• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

RAID vs AHCI mode

D

Derek12

Joined
Jan 12, 2010
Messages
1,526 (0.27/day)
System Specs
System Name Custom Built
Processor AMD Ryzen 5 3600
Motherboard Asus PRIME A520M-A
Cooling Stock heatsink/fan
Memory 16GB 2x8GB Corsair Vengeance LPX 2400MHz
Video Card(s) MSI 1050Ti 4GB
Storage KINGSTON SNVS250G 256GB M.2 + 2 data disks
Display(s) Dell S2421NX
Case Aerocool CS103
Audio Device(s) Realtek
Power Supply Seasonic M12II-520 EVO
Mouse Logitech MX Master 2S
Keyboard Logitech
Software Windows 11 Pro 64-bit
Hi.
I have a GA-MA74GM-S2H mobo, and a Seagate SATAII 150 GB Hard disk and I have installed Windows 7 ultimate 64 bit. I have enabled the AHCI mode for the SATA ports on BIOS
I am wondering if RAID mode is better than AHCI mode, though I have only one disk.

I enabled it anyway and Windows 7 refuses to boot (it restarts continously before the desktop is reached), I reverted to AHCI and it runs fine again.
Many thanks
 
RAID stands for Random Array of Inexpensive Disks, since you don't have an array but a single disc I'm not surprised it won't boot! Sorry, just stick with AHCI if thats working for you.

Welcome to TPU BTW!
 
but if you did indeed have two drives or more then raid0 is faster by far.
 
That is a setting that can only be changed when you are installing the operating system. If you try and change it afterward you have to enable/install a different storage driver or reinstall the operating system with AHCI or RAID enabled.
 
is AHCI faster than IDE?

i have always wondered about this setting, sorry to ask a question on Ur thread buddy :toast:

i have had problem with setting it to AHCI though, it wont boot. but if i set it to AHCI and do a new install of windows i start having problems. :(

EDIT: NOT TO WORRY I FOUND A THREAD :toast:
 
Last edited:
mikek75 said:
RAID stands for Random Array of Inexpensive Disks, since you don't have an array but a single disc I'm not surprised it won't boot! Sorry, just stick with AHCI if thats working for you.

Welcome to TPU BTW!
Click to expand...

Yes, it's random. Sometimes they make them out inexpensive hard disks, some times in expensive stone disks found on the beach. Though they really have to be disk shaped (not just rocks). I once made a RAID array of random phaistos disks, I have no clue what those are, I googled it. Point is, it's all random.


Or perhaps it means Redundant instead.
 
Oh you awkward sod, yeah, you' got me. Redundant.
 
i chuckled at that one, i learned in school years ago: redundant array of independent drives
 
As the link I posted shows, it can be either, I learnt the original (albeit I mixed up the Random and Redundant bit).

The term was first coined when larger drives were very expensive, so the idea was to chain together a number of cheaper, smaller drives to achieve the effect.
 
JBOD: just a bunch of drives

that one sounds funny, but is actually correct lol
 
Last edited:
Back on topic maybe?
The OP isn't asking what RAID stands for, they want to know what BIOS setting should be used and when.
 
Derek12 said:
Hi.
I have a GA-MA74GM-S2H mobo, and a Seagate SATAII 150 GB Hard disk and I have installed Windows 7 ultimate 64 bit. I have enabled the AHCI mode for the SATA ports on BIOS
I am wondering if RAID mode is better than AHCI mode, though I have only one disk.

I enabled it anyway and Windows 7 refuses to boot (it restarts continously before the desktop is reached), I reverted to AHCI and it runs fine again.
Many thanks
Click to expand...

I had the same problem, back when I was running with single disks.
On my Win7 64 bit I had to disable AHCI when installing...afterwards I then could enable AHCI mode again and the OS was running fine...I don´t know what the course is....

A little note: RAID0 is faster than AHCI when running - BUT...the boot-up time on a RAID
system is much slower due to the RAID controllers initializing of the disks/arrays.
 
Hello, first, sorry for the late reply :(
Many thanks to all!
Then If I don't have more than one disk, the RAID mode is useless and should I use the AHCI? And if in the future I want to add another disk, then should I enable RAID mode and reinstall Windows?
And yeah the bootup time is faar slower because the mobo have to initialize the controller ... :-(and it used a RAID0/JBOD mode...
 
IDE = the old standard
AHCI = IDE + NCQ and hotswap support
RAID = same as AHCI, but the ability to use RAID modes.


If you change a drive in/out of RAID, it has to be formatted. So yes, you have to reinstall windows if you use RAID at a later date. You do NOT need RAID to have multiple drives.
 
mikek75 was right with Random array it is either.

Anyroad, as regards to RAID vs AHCI - Intel actually recommend that you use RAID instead of AHCI even if you're not using RAID features as this gives you...

"Maximum flexibility, due to the issues caused when the mode is switched once an operating system has already been installed."

... it is possible, if our nub 'technicians' built a machine with IDE enabled (AHCI is a requirement for our builds) I'd have to come in and swap 'em over to AHCI with Windows installed, from my own experience the RAID mode that Intel recommend you use doesn't offer any more benefits than AHCI unless you're going to bung in another drive and RAID them.
 
DanTheBanjoman said:
No it is either inexpensive or independent, R always means redundant. Random makes no sense whatsoever.
Click to expand...

^ what he said. JBOD is the only raid that would make sense with random
 
I already admitted I'd f***** up with the R abbreviation.
 
DanTheBanjoman said:
No it is either inexpensive or independent, R always means redundant. Random makes no sense whatsoever.
Click to expand...

I'll have to find the literature I have that states random - actually Mussels stated it before I finished my post. It's JBOD I was thinking of.
 
You must log in or register to reply here.
Back
Top