Hello. I some advice please. I just mounted a new PC based on MSI B350 Mortar Arctic + Ryzen 5 1600.
All this was added to what I had: BeQuiet Dark Power Pro 11 650W, Nvidia 1080TI Fe, 32GB DDR4 Crucial, SSD, HDD.
Everything was functional on an Intel system without any problem.
After switching to AMD, I mounted everything I needed, but it seems like AMD system does not start when I power on. The beep sounds at the PSU is like a "POW" sound, I think it's some kind of protection, but the PSU itself does not start either. I repeat: with 1080Ti FE mounted on the motherboard. Nothing starts. No PSU, no motherboard.
I pulled it off, I checked the source back on Intel computer, everything OK. The last bios from MSI is present, one RAM in the indicated slots, RAM removed, without SSD, HDD, with them, with fans off/on, etc. It does not start. As if it had not power. Even the PSU. Just the "POW" sound.
OK so I go back and pull off the video card. It starts. Everything OK. I mount a 980 and it starts, it runs, everything OK. Back with the 1080Ti again. Nothing happens. I take everything except the CPU and motherboard and mount it back with the same PSU on Intel, it works. With the 1080 Ti mounted.
I have the same components from the moment when the 1080Ti came out and the PSU it worked fine on Intel.
Please. Any ideas?
Thank you.
All this was added to what I had: BeQuiet Dark Power Pro 11 650W, Nvidia 1080TI Fe, 32GB DDR4 Crucial, SSD, HDD.
Everything was functional on an Intel system without any problem.
After switching to AMD, I mounted everything I needed, but it seems like AMD system does not start when I power on. The beep sounds at the PSU is like a "POW" sound, I think it's some kind of protection, but the PSU itself does not start either. I repeat: with 1080Ti FE mounted on the motherboard. Nothing starts. No PSU, no motherboard.
I pulled it off, I checked the source back on Intel computer, everything OK. The last bios from MSI is present, one RAM in the indicated slots, RAM removed, without SSD, HDD, with them, with fans off/on, etc. It does not start. As if it had not power. Even the PSU. Just the "POW" sound.
OK so I go back and pull off the video card. It starts. Everything OK. I mount a 980 and it starts, it runs, everything OK. Back with the 1080Ti again. Nothing happens. I take everything except the CPU and motherboard and mount it back with the same PSU on Intel, it works. With the 1080 Ti mounted.
I have the same components from the moment when the 1080Ti came out and the PSU it worked fine on Intel.
Please. Any ideas?
Thank you.