• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

The Ultimate Realtek HD Audio Driver Mod for Windows 10

That's weird, the soundblaster 720 or similar doesn't appear to be installed for your driver, DJ. Maybe im doing it wrong. Only the soundblaster connect is installed but not the soundblaster 720. I erased all except 1 of the .kga files, and ran the registery file (which should be only for dolby).
 
@grich only CTLNBK2HX2.kga is for sound blaster connect 720 UWP that you must to keep In C:\ProgramData\Creative\SoftwareLock. Desktop app 720 is not supported and dont touch the registry
 
Hi ! Have Asus strix sound card, is it possible to have modded drivers for it ?
 
MerolaC said:
I am goin crazy.
What should I install to get ONLY Dolby and DTS 5.1 vis Optical?
I don't care about any other APO or anything. Please, I beg for help!
My motherboard is an ASUS Maximus VIII Ranger. Codec is ALC1150

Please, help me!
Thank you!
Click to expand...

Install these drivers. Link below.
Just run setup.exe

Dolby
 
Teksik said:
Install these drivers. Link below.
Just run setup.exe

Dolby
Click to expand...
What/who made this driver? The poster you replied to already tried multiple modded drivers.
 
Hello Everyone, today I opened my Realtek Audio Program and I notice that was only one Output on Back Panel and another Output to Front Panel and look the Digital Output, my motherboard was output Digital by RCA and my PC isn't made by MSI, it's made by Asus.
I uninstalled the drivers and I installed again the same (With Sound BlasterX 720º).

The Chip is Realtek ALC883, so, it's a 5.1 controller and I Have a 5.1 Surround System.
Thanks for your Help.
Sorry for my bad English.
Sem Título.png
 
Diogo Silva said:
Hello Everyone, today I opened my Realtek Audio Program and I notice that was only one Output on Back Panel and another Output to Front Panel and look the Digital Output, my motherboard was output Digital by RCA and my PC isn't made by MSI, it's made by Asus.
I uninstalled the drivers and I installed again the same (With Sound BlasterX 720º).

The Chip is Realtek ALC883, so, it's a 5.1 controller and I Have a 5.1 Surround System.
Thanks for your Help.
Sorry for my bad English.View attachment 119226
Click to expand...
Also it is not my mod, not that I can remember, but check in "%systemroot%\System32\drivers" for the existence of the file "rtkhdaud.dat". If it exists, delete it and restart your PC.
 
Dj Urko said:
@Diogo Silva This is not my mod. you can look in page 1 first post to download the setup and instructions
Click to expand...
Alan Finote said:
Also it is not my mod, not that I can remember, but check in "%systemroot%\System32\drivers" for the existence of the file "rtkhdaud.dat". If it exists, delete it and restart your PC.
Click to expand...
No, isn't yours mods, it's maded by LynnMod
 
@Diogo Silva for that reason you still have a problems first delete rthdaud.dat from system32 - Drivers folder then if you want DTS interactive with neo pc use the mod from Alan Finote or if you want dolby digital output mod use my mod. everything is working fine in sound manager with these mods otherwise I cant help you
 
Alan Finote said:
Also it is not my mod, not that I can remember, but check in "%systemroot%\System32\drivers" for the existence of the file "rtkhdaud.dat". If it exists, delete it and restart your PC.
Click to expand...
Thank tou, Thank you, it works, you are a Master of all this and I notice the Subwoofer stayed with better bass, more louder.

Dj Urko said:
@Diogo Silva for that reason you still have a problems first delete rthdaud.dat from system32 - Drivers folder then if you want DTS interactive with neo pc use the mod from Alan Finote or if you want dolby digital output mod use my mod. everything is working fine in sound manager with these mods otherwise I cant help you
Click to expand...
Your driver or the Driver of Alan Finote outputs 5.1 Surround by HDMI Cable? For connect to my home Receiver Yahama RX-V363, it suports Dolby Digital Pro Logic and Silent Cinema and DTS Digital Surround ( I have Nvidia GPU) and internal GPU Intel.
 
I noticed that my nahimic no longer has any effect on the sound. At one point it was working and modifying the sound but it no longer works. I can run it, and I can click on play button the app but the sliders for treble bass voices do nothing at all to the sound.

Any ideas how to fix this?
 
Hello everyone , I just want to ask if I can enable dolby atmos for headphones other than the app from MS store on my Realtek ALC892 / SABERTOOTH X79 ?
 
raptori said:
Hello everyone , I just want to ask if I can enable dolby atmos for headphones other than the app from MS store on my Realtek ALC892 / SABERTOOTH X79 ?
Click to expand...
You use a modded driver from this forum that says that it contains Dolby Atmos, and you reopen Dolby Access and Atmos for headphone will be fully unlocked.
 
Dear DJ Urko,

Thank you for your driver mod!

I tried installing it on Gigabyte x99 Designare-ex and got NO sound output from the front 3.5 jack (neither waveout ot directsound).

I'm currently using generic realtek hda 8627 and they work well.

I'm on win 10 latest (10.0.17134.677) x64 enterprise.

ALC1150 Hardware ID:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1458A182&REV_1000
HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1458A182

Would love to hear your insights on how to get this going.

Thx & BR,
AstroAstro
 
Last edited:
raptori said:
Hello everyone , I just want to ask if I can enable dolby atmos for headphones other than the app from MS store on my Realtek ALC892 / SABERTOOTH X79 ?
Click to expand...
Just install Dolby Atmos driver from this website. You don't need to install Dolby Access, because Dolby Atmos has full features for headphone

Dolby Access only works when you have 7.1 sound source, with 2-channels audio source Dolby Access does not work. But Dolby Atmos driver can create virtual surround from 2-channels audio sources

Do not use Dolby Access when using Dolby Atmos driver, because you will increase reverb for virtual surround, it will have worse sound quality.
 
consoled said:
Just install Dolby Atmos driver from this website. You don't need to install Dolby Access, because Dolby Atmos has full features for headphone

Dolby Access only works when you have 7.1 sound source, with 2-channels audio source Dolby Access does not work. But Dolby Atmos driver can create virtual surround from 2-channels audio sources

Do not use Dolby Access when using Dolby Atmos driver, because you will increase reverb for virtual surround, it will have worse sound quality.
Click to expand...
Dolby Access is required to enable spatial sound Dolby Atmos for Headphone. Thus both Access and Atmos needs to be installed.
Access will not ask for trial/payment when Atmos APO is present.
 
CityCultivator said:
Dolby Access is required to enable spatial sound Dolby Atmos for Headphone. Thus both Access and Atmos needs to be installed.
Access will not ask for trial/payment when Atmos APO is present.
Click to expand...
No need to install Dolby Access. Because the Dolby Atmos driver also has Dolby Atmos for headphones. Remove Dolby Access and disable 7.1 virtual surround in Spartial Sound. Because Dolby Atmos drivers can create effects without the need for Spatial Sound for headphone
 
Last edited:
You must log in or register to reply here.
Back
Top