plan on losing the casing all together with mine. I should be able to stuff it in my full tower! Is it wrong to pay my little brother to sit and watch thier website? :laugh:

DaMulta · Apr 11, 2008

erocker said:
I plan on losing the casing all together with mine. I should be able to stuff it in my full tower! Is it wrong to pay my little brother to sit and watch thier website?

NO LOL

newtekie1 · Apr 11, 2008

PVTCaboose1337 said:
I understand where you are coming from, but I personally cannot stand that there was already rust forming on the review sample! I think OCZ would want to protect their name and make higher quality products. Although it is cheap, it is not like they are producing millions of them! If there are only a few, make the few good, and build them to last.

I understand what you are saying. But I don't think it is an option to release a $300 Phase Change and have high quality. The important parts are up to standards, but the case isn't. I would rather have a $300 Phase with a poor case than no $300 Phase at all. I think I can handle a little rust on the case to save $600.

asb2106 · Apr 11, 2008

newtekie1 said:
I understand what you are saying. But I don't think it is an option to release a $300 Phase Change and have high quality. The important parts are up to standards, but the case isn't. I would rather have a $300 Phase with a poor case than no $300 Phase at all. I think I can handle a little rust on the case to save $600.

+1, I would never consider a phase cooler unless it was sub 500. I can deal with the case, and clean it up myself if need be.

WarEagleAU · Apr 11, 2008

This is pretty awesome actually. Id love to get one, so Im hoping after the initial release, they plan to do more.

jbunch07 · Apr 11, 2008

erocker said:
I plan on losing the casing all together with mine. I should be able to stuff it in my full tower! Is it wrong to pay my little brother to sit and watch thier website?

you can pay me to do it

erocker · Apr 11, 2008

My little brother takes candy and shiny money as payment! :laugh:

[I.R.A]_FBi · Apr 11, 2008

newtekie1 said:
I understand what you are saying. But I don't think it is an option to release a $300 Phase Change and have high quality. The important parts are up to standards, but the case isn't. I would rather have a $300 Phase with a poor case than no $300 Phase at all. I think I can handle a little rust on the case to save $600.

spray likkle wd40 on that bish ...

Mussels · Apr 11, 2008

DaMulta said:
From what I was told last year, when the OCZ was first supposed to release these. That in the EU they have laws that would not you ship these to them with the gas inside of them. So you would have to open another shop up to fill them after they had made it to the EU. That would cost $$$ and a engineer has to check everyone of these I believe.

that is correct. originally i was getting a review sample of one, but they found out if they shipped it to me i'd have to re-gas it myself... not exactly going to work well.

Any country they sell to, needs their own gassing plant that complies with that countries laws as you cant ship compressed gasses like the ones in this unit via air.

oh and for those talking about modding the case, i can confirm the hose is NOT detachable - you'll need to make sure its long enough to reach your hole, as well as into the case to the CPU. Try and find the length before doing anything. I also recall the original model not being very flexible, so you may need to aim straight for the socket via the side panel - if you have an 80mm fan hole for example, that may line up just nicely if you cut the grille out.

asb2106 · Apr 11, 2008

Mussels said:
that is correct. originally i was getting a review sample of one, but they found out if they shipped it to me i'd have to re-gas it myself... not exactly going to work well.

Any country they sell to, needs their own gassing plant that complies with that countries laws as you cant ship compressed gasses like the ones in this unit via air.

oh and for those talking about modding the case, i can confirm the hose is NOT detachable - you'll need to make sure its long enough to reach your hole, as well as into the case to the CPU. Try and find the length before doing anything. I also recall the original model not being very flexible, so you may need to aim straight for the socket via the side panel - if you have an 80mm fan hole for example, that may line up just nicely if you cut the grille out.

Well my plans are not to mod the case, just clean it up if it comes in roughed up.

Im alittle worried about my case not reaching, anyone have any ideas on the length of the hose? Plus I might not have room to drill out a hole in the bottom of my case, I might, might not.

DaedalusHelios · Apr 11, 2008

Mussels said:
that is correct. originally i was getting a review sample of one, but they found out if they shipped it to me i'd have to re-gas it myself... not exactly going to work well.

