• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Super Pi 1m scores

Status
Not open for further replies.
If you can help it, I'd recommend going with a newer Turion or at least a Clawhammer based Mobile 754 chip. They'll give you the best performance/ oc'ing results. I still have an MSI board that supports mobiles and I remember having a 4000+ Newark core Mobile in that thing! Now that was the pinnicle of power for socket 754! OC'ed to 3GHz easily on air cooling (Zalman CNPS7000B), consumed very little power and produced very little heat.

the turions do 3ghz to :D just have to make sure they are the s754 and not s1 chips
 
the turions do 3ghz to :D just have to make sure they are the s754 and not s1 chips

Thats good to know! I've always wanted to try out a Turion chip but I upgraded soon after they came out and sold off most of the important hardware. I still have the mobo and zalman cooler though so I just may give it a try someday, for sh**s and giggles! :D
 
you could always send me the mobo :roll: bet i could make my 3000+ explode b4 i finally put in my 3400 :D
 
you could always send me the mobo :roll: bet i could make my 3000+ explode b4 i finally put in my 3400 :D

If I actualy had it, I probably would to be honest! I haven't a clue where my MSI board is (it's an nForce 3 chipset board I believe) but I think I have an ECS s754 board sitting around someplace that I could send your way if you want it. It's micro atx and I can't remember off hand what chipset it is and probably has zero overclockability potential (at least from the BIOS prospective) but it's yours for the cost of shipping (again, assuming I can find it first).
 
lol no oc potential even my VIA set does its job (most of the time anyway)

find out the chipset and i would be happy SiS is supposed to oc just as good as NF3 as far as 754 goes
 
lol no oc potential even my VIA set does its job (most of the time anyway)

find out the chipset and i would be happy SiS is supposed to oc just as good as NF3 as far as 754 goes

LoL, have you noticed that we're basicaly carrying on the same conversation in two different threads?

Sorry to everyone and especialy giorgos th. for getting off topic here! :o I know it's a pain to have to read/sort through all this crap just to get to the actual topic related matter.
 
yeah it kinda amusing :roll:
 
my superi pi

:) :roll: :D

untitled123.jpg
 
Last edited:
I decided to update mine in here, since i went quad.
 

Attachments

  • 14.445s.jpg
    14.445s.jpg
    190.6 KB · Views: 394
damn i need to get a c2d but i am trying to hold off till AMD releases there cpu.Intel is making it hard to keep AMD because of the price drops the speed also the overclocks.come on AMD.
 
Am back from Antigua....when you have time would you put my score from post 877 on please Giorgos ;)
 
this is my new chip a e2160

for 30.00 after I sold my quad not to bad a deal I think I can hit 3.7ghz. Best I can do for now. The wallpaper is made by my 8 year old daughter so go easy. On board chip memory makes a big difference in this test but some serious bang for the buck here.

e2160 super pi.jpg
 
why did you get rid of the quad?
 
what are your temps with 1.525Vcore?
 
Well I think this is it for this e2160 on air rather good I think

I think this is now my all time favorite cpu unreal bang for the buck almost 1.9 ghz increase or over 100 %.

e2160028.jpg
 
Hot Hot Hot :roll:
measured by core temp 0.95.4:
idle 45c-50c
full load (all 4cores 100% load by prime95 small FFTs) after 5min ~85c
so too damn HOT!

i was right. :laugh: :toast: i am going to overclock again to see what i can get i don't think i can get better than my sempron because i can't get my bus speed that high with the X2 so i can't run my RAM as fast and the CPU isn't as fast but i am going to try.
 
It's one hot mother my e2160 that is.
 
you can also use cpu-z 1.41.0 to see the correct Vcore.
 
Status
Not open for further replies.
Back
Top