• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

X800 GTO² to X850 XT BIOS Mod

Goof Off or other xylene-based cleaners also work very well (and are also recommended by Arctic Silver). Those cleaners can be purchased at any hardware or home improvement store so they may be easier to find. I think that rubbing alcohol contains too much water to be very effective. BTW, when I removed my HSF there was hardly any compound on my RAM and a large gob on the GPU - quickly applied, I guess.
 
I noticed that you said it booted 2 out of 3 times then refused to boot afterwards. It's possible that maybe you didn't get good contact between the gpu and the heatsink and your gpu is burned out... Did you check to see if it was making good contact with it or not?
 
ShadowFlare said:
I noticed that you said it booted 2 out of 3 times then refused to boot afterwards. It's possible that maybe you didn't get good contact between the gpu and the heatsink and your gpu is burned out... Did you check to see if it was making good contact with it or not?
Click to expand...
This is what I'm worried about =/
Hence why I removed the entire thing.
 
Oops, that was me above.
ANyway, that's what I'm worried about.
Probably a bit more than 2... it was just an issue with my HDD.
If it did fry, I think I'll be able to RMA it (just stick the old stuff back on...)
As I still have my 30 day OEM warranty.
Going to buy some thermaltape/grease/etc. now...
--Trevor
 
That's probably why the price dropped to 199 again--They were intending to bring it up to 299, but a typo?
 
Pentium D said:
I got mine from newegg for $199
Click to expand...

Yeah First it was 229.99 (I think) then 199.99 then it went of of stock and the page was "disabled". Now its back at 299

That pisses me off, I dont know if I am ever gonna get this card
 
Agp Version From Computerhq??

Ok, someone asked a few posts back what the difference was between part number 100131 and 100130 that most of you have been getting. Did anyone else notice that computerHQ is claiming to have an AGP VERSION of the GTO2???

Is this for real? I think I might have to take a chance on this...
 
Agp Gto2

well, I just took a chance and ordered one of the agp versions. I'll keep you all posted if the agp version works anything like the pci-e has been for everyone else!
 
Yea I just purchased an AGP version of it from excaliberpc and there is actually a description of it. I'll also update as I get it and such.
 
Trevor said:
Scratch that, did a quick hack-job on it =) Installing the rest of the cooler now.
Click to expand...

Can you explain what part didn't fit and how you fixed it? I'm planning on getting a Zalman too with my GTO2.
 
the ram sinks didnt fit so he just cut a little bit off the end to get it to fit, it wont affect the performance so dont worry, the zalman vf700 is the best cooler imo.
 
Dr.D said:
Actally I did some reasearch and that was on revision 1, not revision 2
Click to expand...
sorry it took so long to respond to this..... actually I have a revision 2, well that's what it said on the package.
 
Ulocked Connect x800GTO

Just to let people know that I too have managed to unlock the full 16 pipes on this card.

R423 core
 
I want to run my X800_GTO2 as X850XT speed Full time instead of open ATI Tool everytime I reboot my computer.

Can I just flash it to X850_XT or X850_XTPE?
(of course with non-VIVO one, if there is.)
 
Ok... so, I need thermal tape for the ramsinks.. anyone know where I can buy it, pref. locally? (I.e., what kind've stores might have it..)

Someone said to just use scotch tape, but that sounded absurd, to say the least.
 
You should be able to find thermal interface tape/pads in any computer store with component-level products since they are replacements for the material used on OEM coolers on old Intel and AMD processors. Locally I've bought at Fry's where they have .75" and 1.5" widths. Or you can order from the manufacturer of your ramsinks.

As for whoever proposed scotch tape :nutkick:
 
SSID mismatch on Sapphire GTO2

Hi;

I got the Sapphire X800GTO2 'Retail Lite' version. If I try to flash up to 16 pipes (using Sapphire.X800GTO2_16p.Samsung16.bin and flashrom16) I get:

BIOS DEVID= 0x5D4F
ASIC DEVID= 0x5D4F
Exsisting SSID= 0x1600
New SSID= 0x0302

and says I would need to force the flash.

Is it supposed to do this? (the article doesn't mention needing to 'force' the flash). I don't see anyone else mentioning this problem flashing their GTO2 cards.

Is this because it's a 'retail' instead of EOM card? Is it safe to force the flash?

Thanks;
 
mod BIOS for AGP?

Is the modified BIOS shown in the guide for PCI-E only? Is there any difference between the BIOS for AGP and PCI-E? If so, any idea what to do for the AGP version?
 
my case runs extremly hot with new card

loving the gto2 but my case gets awfly warm and i cant get the card to overclock past 500 540 without there being artifacts i have to keep my fans cranked and 100% just to keep my case at about 45c while playing a game i just dont understand why i cant overclock higher i tried ocing it with a house fan right on the card and still no luck could it be cause i bout a sony pc i still get a decent score on 3d mark of 5700
 
RobP4P said:
Is the modified BIOS shown in the guide for PCI-E only? Is there any difference between the BIOS for AGP and PCI-E? If so, any idea what to do for the AGP version?
Click to expand...

am curious regarding this also...
 
I say you probably shouldn't try the modified bios on the agp version. Instead follow the instructions I posted earlier. That will basically make your own modified bios with 16 pipelines. :) If you want, you could even save the 16 pipeline bios after you are done.
 
You must log in or register to reply here.
Back
Top