Any country they sell to, needs their own gassing plant that complies with that countries laws as you cant ship compressed gasses like the ones in this unit via air.

oh and for those talking about modding the case, i can confirm the hose is NOT detachable - you'll need to make sure its long enough to reach your hole, as well as into the case to the CPU. Try and find the length before doing anything. I also recall the original model not being very flexible, so you may need to aim straight for the socket via the side panel - if you have an 80mm fan hole for example, that may line up just nicely if you cut the grille out.

The compressor is compatible with 1394a coolant. That can be picked up from car parts places with an adapter to feed it into that phase change unit. Its a universal plug for putting the coolant in too.

asb2106 · Apr 11, 2008

DaedalusHelios said:
The compressor is compatible with 1394a coolant. That can be picked up from car parts places with an adapter to feed it into that phase change unit. Its a universal plug for putting the coolant in too.

You have to be certified in Wisconsin to even touch that stuff, let alone buy it

erocker · Apr 11, 2008

Yes, and it sucks! I'm certified however, but in many states, anyone can buy the stuff!

Mussels · Apr 11, 2008

yeah but OCZ figured it wouldnt sell if you needed to go get a licence and the refrigerant yourself... even if 'anyone' can buy it, if its not legal to put it in, OCZ could get sued for selling something that encourages an illegal/dangerous act.

Before it gets lost: anyone know the length of the hose?

erocker · Apr 11, 2008

Just take it to any automotive shop and it would't cost you too much at all! I imagine just about every car in Australia has A/C! Or do you have to take your car to a special plant there too? If it used R12 on the other hand (which is much better IMO, but bad for the environment) it would cost a lot!

Processor	i7 920 @ 3.6 GHz (4.0 when gaming)
Motherboard	Asus Rampage II Extreme - Yeah I Bought It...
Cooling	Swiftech.
Memory	12 GB Crucial Ballistix Tracer - I Love Red
Video Card(s)	ASUS EAH4870X2 - That Fan Is...!?
Storage	4 WD 1.5 TB
Display(s)	24" Sceptre
Case	TT Xaser VI - Fugly, Red, & Huge...
Audio Device(s)	The ASUS Thingy
Power Supply	Ultra X3 1000W
Software	Vista Ultimate SP1 64bit

Processor	i5-2500k
Motherboard	ASRock z68 pro3-m
Cooling	Corsair A70
Memory	Kingston HyperX 8GB 2 x 4GB 1600mhz
Storage	OCZ Agility3 60GB(boot) 2x320GB Raid0(storage)
Display(s)	Samsung 24" 1920x1200
Case	Custom
Power Supply	PC Power and Cooling 750w
Software	Win 7 x64

System Name	Whim
Processor	Intel Core i5 2500k @ 4.4ghz
Motherboard	Asus P8Z77-V LX
Cooling	Cooler Master Hyper 212+
Memory	2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card(s)	Gigabyte GTX 670 2gb
Storage	Samsung 840 Pro 256gb, WD 2TB Black
Display(s)	Shimian QH270 (1440p), Asus VE228 (1080p)
Case	Cooler Master 430 Elite
Audio Device(s)	Onboard > PA2V2 Amp > Senn 595's
Power Supply	Corsair 750w
Software	Windows 8.1 (Tweaked)

System Name	Work in progress
Processor	AMD 955---4Ghz
Motherboard	MSi GD70
Cooling	OcZ Phase/water
Memory	Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s)	CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage	SSD 64GB
Display(s)	Envision 24'' 1920x1200
Case	Using the desk ATM
Audio Device(s)	Sucky onboard for now :(
Power Supply	1000W TruePower Quattro

System Name	Cosmos F1000
Processor	i9-9900k
Motherboard	Gigabyte Z370XP SLI, BIOS 15a
Cooling	Corsair H100i, Panaflo's on case
Memory	XPG GAMMIX D30 2x16GB DDR4 3200 CL16
Video Card(s)	EVGA RTX 2080 ti
Storage	1TB 960 Pro, 2TB Samsung 850 Pro, 4TB WD Hard Drive
Display(s)	ASUS ROG SWIFT PG278Q 27"
Case	CM Cosmos 1000
Audio Device(s)	logitech 5.1 system (midrange quality)
Power Supply	CORSAIR HXi HX1000i 1000watt
Mouse	G400s Logitech
Keyboard	K65 RGB Corsair Tenkeyless Cherry Red MX
Software	Win10 Pro, Win7 x64 Professional

