• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

Status
Not open for further replies.
Something weird is happening with rear channels in 5.1 configuration. If I plug every jack and connect it and set it through the jack sensing feature - it works. If I connect the headphones to the front panel or I restart the PC - the channels are scrambled again and it plays the sounds for the rear channels barely hearable in the front channels
This is for the Standard version, I didn't try the DCH one yet. Check please also the missing ASIO driver in the Standard version, many thanks in advance!
 
please help.
"Realtek Switch Audio Output Between Back vs Front Panel On Desktop."

Can I fix it using "Realtek Audio Device Tweak"?

mainboard ASROCK X299 Killer SLI/ac
Realtek ALC1220
 

Attachments

  • 1.PNG
    1.PNG
    109.8 KB · Views: 294
  • 12.png
    12.png
    56.1 KB · Views: 266
Vacintosh said:
please help.
"Realtek Switch Audio Output Between Back vs Front Panel On Desktop."

Can I fix it using "Realtek Audio Device Tweak"?

mainboard ASROCK X299 Killer SLI/ac
Realtek ALC1220
Click to expand...
Friend, can you explain better what happened?
 
Alan Finote said:
Friend, can you explain better what happened?
Click to expand...

Hey Alan

I can't make the settings that appear in the link below.
there is no checked option in the screenshot below.
"headphones" and "speakers" are not visible at the same time.

www.nextofwindows.com

Realtek Switch Audio Output Between Back vs Front Panel On Desktop - NEXTOFWINDOWS.COM

Realtek is the biggest audio driver provider for PC. If you have a traditional desktop tower chances are your motherboard relays on Realtek's driver to
www.nextofwindows.com www.nextofwindows.com

Thanks.

Vacintosh said:
Hey Alan

I can't make the settings that appear in the link below.
there is no checked option in the screenshot below.
"headphones" and "speakers" are not visible at the same time.

www.nextofwindows.com

Realtek Switch Audio Output Between Back vs Front Panel On Desktop - NEXTOFWINDOWS.COM

Realtek is the biggest audio driver provider for PC. If you have a traditional desktop tower chances are your motherboard relays on Realtek's driver to
www.nextofwindows.com www.nextofwindows.com

Thanks.
Click to expand...

when "Microsoft driver installed" there is not any problem.
i can do "make front and rear output devices playback two different audio streams simultaneously"

but it doesn't happen when I install your driver
 

Attachments

  • 2017-11-07_2128_001.png
    2017-11-07_2128_001.png
    8.2 KB · Views: 170
Last edited:
@Alan Finote Working well on Digital output mate. But I can't for the life of me get analog 6 channel working properly for 5.1. I have a Logitech Z-5500 set, and before installing your drivers 6 channel worked fine, but now only Front and Centre/Sub channels work. Rear channels are completely quiet. The Jack mapping pop-up was selected correctly. I'm stumped atm. Much appreciate some help. Running Windows 10 build 2004. Cheers
 
Latest Version Windows 10 2004. Well at least its the first version that sound balster connect looks not double icons and shows whole menu. But in this version no sound at all anymore and dts seams to be lost as suupreme fx does not show any effects and the others (not only sb connect till now) cant connect. Driver looks installed right as it shows your name
 

Attachments

  • Image 2.jpg
    Image 2.jpg
    918.2 KB · Views: 192
Hello!

Running on MSI Z97 Gaming 3 - Analog output to 5.1 - Windows 10 latest. Creative SB Connect will not run at all . Also 2.0 sources used to play on 5.1, after the latest updates they will not. Tried uninstalling many times. Removed all drivers with DDU, as well as manually via Device Manager. Also tried different installations with AAF Bus Driver installed or not (keeping the vanilla bus driver) to the same result. 5.1 in 5.1 movies in VLC play fine. 2.0 to 5.1 movies - music (Spotify) and games such as "Escape from Tarkov" will not. Furthermore tried manually deleting before installation all coresponding directories (Creative/A-Volute/Dolby) to no effect.

