• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Thermal paste applied on your GPU / CPU, survey!

Did you always use the same TIM on your hardware?

  • Yes I do use the same one…Always!

    Votes: 136 47.6%
  • No I don’t have any preferred or "trusted brand"

    Votes: 100 35.0%
  • If I could I would! not always have stock of the same products!

    Votes: 50 17.5%

  • Total voters
    286
Update :rockout:

Video Card: Nvidia GeForce GTX 980 Reference: Stock paste & thermal Pads
Previous temps:
idle:
35-38
Load: 79-85


Video Card: Nvidia GeForce GTX 980 Reference: Arctic MX4 & Actic Thermal Pad (1mm):
Current temps:
idle:
27-31
Load: 71-78


Decided to give a fresh TIM application on this babe, thermal pad replace with some pieces of a thermal pad a friend had lying around there, sadly was way too old and little bit hard, I was able to replace almost all thermal pads, so in a near future I'll replace all of them with a brand new thermal pad, this is my first time replacing thermal pads on video cards vi the way!


Feel free to post any TIM re-application and comments about the topic!
:lovetpu:


Regards,

Nice result!

However I won't do that with my MSI card, I think they have used a quality TIM on these already, mine runs 26 idle and around 55 load.
 
Nice result!

However I won't do that with my MSI card, I think they have used a quality TIM on these already, mine runs 26 idle and around 55 load.
well getting 55 load on an air cooler its a complete dream !
i always test the video card first, then if the results arent as good as i like, well i would replace TIM, also the idea of testing the arctic thermal pads was from a friend!

Regards,
 
well getting 55 load on an air cooler its a complete dream !
i always test the video card first, then if the results arent as good as i like, well i would replace TIM, also the idea of testing the arctic thermal pads was from a friend!

Regards,

I must say I have a 20 degrees C ambient temp during winter, it may be warmer where you live.
 
it may be warmer where you live.
so much, i live pretty near to some beaches and plenty mountains, pretty tropical weather here! and could be pretty ass chilling temps at night too, so its a wonderfull place to live!

Regards,
 
Thermalright Chill Factor 3 on CPU, Coollaboratory Liquid Ultra on GPU. Better get some more CLU when I get a 7600K and delid it.. :rockout:
 
Thermalright Chill Factor 3 on CPU, Coollaboratory Liquid Ultra on GPU. Better get some more CLU when I get a 7600K and delid it.. :rockout:

i have heard that i5's arent that hot, all my i5's on WCG farm are chilled compared to i7's that tend to get hotter compared to i5's, but its a great start for all temps to delid!

Regards,
 
i have heard that i5's arent that hot, all my i5's on WCG farm are chilled compared to i7's that tend to get hotter compared to i5's, but its a great start for all temps to delid!

Regards,
I'm going for ~5GHz, so.. :D
 
I'm going for ~5GHz, so.. :D
quite interesting adventure you will have, about your current Intel Pentium G4400, its it delidded too ?

Regards,
 
quite interesting adventure you will have, about your current Intel Pentium G4400, its it delidded too ?

Regards,
Nope, installing a non-K OC bios is a hell, so I'm not going to do it, so this is running with stock clocks. :(
 
Nope, installing a non-K OC bios is a hell, so I'm not going to do it, so this is running with stock clocks. :(
how it performs? temps ?
have a great cooler, by the way ...
 
Great temps, indeed, also have you ever consider glue back IHS when delid?

Regards,
Dunno, I won't delid this G4400 but I'm not gluing (is there a typo? English isn't my natural language) 7600K's IHS back when I get one and delid that bastard :rockout:
 
It's about 4.5 over the limit. :D
 
For Cpu I applied cooler master thermal paste and its cool.
 
#techsupportgore :eek:

11111543_494126630744454_919220704_n.jpg


#Germanwirehairedpointergore?

:laugh:
 
Arctic Ceramique

1 year

Gpu spread method temps 75c

Cpu center line method 76c delided waterblock to bare dye

4.5 Ghz 1.323 Vcore
 

Attachments

  • Untitled1867.jpg
    Untitled1867.jpg
    975.2 KB · Views: 321
People on this thread don't really seem to know how to apply thermal paste, so here's an animation showing the correct way to do it. Watch the video carefully and note the special brand of thermal paste on the tube...

Click the picture for instructive animation.



@peche, @CAPSLOCKSTUCK, @dorsetknob, @rtwjunkie and @eidairaman1, I think you guys need the most help with this delicate operation.
 
People on this thread don't really seem to know how to apply thermal paste, so here's an animation showing the correct way to do it. Watch the video carefully and note the special brand of thermal paste on the tube...

Click the picture for instructive animation.



@peche, @CAPSLOCKSTUCK, @dorsetknob, @rtwjunkie and @eidairaman1, I think you guys need the most help with this delicate operation.

As I noted earlier, he's not using nearly enough thermal mayo.
 
As I noted earlier, he's not using nearly enough thermal mayo.
Yes, good point. It doesn't quite squish out the side enough, does it?
 
Yes, good point. It doesn't quite squish out the side enough, does it?

Yeah. He could punch it hard to help that, but honestly just using more mayo would work too.
 
Yeah. He could punch it hard to help that, but honestly just using more mayo would work too.
I wonder if using the Light (Low Cal, Diet) or Full Fat version would make a difference? I say go Full Fat for that extra flavour and squishiness. Waddya think?
 
I wonder if using the Light (Low Cal, Diet) or Full Fat version would make a difference? I say go Full Fat for that extra flavour and squishiness. Waddya think?

If it comes in a syringe, I say it's legit.
 
Back
Top