• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Processor GFlops Compilation

Thanks sasqui, temps were wayy to high for comfort though!

Gettin a 250W Peltier to play with soon, I'll dig my spare swiftech apogee out and hook it up to the garden hose for some overclocking insanity :D

Hoping for 4.8-5ghz linpack stable and at least 5.2ghz benchable. :rockout:
 
Is this multithreaded? I shouldn't be able to get that close to a 4.5ghz dual core :laugh:
 
yep, multithreaded. Your run was very good :)
 
Table Updated

And please remember to format your posts as instructed in the original post, this makes updated the table easier, and remember to give the average of your scores.
 
Add me

For comparison, here is my cpu @ stock speeds:

infrared | Intel E8400 @ Stock 3GHz | 20.74668

Capture052.png
 
Last edited:
Before the BSOD... I was getting 33.2 GFLOPS on my X4 920 @ 3,360Mhz... Will redo and edit in the screens now that I have bumped my HT voltage to 1.3V (was 1.2V).
 
Add Me

Darknova | Phenom II X3 720BE @ 3.28Ghz | 25.609225

GFlops.jpg
 
Add Me

Flyordie said:
Before the BSOD... I was getting 33.2 GFLOPS on my X4 920 @ 3,360Mhz... Will redo and edit in the screens now that I have bumped my HT voltage to 1.3V (was 1.2V).
Click to expand...

Flyordie | Phenom II X4 920 @ 3,360Mhz +2% | 39.48 <--- Not Stable... fixed the issue by ramping the DRAM voltage to 1.8V. I was running 1.7V through my Reapers...
I used custom to add some more RAM to the measure... will redo a test using 1024mb... (standard)... I always fail the 4th test... I think its my HT or DRAM... ;-\ who knos. Hope to figure it out sometime soon... hopefully with the next BSOD (if I get another one)
IntelBurnTest.jpg


ROUND 2!
Flyordie|Phenom II X4 920 @ 3,360Mhz +2%|39.6515 <--- STABLE!
IntelBurnTest2.jpg
 
Last edited:
I'd like stable test, but for the time being I'm going to accept unstable runs as long as the test finishes. If you get a stable run, please post it and I will replace the unstable run.
 
Add Me

newtekie1 | Intel | Atom N270 @ 1.6GHz | 00.3075

intelburntestatom.png
 
I like ur background... must kno who it is...
Is that... Miss Miller?
 
add me

hoss331 | Q9650 @ 4.425GHz | 59.4010

Untitledc.jpg
 
Last edited:
I need to bench this at home, good benchmark IMO.

Anyone got a Q6600(3.6ish) we could run for this? I'd like to see how close that would come to a PII at stock speeds.
 
add me

rflair | Intel | q6600 @ 3.6GHz | 44.95

gflops.jpg
 
Last edited:
Add please.

erocker | Intel | E8600 @ 4ghz | 26.28145

burnnn.jpg
 
you dont have to add this, yorky at 3.6ghz

Untitledc1.jpg
 
Ummm... something wrong here? How you guys getting like a bazillion GFlops?! I'm talking about the guys with the same CPU btw.

EDIT: Nvm, hoss331, you have steedstep on or is CPU-Z glitched?!

WUT.png
 
Last edited:
No its not on and cpuz is not glitched. Why?
 
It could be caused by background tasks. For example, I had to snooze WCG because if I didn't, it was getting 70+ second times vs 25-35 second times.

I'd imagine also the memory speed could make a big difference. CPU-Z will tell you more about memory timings than Core Temp.
 
hoss331 said:
No its not on and cpuz is not glitched. Why?
Click to expand...

Bad math on my part, 450 x 9... when the pic says 8.

I need sleep.

And heres my RAM timings:

5-6-6-17 @ 754Mhz w/ 2.0V

Total of 8GB.
 
Add Me

chuck216 | Phenom II 940 @ 3.5 Ghz | 40.922625

Gflops.jpg
 
nascasho said:
Bad math on my part, 450 x 9... when the pic says 8.

I need sleep.

And heres my RAM timings:

5-6-6-17 @ 754Mhz w/ 2.0V

Total of 8GB.
Click to expand...

Your ram is definitely not helping, but these chips are hardly working at 3.4. Is that as high as your ram can stably go? This is 3.4 with my ram at 1134.

NewBitmapImage3b-1.jpg
 
You must log in or register to reply here.
Back
Top