It must be something with Creative SB Connect 720 as it will not run at all. As i remember 4 versions before of your driver pack, down-mixing - up-mixing was handled by Creative. This must be the case. Some incompatibility between those two (Creative & another component of the driver pack).

Attached, you will find my system info.

Also at this point i would like to thank you for the marvelous work you do in bringing us new experience!

Thank you very much for your support and the enormous amount of work you put into the project. You should be hired by a third party such as Dolby.

Stability now is the only factor of improvement and you actually do pretty well!
 

Attachments

n0fear said:
Latest Version Windows 10 2004. Well at least its the first version that sound balster connect looks not double icons and shows whole menu. But in this version no sound at all anymore and dts seams to be lost as suupreme fx does not show any effects and the others (not only sb connect till now) cant connect. Driver looks installed right as it shows your name
Click to expand...
@n0fear I recommend you go to the end of the first post on this thread and follow the spoiler tutorial "IF NO EFFECTS ARE WORKING, EVEN THE REALTEK ONES?"
 
Alan Finote said:
@n0fear I recommend you go to the end of the first post on this thread and follow the spoiler tutorial "IF NO EFFECTS ARE WORKING, EVEN THE REALTEK ONES?"
Click to expand...

I can do that ofcoz, but so you changed something in the package as all other drivers before worked (instead of the SB720 not connecting Problem)?!

@Alan Finote this thing is driving me crazy :) what i did, i just installed the same driver again as i wanted to do your modifications, did nothing elese as the last time, but now i have sound again everything working instead of STILL the same SB Connect not able to connect to the soundcard... what i did, disable/uninstall VPN, disabled Windows Defender, Firewall.... are there any logs i could check for SB Connect to get this last thing working too? I read the hole forum the last weeks, and found alot of ppl having the same blue Popup, telling SB cant connect, but did not find any of them found out what the problem is, is must be some other drivers or programms or updates, as it did work on a absolutly clean machine but never again after :-( Thanks alot for your patience and great help!
 
Last edited:
45.png


Hi you guys im wondering if anyone can help , as you can see i only have two rear jacks showing
when i have all the connected in realtek propertys is shows all 3 but not in realtek manager im missing a jack

Dell 8930 Windows 10 Home , Codec ALC3220
 
Stan215 said:
View attachment 158884

Hi you guys im wondering if anyone can help , as you can see i only have two rear jacks showing
when i have all the connected in realtek propertys is shows all 3 but not in realtek manager im missing a jack

Dell 8930 Windows 10 Home , Codec ALC3220
Click to expand...
Go to "%systemroot%\System32\drivers", delete "rtkhdaud.dat" and restart your computer.
 
Vacintosh said:
Hey Alan

I can't make the settings that appear in the link below.
there is no checked option in the screenshot below.
"headphones" and "speakers" are not visible at the same time.

www.nextofwindows.com

Realtek Switch Audio Output Between Back vs Front Panel On Desktop - NEXTOFWINDOWS.COM

Realtek is the biggest audio driver provider for PC. If you have a traditional desktop tower chances are your motherboard relays on Realtek's driver to
www.nextofwindows.com www.nextofwindows.com

Thanks.



when "Microsoft driver installed" there is not any problem.
i can do "make front and rear output devices playback two different audio streams simultaneously"

but it doesn't happen when I install your driver
Click to expand...

Please help me.
i need "make front and rear output devices playback two different audio streams simultaneously"
 
Balls5000 said:
Your drivers are awesome. Windows update keeps replacing them how can I stop it?
Maybe others have the same problem
Click to expand...
Run this BAT below. It will help you with some settings and exclude drivers from Windows quality updates.
But be sure to check "Control Panel\System\Advanced System Settings\Hardware\Device Installation Settings" if the option NO (...) is selected. If not, select it and save your changes.

