- Joined
- Sep 29, 2008
- Messages
- 81 (0.01/day)
Processor | Q6600 @ 3.0 |
---|---|
Motherboard | Asus P5K-PRO |
Cooling | Zerotherm ZT-10D |
Memory | 6 GB DDR-II 667 mhz |
Video Card(s) | Gigabyte GTX 960 |
Storage | 2 SATA RAID 0 arrays, 1 SSD |
Display(s) | 23" Wide TFT + 14" 4:3 TFT |
Case | Custom twin tower |
Audio Device(s) | onboard |
Power Supply | Dual PSU mod (2x 550W) Rasurbo BP-XII550 |
Software | Win7 x64 |
As the title says i'm in the situation that vista seems impossible to install (Vista Bussines x64)
The story goes like this.
1) Boot from DVD
2) Loading bar appears and load, picture displays.
3) After 10 minutes of starring into the picture the welcome screen appears (way to much to wait)
4) I select the language, keyboard etc (defaults are ok for me)
5) Next, and i select Install now
6) Please wait screen appers with background picture
7) After another 10 minutes, the windows customize install appear (way to much to wait)
8) i manage my hard drives / partitions and click ok
9) Hourglass is displayed, and after another 10 minutes (way to much to wait) the following error is thrown:
E:\SOURCES\INSTALL.WIM can't be read or checksum failed (error code: 0X8007000D)...
I'm using a legitimate copy of a volume licensing. I have the ISO and it has been burnt until now onto 7 new blank DVD's (two brands, verbatim and TDK) with 2 different writers (Asus and LG). The same error appears each time. I have burnt the iso at low speed (4x) and did a disk check-up with imgBurn. I have also installed directly from the iso to a vmware virtual machine, and in 20 minutes was done and working great
On the hardware side i have tried to install with bios default, with bios customized by me, with most stable setting i could think of, with only 1 stick of RAM (2GB)...the same error appears each time. As desperate measures i have tried to disconnect all hard drives, disabled advanced halt state, turned off vanderpool, ..still no joy.
PS: the OS should be installed onto a RAID 0 array made from two 80 GB Sata maxtors
PS2: The configuration I'm trying to install is in my system specs.
Thanks
The story goes like this.
1) Boot from DVD
2) Loading bar appears and load, picture displays.
3) After 10 minutes of starring into the picture the welcome screen appears (way to much to wait)
4) I select the language, keyboard etc (defaults are ok for me)
5) Next, and i select Install now
6) Please wait screen appers with background picture
7) After another 10 minutes, the windows customize install appear (way to much to wait)
8) i manage my hard drives / partitions and click ok
9) Hourglass is displayed, and after another 10 minutes (way to much to wait) the following error is thrown:
E:\SOURCES\INSTALL.WIM can't be read or checksum failed (error code: 0X8007000D)...
I'm using a legitimate copy of a volume licensing. I have the ISO and it has been burnt until now onto 7 new blank DVD's (two brands, verbatim and TDK) with 2 different writers (Asus and LG). The same error appears each time. I have burnt the iso at low speed (4x) and did a disk check-up with imgBurn. I have also installed directly from the iso to a vmware virtual machine, and in 20 minutes was done and working great
On the hardware side i have tried to install with bios default, with bios customized by me, with most stable setting i could think of, with only 1 stick of RAM (2GB)...the same error appears each time. As desperate measures i have tried to disconnect all hard drives, disabled advanced halt state, turned off vanderpool, ..still no joy.
PS: the OS should be installed onto a RAID 0 array made from two 80 GB Sata maxtors
PS2: The configuration I'm trying to install is in my system specs.
Thanks