Share your AIDA 64 cache and memory benchmark here

[freeagent]

Just messin around..

 

[67Elco]

Temporary fan rigged on the memory...

No errors for the time being...

 

[Tatili]

Just messin around..

View attachment 337354

Yep, around....55 'ns

 

[glnn_23]

Spent a bit more time with the 8700g

 

[freeagent]

Yep, around....55 'ns

That is with error correction going nuts too, not stable.

 

[dgianstefani]

Just messin around..

View attachment 337354

That is with error correction going nuts too, not stable.

What voltages?

Do you have B die?

 

[freeagent]

What voltages?

Do you have B die?

Yup running 4X8 3200C14 since I moved to AM4. Voltage on the ram was 1.6v since my black and whites are not as strong as my royals.

 

[Tatili]

That is with error correction going nuts too, not stable.

What error correction do you see: GearOFF, bclk, cause just passed TM5, OCCT & y-cruncher VST?
If you can define stable in case, I'am playing continously from this morning, COD, CB2007, Starfield running like a charm rock stable, not a single clue of instability?

 

[freeagent]

What error correction do you see: GearOFF, bclk, cause just passed TM5, OCCT & y-cruncher VST?
If you can define stable in case, I'am playing continously from this morning, COD, CB2007, Starfield running like a charm rock stable, not a single clue of instability?

Dude..

I was not talking about you.

I was talking about my setup not being stable.

That is great that you have a CPU that can scale like that. I do too, but not this one

 

[67Elco]

Not certain where to go next with this. Evidently tRAS and tRC are off limits.

I am truly just stumbling around now lol...

Forward movement - No errors atm

 

[P4-630]

On latest F28 BIOS

 

[Atmaniac]

Found this thread thanks to google and wanted to share my results here. It took me many hours to achieve this result.

2x 32 GB DDR5-6800 Dual-Rank Kit

 

[RayneYoruka]

I always forget that this thread exists.. allow me to show my mix of ram.. I have 2 kits of trident Z neo (64gb total) (4 dimms), hynix and samsung.. I haven't really bothered with the timings or anything.. Both kits are rated the same specs, even the model number.. So I guess I got the lottery here? when I got my 5900x I had high ns, I went from mid 70s to 64ns without doing anything than just the bios update... so.. welp. If I ever get another trident Z kit and it matches the hynix one I will swap it with my streaming rig. That rig is using 3200mhz so it will be a nice bump.

This same memory combo worked fine in my 3700x with this x570 board, somehow

With the 3700x

 

[mrcardio33x]

CPU: BCLK 105 - LLC7 - PBO Scaler X6 - Boost Clock (-) 150 MHz or 5150 MHz

6000 MT/s CL26 34 32 30 / 2200 FCLK
VDD: 1.50v VDDQ/IO: 1.30v VSOC: 1.195v

 

[Tatili]

Yep, around....55 'ns

Update, near....55'ns

 

[freeagent]

Back on my 5900X

 

[P4-630]

Back on my 5900X

View attachment 340871

Just build a second rig, one with the x3d and the other with the 5900x...
No need hassle of switching CPU anymore

 

[freeagent]

Just build a second rig, one with the x3d and the other with the 5900x...
No need hassle of switching CPU anymore

I have a second rig, but my kids use it

 

[P4-630]

I have a second rig, but my kids use it

Ok..As third rig then..

 

[AVATARAT]

7900x
2x32GB@6600MT/s 30-37-35-49-88
2167 FCLK

 

[Paramount]

7900x
2x32GB@6600MT/s 30-37-35-49-88
2167 FCLK

View attachment 340901

impressive for dual ranked ram, what is your VDD & VDDQ volt

 

[AVATARAT]

1.42v for both.

 

[Atmaniac]

Slight improvement:

But that's it now. Can't go any lower with the primary timings, the sub timings are also maxed out. For 6800 DR a good result I would say

 

[opheen]

13600K - Msi MPG z790i EDGE Wifi - G.Skill 7600c34 2x16GB A-Die

7466c34

VCCSA 1.225v - VDDQ TX 1.4v - VDD2 1.42v - MEM VDD 1.45v - MEM VDDQ 1.45v (Set voltage in BIOS)

 

[TrantaLocked]

Patriot Viper Venom 5600 2x8GB PVV516G560C40K
Mid bin Samsung