• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Share your AIDA 64 cache and memory benchmark here

Last edited:
Like a sports truck lol..

Screenshot 2025-03-02 173607.png
 
Cool, so I guess they all do 8000?

The challenge is tight timings?

Pretty sure these sticks do not like CL26 at any speed too much, but I have only tried up to 1.5v..

Screenshot 2025-03-08 161217.png
 
New 6000CL26 A-Die kit @ 6000MTs,...

AIDA64 6000CL26 bios 2904.png


I lowered FCLK back to 2000, after testing 2200,.. no real performance gain, slightly lower Latency running 2200 @ 6000MTs. 2200 was stable but no point running out of sync for no real performance gain.

6000CL26 Baseline TM5 90-min no error.png
 
Last edited:
Delidded 9950X ES running PBO
ROG CROSSHAIR X870E APEX
2x16GB G.Skill Trident Z5 Royal Neo A-DIE @ 1.76 VDD / 1.55 VDDQ
Very large custom cooling with mora

First off we have some short karhu run, only 1 hour durations do to time constraints.
Core Tuning @ level 2 = over 10mb/s higher throughput then anything i managed on the GENE, ended at 372.30mb/s
View attachment 379043


With everything open bandwidth drops alittle
View attachment 379044

Also did alittle test in GB3 on the same boot which netted me a 15.2k / 14.75k memory score which is very good for a 9950X i would say
View attachment 379046

I also did a short 1 hour karhu run @ Core Tuning = legacy -> 53.9ns in AIDA64
Do note is pretty much only in AIDA the latency drops almost 10ns, while Clam latency stays the ~same and bandwidth is lower
View attachment 379047
Release day for the 9950X3D is finally here and i can start to share some screenshots :)

This is my new daily profile ive manged to stabilize the new G.SKILL 6000 CL26 sticks at
  • 9950X3D ES
  • 8600MT/s CL32
  • 1.74 VDD / 1.55 VDDQ needed for these settings
  • Core tuning level 2
  • 1.500 CPU VDDIO
  • 1.1 CLDO VDDP
15 hours karhu @ ~375mb/s :cool:
1741810658068.png


Can bench light programs @ synced 8800 / 2200 :toast:
For full y-cruncher bench stability i need to drop down to 8700MT/s
 
Got a used 7950X3D for $465 and sold 7800X3D for $445 :laugh: Worth much more than $20 for sure.
Good thing is it still does 2200Mhz FLCK with 8000 MT/s RAM like 7800X3D.

1741885642108.png
 
Playing around with 8600G and some good bin TRIDENT Z5s @8700CL36
 

Attachments

  • 8700CL36.jpg
    8700CL36.jpg
    1.1 MB · Views: 77
Squeezed every last drop of performance out of this cheap AliExpress Kingbank 16GB ×2 kit, rock solid at 1.4V and stable with TM5 (anta777's absolute config). Pretty satisfied with the results!

cachemem.png
ZenTimings_Screenshot.png
Snap17Mar2025222146.png
 
The internet said it was hard to run 4 sticks fast, they were right.

This is where I am at right now.. L3 got a good bump but I am ditch the new set.

Cant get em stable at timings I was running before let alone paired up.. dammit Jim.


Screenshot 2025-03-18 161938.jpg
 
Playing around with 8600G and some good bin TRIDENT Z5s @8700CL36
ok same kit but testing regular 1:1 mode GDM OFF at 6400CL28. Seems good but wow it makes the CPU run about 15C higher than running 8400CL36.
 

Attachments

  • 6400cl28.jpg
    6400cl28.jpg
    888 KB · Views: 54
Stock 14900K.
Memory OC only.
253w enforced limits
CL36 Samsung 6000 sticks. Z5

Screenshot 2025-03-19 042629.png
 
OK!

I think I have fingered out my problem.. just needed some VDDG IOD.. and maybe some VSOC, and maybe some extra on the ram..

Now that I am in the ballpark I think I can tune from here..

Screenshot 2025-04-06 082900.png
 
OK!

I think I have fingered out my problem.. just needed some VDDG IOD.. and maybe some VSOC, and maybe some extra on the ram..

Now that I am in the ballpark I think I can tune from here..

View attachment 393657
May I ask an off topic question please?
Since you are using an Asus Rog Strix, which sound enhancement software bundled with your motherboard? And are you happy with it?
 
May I ask an off topic question please?
Since you are using an Asus Rog Strix, which sound enhancement software bundled with your motherboard? And are you happy with it?
I couldn't tell you to be honest. I use sound from my GPU to my soundbar, to my TV for ATMOS.

Edit:

I do not sit at a desk, my setup is in my rec room where I sit on a couch hunched over my coffee table. My TV is about 8 feet away and my tower is about 9 feet away, and my sub is behind it :D
 
OK!

I think I have fingered out my problem.. just needed some VDDG IOD.. and maybe some VSOC, and maybe some extra on the ram..

Now that I am in the ballpark I think I can tune from here..

View attachment 393657
memory at 1.5v?

Do you have active cooling on it?
 
memory at 1.5v?

Do you have active cooling on it?
Not on it per se.. above it yes..

Was able to tweak some voltages a bit, I haven't tried to lower vdimm at all yet.. seems to max out at about 39c after a few hours of TM5 Absolute..

Screenshot 2025-04-06 161847.png


My setup currently..

IMG_1429.jpeg
IMG_1432.jpeg
 
So i have swapped over to my sample #3 9950X3D with the strongest IMC, and for the last week i have been finetuning the settings/voltages and pushing the memory as hard as i could for a fully stable daily memory profile

At the end of my journey i reached a wooping fully stable 8744MT/s CL32 with the APEX and these new G.SKill 6000 CL26 sticks :cool:
  • 9950X3D with core tuning level2 running PBO
  • ROG CROSSHAIR X870E APEX @ baseclock 100.5mhz
  • G.SKILL 6000MT/s CL26 @ 1.78VDD 1.55VDDQ cooled by custom heatsinks + 2x60mm noctua fans
  • FCLK @ 2211mhz / memory @ 8744MT/s CL32 (2200 /8700 multipliers with 100.5mhz baseclock)
  • Nitro 1-3-1 with synced tPHYRDL @ 38/38
  • Large custom watercooling with a mora
Decided to complete all the following stability tests in a single boot to show that i dont cherry pick settings for spesific benchmarks

6.5hours karhu @ 379mb/s
5.5hours RunMemTestPro @ 36609mb/s
1 hour OCCT Large AVX512
1 hour TestMem5 1usmus cfg
1 hour y-cruncher all tests enabled
1 hour LinX @ ~1900GFLOPS

For a performance comparison picked the following: (was running out of screenspace)

AIDA cache and memory benchmark
Clam latency benchmark
Clam bandwidth benchmark
MaxxMem2
1743978280671.png


I can complete pretty much all benchmark @ golden ratio 8800/2200 CL32 (8844/2211), but karhu will fail it after awhile, so the promised land is still alittle out of reach for fully stable daily settings atm :cry:
Have also updated all my y-cruncher runs for hwbot, but haven't uploaded yet since i need to swap to my 2*24GB m-die sticks before i can finished of with the 10B run for this cpu
 
Just messing around..

Screenshot 2025-04-06 204932.png
 
Back
Top