- Joined
- Nov 13, 2006
- Messages
- 15,449 (2.42/day)
- Location
- Mid-Atlantic
System Name | Desktop |
---|---|
Processor | i5 13600KF |
Motherboard | AsRock B760M Steel Legend Wifi |
Cooling | Noctua NH-U9S |
Memory | 4x 16 Gb Gskill S5 DDR5 @6000 |
Video Card(s) | Gigabyte Gaming OC 6750 XT 12GB |
Storage | WD_BLACK 4TB SN850x |
Display(s) | Gigabye M32U |
Case | Corsair Carbide 400C |
Audio Device(s) | On Board |
Power Supply | EVGA Supernova 650 P2 |
Mouse | MX Master 3s |
Keyboard | Logitech G915 Wireless Clicky |
Software | The Matrix |
I have a Foxconn Blackops board socket 775 that runs a Q6600 like a champ. I got a Q9550 to give it a boost but the board will not boot. The CPU is supported with the current BIOS revisions I have installed:
http://www.foxconnsupport.com/cpusu...ocket=Socket 775&model=BLACKOPS&cputype=Intel
I have cleared CMOS multiple times and even removed the CMOS battery for good measure.
What happens is the board receives power and the fans turn,etc but no beep or video signal. It just sits there sometimes. Other times it is cycling on and off every 2-3 seconds.
http://www.foxconnsupport.com/cpusu...ocket=Socket 775&model=BLACKOPS&cputype=Intel
I have cleared CMOS multiple times and even removed the CMOS battery for good measure.
What happens is the board receives power and the fans turn,etc but no beep or video signal. It just sits there sometimes. Other times it is cycling on and off every 2-3 seconds.