Vacintosh said:
Please help me.
i need "make front and rear output devices playback two different audio streams simultaneously"
Click to expand...
Open "Realtek Audio Device Tweak", select the "Driver Policy" tab, check "JackCfg" and the following options on the right side: "PBIndependentSupport", "FInRMuteSupport", "MuteMultiAAPathSupport", "RearInMuteInternalSupport", and restart your computer.
 

Attachments

Last edited:
Olá @Alan Finote,
Nestes dias, já reparei que o Dolby Atmos e o Sonic Studio já trabalham.
Não sei se é normal, mas o Sonic Studio só faz efeito em Stereo em vez de ser em 5.1 como o Dolby Atmos e o Sound Blaster.
Outra coisa, já disse anteriormente, como disse comprei um novo computador devido ao que estamos à pandemia, pois o outro já não se aguenta com muitas aplicações, o problema é que não consigo habilitar o Volume do Subwoofer no programa da Realtek, no PC antigo com ALC883 com o programa genérico dava (Este tem o ALC887).
Como pode ver na imagem abaixo, já habilitei o UIShowWooferVolume mas continua a não dar.
Pode-me ajudar nesses 2 aspectos?
Muito grato e o seu Mod funciona muito bem, se for para ouvir música, o Dolby Atmos e o Sound Blaster não podiam funcionar melhor.

Hi,
These days, I noticed that Dolby Atmos and Sonic Studio are already working.
I don't know if it's normal, but Sonic Studio only works in Stereo instead of 5.1 like Dolby Atmos and Sound Blaster.
Another thing, as I said before, as I said, I bought a new computer because of the pandemic, because the other one can no longer handle many applications, the problem is that I cannot enable the Subwoofer Volume in the Realtek program, on the old PC with ALC883 with the generic dava program (This one has ALC887).
As you can see in the image below, I have already enabled UIShowWooferVolume but it still doesn't work.
Can you help me with these 2 aspects?
Very grateful and his Mod works very well, if it is to listen to music, Dolby Atmos and Sound Blaster could not work better.

1592139753821.png
 
Alan Finote said:
Run this BAT below. It will help you with some settings and exclude drivers from Windows quality updates.
But be sure to check "Control Panel\System\Advanced System Settings\Hardware\Device Installation Settings" if the option NO (...) is selected. If not, select it and save your changes.


Open "Realtek Audio Device Tweak", select the "Driver Policy" tab, check "JackCfg" and the following options on the right side: "PBIndependentSupport", "FInRMuteSupport", "MuteMultiAAPathSupport", "RearInMuteInternalSupport", and restart your computer.
Click to expand...

it was not ://

1592146032408.png
 

Attachments

  • 1592153807466.png
    1592153807466.png
    366.6 KB · Views: 179
after removing the old version I went to install this new version by setting the realtek default driver during installation and choosing the aduio dts interactive decoder option but setting that mode the audio does not work, while in the other audio quality type modes they work perfectly
 
@Alan Finote any suggestion for muted rear speakers in 6 channel analog please? I've checked volume control, restarted, unplugging and replugging, jack remapping. Full uninstall then reinstall. Still not working those rear speakers .
 
I hear no base from my subwoofer. I use 2.1 Stereo Speakers. Headphone mode on in Sound Blaster. Earlier drivers used to give LFE base in the subwoofer IDK what is happening now and why it won't give base to my Subwoofer @Alan Finote What settings do I need to enable so that it gets enabled ?
 
I wasn't able to make Sonic Studio III fully operational:

1. Tried latest pack - didn't work at all (TIMEOUT whatever I tried - got tired of reinstalling and applying workarounds);
2. Tried previous pack - all in all Sonic worked, but I couldn't make equalizer work as intended. At first it works, but it only gives you generic presets for speakers. You try to make them think you have headphones by unplugging-plugging them and activating-deactivating simultaneous output, and you succeed to do this, Sonic starts to offer you more presets (like for Audio-Technica M50x for example). But... They do not change the sound. And Sonic equalizer stops working at that moment completely, including Custom one.

Interestingly - presets fully worked for... HDMI output.
 
Status
Not open for further replies.
Back
Top