Processor	Intel C2D 6450 @ 3.4Ghz
Motherboard	Asus P5B Deluxe Wi-Fi
Cooling	Zalman CNPS-9700 NT
Memory	2x 1GB Corsair DDR2-950 DHX CL5-5-5-15 2T 2.25V
Video Card(s)	Asus 8800GTS 640Mb @ 648Mhz, memory: 999Mhz
Storage	Hitachi 500GB SATA-II
Display(s)	Dell 2407WFP 24" widescreen
Audio Device(s)	Creative SoundBlaster X-Fi XtremeMusic
Power Supply	Chieftec 560W
Software	Windows Vista/XP Pro Dual-boot

System Name	File Server
Processor	2600k
Motherboard	idk
Cooling	H110
Memory	20gb of something
Video Card(s)	onboard!
Storage	2x120 SSD, (5x8tb)+(3x4tb) = 35 TB Z1 pool
Display(s)	couple 4k 32s
Case	cooler master something i think
Audio Device(s)	does anyone bother with anything but onboard?
Power Supply	Whatever OCZ PC Powercooling became. 1200 modular setup
Mouse	MX Master 2x
Keyboard	G710
Software	FreeNAS

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS TUF x670e
Cooling	EK AIO 360. Phantek T30 fans.
Memory	32GB G.Skill 6000Mhz
Video Card(s)	Asus RTX 4090
Storage	WD m.2
Display(s)	LG C2 Evo OLED 42"
Case	Lian Li PC 011 Dynamic Evo
Audio Device(s)	Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply	FSP Hydro Ti PRO 1000W
Mouse	Razer Basilisk V3 Pro
Keyboard	Tester84
Software	Windows 11

Processor	Intel Core i7 10850K@5.2GHz
Motherboard	AsRock Z470 Taichi
Cooling	Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory	32GB DDR4-3600
Video Card(s)	RTX 2070 Super
Storage	500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s)	Acer Nitro VG280K 4K 28"
Case	Fractal Design Define S
Audio Device(s)	Onboard is good enough for me
Power Supply	eVGA SuperNOVA 1000w G3
Software	Windows 10 Pro x64

System Name	Pandemic 2020
Processor	AMD Ryzen 5 "Gen 2" 2600X
Motherboard	AsRock X470 Killer Promontory
Cooling	CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory	32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s)	ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage	WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s)	ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case	Fractal Define R6 C
Audio Device(s)	Realtek 5.1 Onboard
Power Supply	Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse	Razer Death Adder
Keyboard	Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software	Windows 10 Pro x64

Processor	C2Q6600 @ 1.6 GHz
Motherboard	Anus PQ5
Cooling	ACFPro
Memory	GEiL2 x 1 GB PC2 6400
Video Card(s)	MSi 4830 (RIP)
Storage	Seagate Barracuda 7200.10 320 GB Perpendicular Recording
Display(s)	Dell 17'
Case	El Cheepo
Audio Device(s)	7.1 Onboard
Power Supply	Corsair TX750
Software	MCE2K5

System Name	Rainbow Sparkles (Power efficient, <350W gaming load)
Processor	Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard	Asus x570-F (BIOS Modded)
Cooling	Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory	2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s)	Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage	2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s)	Phillips 32 32M1N5800A (4k144), LG 32" (4K60) \| Gigabyte G32QC (2k165) \| Phillips 328m6fjrmb (2K144)
Case	Fractal Design R6
Audio Device(s)	Logitech G560 \| Corsair Void pro RGB \|Blue Yeti mic
Power Supply	Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse	Logitech G Pro wireless + Steelseries Prisma XL
Keyboard	Razer Huntsman TE ( Sexy white keycaps)
VR HMD	Oculus Rift S + Quest 2
Software	Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores	Nyooom.

OCZ Cryo-Z Phase Change Unit New Information and Details

New Member

New Member

Graphical Hacker

My stars went supernova

Graphical Hacker

New Member

New Member

*

My stars went supernova

Semi-Retired Folder

Bird of Prey

New Member

*

Freshwater Moderator

*

Freshwater Moderator

*